Ammeters

Digital Multimeter has pen-based design.
Multimeters

Digital Multimeter has pen-based design.

Model PM-1 Digital Pen Meter measures DC and AC voltage to 600 V and resistance to 40 MW, and also includes continuity, diode, and frequency tests to 10 KHz. Compact unit features data hold, relative value, and auto range buttons along with 4-digit LCD that displays value, mode, and low battery indication. Suited for general electrical testing and troubleshooting, it also has red and black test...

Read More »
Multi-Function Pen Meter facilitates electronics testing.
Miscellaneous Meters

Multi-Function Pen Meter facilitates electronics testing.

Equipped with LCD and non-contact voltage sensor, Pen-Style Digital Multimeter measures, tests, and troubleshoots any electronic device or circuit board. Unit measures AC/DC voltage, minivolts, current, and resistance for capacitor checks, level tests, diode tests, and continuity tests. Operating on two AAA batteries, pocket tool includes max value hold, data hold, automatic power shutoff,...

Read More »
Digital Multimeters feature AC/DC current clamp.
Multimeters

Digital Multimeters feature AC/DC current clamp.

Comprising 10 different models, HHM590 Series has GS-Mark EN61010-1 Approval Voltage Category III 600 V, Pollution Degree II. Units provide 1,999, 2,500, 3,999, and 4,300 count resolution as well as Max, Data Hold, Peak, and Ã-† Zero functions. Measuring 9.9 x 3.9 x 1.8 in., all clamp-on meters include set of safety test leads, 9 V alkaline battery, and operator's manual. Temperature models...

Read More »
Ammeters

True-RMS AC/DC Clamp Meter features detachable jaws.

Featuring thin jaw design, Fluke 365 measures current up to 200 A ac/dc while allowing access to wires in PLCs and other tight spaces. Unit measures up to 600 Vac/Vdc and provides 6,000 W resistance measurement as well as continuity detection. Backlit display automatically shows correct measurement range, while built-in flashlight helps illuminate work location and identify wires. Meter is safety...

Read More »
Fluke Introduces Industry's Most Advanced Family of Clamp Meters, Engineered for the Most Demanding Conditions
Ammeters

Fluke Introduces Industry's Most Advanced Family of Clamp Meters, Engineered for the Most Demanding Conditions

New features increase flexibility, safety and performance EVERETT, Wash. - Fluke Corporation, the global leader in portable electronic test and measurement technology, has introduced the industry's most advanced, capable and comprehensive family of clamp meters, designed to meet every requirement for testing and maintaining electrical systems, industrial equipment and controls, and commercial and...

Read More »
Clamp Meter can be used in electrically noisy areas.
Miscellaneous Meters

Clamp Meter can be used in electrically noisy areas.

Industrial-grade 660/1000A TightSight(TM) is ergonomically engineered and features bottom display for safe reading from almost any angle. High Frequency Rejection (HFR) makes meter immune to electrically noisy areas when measuring ac current, dc current, ac/dc voltage, frequency, resistance, or capacitance. While slim tapered jaws and hook tip facilitate reaching into crowded cable bundles,...

Read More »
Industrial Clamp Meter is immune to electrical noise.
Miscellaneous Meters

Industrial Clamp Meter is immune to electrical noise.

TightSight(TM) Clamp Meter has High Frequency Rejection to assure accuracy when measuring in noisy electrical environments or with complex waveforms. Unit includes TightSight bottom display that enables reading from any angle, slim tapered jaws and hook tip that reach into crowded cable bundles, and low battery indicator. Featuring True RMS, CAT IV, or CAT III safety ratings, it is available in...

Read More »
Swivel Clamp Meter allows easy viewing of measurements.
Miscellaneous Meters

Swivel Clamp Meter allows easy viewing of measurements.

Featuring 180° rotating head, Model ACD-21SW provides unobstructed view of 3Â-½ digital LCD in hard-to-reach places. Unit measures AC current up to 400 ACA, AC/DC voltage up to 600 V, resistance, capacitance, temperature, and continuity with measurement rate of 2 times/sec. Accommodating conductors up to 1.18 in., meter includes auto power off, data hold, and low battery indication....

Read More »
Industrial True RMS Clamp Meter has CAT IV safety rating.
Power Meters

Industrial True RMS Clamp Meter has CAT IV safety rating.

With large jaw to accommodate wide diameter wires, Model ACDC-3400 IND suits industrial applications/utilities that require extra level of safety. Featuring True RMS sensing for accuracy, it measures AC current up to 1,000 ACA, voltage up to 750 Vac/1,000 Vdc, frequency, resistance, capacitance, and duty cycle. Unit has overload protection of 1,000 Vdc or 750 Vac rms. Safety CAT IV 600 V, CAT III...

Read More »
Clamp Meter transmits readings to FLIR IR cameras.
Miscellaneous Meters

Clamp Meter transmits readings to FLIR IR cameras.

Featuring built-in IR thermometer with laser pointer for hot-spot detection, 1,000 A CAT IV Model EX845 utilizes METERLiNK(TM) technology to wirelessly connect to FLIR IR cameras via Bluetooth(TM), accelerating IR inspections and diagnostics. True RMS meter functions include AC/DC current, voltage, resistance, capacitance, frequency, infrared and contact temperature, diode-test, and continuity...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics