Pneumatic Clamping Lifter rotates delicate material.
Handling Equipment

Pneumatic Clamping Lifter rotates delicate material.

Below-the-hook Model CK350 picks up material and orients it for insertion into processing or assembly equipment. Two pads maneuver material from sides, evenly distributing clamping pressure. Clamping forces applied through pneumatic cylinders are adjusted with air regulator. Hand-powered gearbox controls multi-axis rotation. Air reservoir and check valve maintain clamping pressure. Lifter...

Read More »
PID Controller handles batch and continuous processes.
Controls and Controllers

PID Controller handles batch and continuous processes.

Model 535 1/4 DIN single loop controller can monitor and control temperature, pressure, level, and flow. PowerTune® delivers pretuning, adaptive tuning, and powerback anti-overshoot. It constantly analyzes process and makes modifications to tuning parameters for long term, stable control. Models are available with 4-20 or 0-20 mA analog control signal, alarm trip outputs, and RS-485...

Read More »
Cutting/Stripping Machine is heart of wire processing line.
Stripper Machines

Cutting/Stripping Machine is heart of wire processing line.

MegaStrip 9600 automatically cuts and strips wires and cable up to 1 in. in diameter and flat ribbon cables up to 4 in. wide. It can be programmed via front panel on machine or with Cayman PC software. Cutting head can be fitted with up to 4 blade pairs. MegaStrip 9600 includes slitting unit for axial separation of cable, moveable cable guides to prevent cable jams, and range of interfaces for...

Read More »
Dairy Separators have hydrohermetic seal.
Clarifiers

Dairy Separators have hydrohermetic seal.

HyVOL separators and clarifiers offer sealing technology that is 100% wear free and requires no water for operation. Hydrohermetic seal uses milk itself as seal and never needs maintenance. Units feature high-capacity designs, USDA accepted solids discharge, and low energy requirements.

Read More »
Die-Cutting System processes magnetic material.
Cutters and Cutting Machinery

Die-Cutting System processes magnetic material.

Sheet- or roll-fed die-cutting system is suitable for sheet or web production. Printed paper goes through heated over-laminate unit, then receives under-laminate of magnetic material. Optically registered die-cutter cuts out product. Finished product is knocked out of web at knock-out station, conveyed to operator, and remaining matrix is scrap cut. Product can also be left in web, sheeted into...

Read More »
Thermal Isolator extends temperature range of accelerometers.
Isolators

Thermal Isolator extends temperature range of accelerometers.

Accelerometer Thermal Isolator (ATI) enables low-impedance output accelerometers to operate on test surfaces with high temperatures. It is constructed from 0.325 in. thick, amorphous polymer that is characterized by low thermal conductivity, chemical resistance, and natural flame resistance. Maximum service temperature is +171°C. Accelerometer can be mounted to thermal isolator via cap...

Read More »
Cyber Manufacturing System can sort and stack finished parts.
Cutters and Cutting Machinery

Cyber Manufacturing System can sort and stack finished parts.

Laser CMS (Cyber Manufacturing System) combines efficiency of automated material retrieval, loading, cutting, and unloading with networked communication to downstream operations and other departments. CMS is able to schedule consistent production of up to 4 lasers. CAD/CAM system separates design into components, figures bend allowances, and issues dimensioned manufacturing drawings for cutting,...

Read More »
Drill provides chip control.
Drills

Drill provides chip control.

Unidrill® features UC-CCR chipbreaking geometry, which is suitable for drilling steels and stainless steels in diameters from 0.531 to 1.000 in. Corner radii reduce thermal stress, minimize break-out at back of hole, and improve surface finish. Clamping system assures precise insert location, and CVD coating (SC7052) allows high feed rates at low speeds.

Read More »
Cutters and Inserts handle heat resistant alloys.
Inserts

Cutters and Inserts handle heat resistant alloys.

Made with ceramic grade Kyon 2100, cutters work at speeds of 3000 sfm to rough mill nickel, cobalt, and iron based heat resistant alloys. Cutters and inserts also machine Waspalloy, Haynes 25, Inconel 718, Stellite and similar materials at cutting speeds of 2000 to 4500 sfm and feed rates of 0.002 to 0.005 ipt. Also available are KC9110 and KC9125 inserts, both with 3 coating layers: TiCN,...

Read More »
High Torque Drills have powerful motor.
Drills

High Torque Drills have powerful motor.

Models 1680-20 and 1680-21 Super Hawg(TM) 1/2 in. drills have 13 A motor, low speed clutch that protects gear train from sudden high-torque stalls, and rotation speed selector for smooth Hi/Low shifts. Heavy duty helical and spiral bevel gearing are housed in metal gear case for bearing and spindle support. Roto-Lok(TM) left/right rear handle allows operator to maintain grip and body position and...

Read More »

All Topics