Ammeters

Measuring Equipment

Source Measure Unit provides 10 pA measurement sensitivity.

Offering 4 channels and sampling rate up to 600 kS/s for measuring fast transient responses, Model NI PXIe-4143 is suited for parallel testing of multipin semiconductor devices. Unit provides 4-quadrant output capability of 24 V at 150 mA, complementing preexisting NI SMU capabilities for sourcing and sinking. With NI SourceAdapt technology, engineers can custom tune SMU response for any device...

Read More »
CAS DataLoggers Introduces New Low Cost Clamp-on Meters
Power Meters

CAS DataLoggers Introduces New Low Cost Clamp-on Meters

The Only 1000V CAT IV Rated Clamp-On Meter on the Market! CHESTERLAND OH - Workers in electrical maintenance, power distribution, and industrial maintenance need a low-cost solution for projects such as AC/DC motor testing, power plant troubleshooting, and many others. With them in mind, CAS DataLoggers now carries the new AEMC Models 407 & 607 Clamp-On Meters, the only 1000V CAT IV rated...

Read More »
Miscellaneous Meters

Digital Multimeters offer nonelectrical contact testing function.

Featuring IEC61010 600V CAT IV rating, Models 5231 and 5233 provide volt, ohm, continuity, and diode functions. Model 5233 additionally offers capacitance, frequency, duty cycle, and ammeter functions. Using current clamp accessory, Model 5231 performs AC/DC direct reading current measurements up to 600 A, while Model 5233 can measure up to 10 A directly and can measure temperature in °C or...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Multifunctional Tester monitors indoor air quality.
Miscellaneous Meters

Multifunctional Tester monitors indoor air quality.

Utilizing variety of interchangeable modules and probes, Model AMI300 can measure CO, CO2, temperature, humidity, air flow, air velocity, and both current and voltage. Unit is equipped with speed tachometer, Ice Blue LCD, battery indicator, and Min/Max/Hold/Unit selection. Featuring shockproof ABS housing with IP54 dust protection, Model AMI300 provides up to 12,000 memory data points with...

Read More »
Miscellaneous Meters

Power/Harmonic Clamp-On Meters have 1,000 V CAT IV safety rating.

Rated for safe operation at building electrical supply source, IP54-rated Models 407 and 607 offer wirelessly data extraction via Bluetooth technology and perform standard measurement of volts, amps, frequency, resistance, and continuity. Units also measure TRMS Voltage and Current as well as AC+DC with Min/Max/Avg and CF display. Further able to measure all types of InRush, meters are capable of...

Read More »
Miscellaneous Meters

Clamp-On Meters carry 1,000 V CAT IV safety rating.

Featuring IP54 construction, Models 401, 403, 601, and 603 can measure volts, amps, frequency, resistance, and continuity at building's electrical supply source. Products measure all types of InRush(TM), even those due to load increases on installation that is already up and running. Peak and RMS InRush values are captured at 1 msec sample rate and 100 msec duration windows. Meters measure...

Read More »
Miscellaneous Meters

Clamp-On Meters feature 1,000 V CAT IV safety rating.

Safe to operate at source of building electrical supply, Model 405 measures TRMS voltage and current of 1,000 Vac/Vdc and 1,000 Aac/1,500 Adc, while Model 605 measures 1,000 Vac/Vdc and 2,000 Aac/3,000 Adc. IP54-rated units also measure all types of InRush, even those due to load increases on installation which is already up and running. Both Peak and RMS InRush values are captured at 1 ms sample...

Read More »
Energy Meters

Submetering Kit monitors voltage, current, and power factor.

With Electrocorder EC-7VAR Kit, users can view onsite power consumption in kilowatt hours, as well as identify voltage supply faults and power spikes. Three-phase meter is available in 4 models recording at amp ranges from 4 A to 3 kA. Using constant data sampling technique, logger samples each cycle multiple times for up to 300 days of continuous recording. All models include logger, 4 voltage...

Read More »
Semiconductor Source Meter suits high power testing.
Miscellaneous Meters

Semiconductor Source Meter suits high power testing.

Optimized for testing diodes, FETs, and IGBTs, Model 2657A High Power System SourceMeter® Instrument can source and sink up to 180 W of DC power at up to 3,000 V. Unit's 6Â-½-digt measurement engine enables 1 fA current measurement resolution to support low-leakage requirements of power semiconductor devices. Model 2657A provides choice of digitizing or integrating measurement modes...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers