Air / Hot Air Dryers

Drying System dries solvent and water-based inks.
Air / Hot Air Dryers

Drying System dries solvent and water-based inks.

Featuring flat or vertical design, Sheet and Web Contact Drying System thoroughly dries wet inks from material surface to top side, avoiding residual moisture problems. System uses heated vacuum plate with transport belt on bottom of material being dried. Integrated heated air blower furthers drying process and helps eliminate solvent fumes. With system, screen printed materials that previously...

Read More »
RF Web Drying System can operate at speeds up to 1,500 fpm.
Air / Hot Air Dryers

RF Web Drying System can operate at speeds up to 1,500 fpm.

Designed for high-speed drying of water-based patterned glue and coatings, Macrowave(TM) RF Drying System selectively heats only patterned coatings on web and leaves bound moisture in substrate intact, preventing over-drying, distortion, and shrinking. It needs 1/3 to 1/5 of floor space required for hot air and IR dryers, and permits lower web temperatures. Unit can handle webs up to 120°...

Read More »
Compact Dryer can handle up to 600 lb of product/hr.
Air / Hot Air Dryers

Compact Dryer can handle up to 600 lb of product/hr.

Able to remove moisture to enhance shelf life of fresh-cut produce, Compact Dryer is suited for small to medium volume fresh-cut processors producing variety of products such as shredded and chopped lettuce, leafy salad mix, cabbage, and cut vegetables. Designed to withstand harsh, hot water washdowns, stainless steel unit can be sanitized inside and out, and features magnetic lock with smooth...

Read More »
Dewatering-Drying system removes oversize/undersize particles.
Air / Hot Air Dryers

Dewatering-Drying system removes oversize/undersize particles.

Model K30-2-SS 30 in. dia circular vibratory screener integrated with Model K40/48-1FBD-SS 40 in. dia circular fluid bed dryer remove off-size particles while dewatering and drying on-size material. System removes up to 50 gpm of water and dries up to 700 lb of on-size particles per hr. Screener is equipped with imbalanced-weight gyratory motor that vibrates screening chamber, which is suspended...

Read More »
Air / Hot Air Dryers

Vibratory Screener-Fluid Bed Dryer has circular design.

Self-contained system scalps and de-dusts 2,500-3,000 lb of bulk material per hour using double-deck, 30 in. dia circular vibratory screener and then dries material in 40 in. dia circular vibratory fluid bed processor. Requiring one air inlet and outlet, system is designed to remove oversize and undersize material while drying only on-size material. Elements of construction include...

Read More »
Infrared Conveyor Dryer suits in-line pad printing.
Air / Hot Air Dryers

Infrared Conveyor Dryer suits in-line pad printing.

Measuring 60 in. long, Model PP1860-W-1 conveys pad printed parts through drying chamber for post-treatment. Conveyor belt is 18 in. wide with 6 in. clearance inside chamber, which is 30 in. long. Temperature at face of heating element reaches 700°F, and at belt level, temperature is approximately 300°F. Unit comes equipped with adjustable heat shields at both ends of chamber, and...

Read More »
Infrared Web Dryer Cures Ink on Paper Napkins
Air / Hot Air Dryers

Infrared Web Dryer Cures Ink on Paper Napkins

Wisconsin Infrared Systems designed and manufactured an Electric Infrared Web Drying System, for the paper industry to dry ink on lightweight paper webs running at 1,200 FPM. This IR oven was specifically designed to dry water-based ink on a paper web which is processed into napkins for the fast food industry. The dryer has three (3) 14 in. long dryer housings with two (2) 5- 1/2 in. wide exhaust...

Read More »
Air / Hot Air Dryers

Plastics OEM, Thoreson-McCosh, Integrates Total Controls System Solution with Siemens SIMATIC S7-200 Micro PLCs

Modern production and processing machines are required to satisfy ever-increasing demands for productivity, cost effectiveness and flexibility. Shorter throughput times and faster retooling are expected norms for an efficiently-operating plant. Eliminating costly disturbances and downtime resulting from maintenance work, or the lack of it, is critical to maintaining process flow and...

Read More »
Air / Hot Air Dryers

First Scientific Comparison of Resin Dryers Shows Why Industry Will Shift to New, More Efficient Drying Systems

As Only Supplier of All Dryer Types, NOVATEC Predicts Major Move from Twin-Bed to Wheel Dryers, Plus Strong Growth for Vacuum and Membrane Systems BALTIMORE, MD, U.S.A., June 18, 2007: Building on its position as the only manufacturer of every type of resin drying system used in the plastics industry, NOVATEC, Inc. recently began scientifically rigorous comparative testing of its drying...

Read More »
New Type of Resin Dryer Eliminates Moving Parts and Desciccant, Cuts Maintenance and Operating Cost, Enhances Part Quality
Air / Hot Air Dryers

New Type of Resin Dryer Eliminates Moving Parts and Desciccant, Cuts Maintenance and Operating Cost, Enhances Part Quality

Unique, Commercially Proven Maguire® NovaDrier(TM) Compressed Air / Membrane System Will Make European Debut at Maguire Europe Exhibit during K-2007 TAMWORTH, STAFFORDSHIRE, UK, June 27, 2007: Highlighting the Maguire Europe exhibit at K-2007 will the introduction to the European marketplace of the world's only compressed air / membrane resin dryer, a system so simple and efficient that it...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers