Modular Control System remotely controls air compressors.
Controls and Controllers

Modular Control System remotely controls air compressors.

Regulus® PLC-based modular control system features color graphical touchscreen HMI for user adjustment of set-points and control mode changes. Controls are adaptive, changing to meet specific user needs. System stores and logs operating data for trend monitoring and preventive maintenance. Unit is suited for operation close to surge lines to save power and minimize unloading, and lower...

Read More »
Mining Jumbo employs twin boom design.
Drills

Mining Jumbo employs twin boom design.

Axera 7 mining jumbo suits applications where heading size ranges from 4 x 4 to 6 x 6 m. Equipped with HLX5-series hydraulic rock drill with 20-22 kW percussion power rating, product drills cross-cuts and bolt holes as well as blast holes from 1 11/16 to 2½ in. It works with drifter rods up to 16 ft long and comes with two 55 kW electro-hydraulic power packs and articulated carrier with...

Read More »
Coolant Separator features over-the-belt tank.
Separators

Coolant Separator features over-the-belt tank.

ConSep® CrosBelt(TM) Coolant Cleaning Separator combines technologies of single-platform chip conveyor and coolant cleaning system with sloped bottom coolant tank integrated into vertical orientation. Large clean out portals at bottom facilitate sludge removal and cleaning. Since ports are located at bottom of tank, pump equipment and filter devices do not have to be removed and...

Read More »
Cutting Systems offer wear resistance.
Blades

Cutting Systems offer wear resistance.

Cutting Blades and Systems are custom-designed to optimize cutting, shredding, or scraping processes. Blades, cutters, knives, shredders, and shear bars are made with specific angles, pitch, and shear for proper introduction to process. Manufactured from materials that match application, such as steels and alloys, cutting systems are available with wear-resistant, tungsten carbide hard-facing or...

Read More »
Water Jet Foot Control is suited for various applications.
Controls and Controllers

Water Jet Foot Control is suited for various applications.

Usable at any pressure from 10,000-24,000 psi and flows to 35 gpm, FC24-286 is made of non-corrosive materials and weighs 31 lb. Product comes with quick-change cartridge valve that can be replaced in field within 60 sec. Pedal design lets operator dump pressure immediately, and dual dump ports maintain valve stability during use. Control is suited for use with convertible water jet pump units.

Read More »
Vacuum Extractor facilitates unattended operation.
Unloaders

Vacuum Extractor facilitates unattended operation.

Suited for twin-spindle CNC lathes, VacXtract unloading device removes work pieces through rear of right spindle in under 2 seconds, allowing left spindle to continue working during unloading cycle. In addition to shop air, system receives power from lathe's own power supply and is programmed via lathe's CNC control. At proper moment, it creates vacuum inside spindle bore, gently extracting...

Read More »
Hardware Modules increase machine reliability.
Controls and Controllers

Hardware Modules increase machine reliability.

Plus 1(TM) hardware modules, based on TMS320F2810 and F2812 digital signal controllers, allow manufacturers of mobile equipment to design CAN based electronic control systems that provide closed-loop, real-time performance. Users can select from library of software objects and modular hardware to build system scaled to specific needs. Plus 1 suits equipment applications in fields such as material...

Read More »
Controls and Controllers

Control Panel monitors gas and fire hazards.

With 4 channels and 2 levels of alarm per channel, wall-mounted Gasmaster can monitor virtually any combination of flammable and toxic gas detectors, oxygen detectors, and fire detectors. Device displays all gas levels simultaneously on multilingual LED display, allowing full system status checks at a glance. Analog outputs and RS-485 digital communications allow unit to be connected to...

Read More »
Fire Protection System provides pre-wired/piped solution.
Controls and Controllers

Fire Protection System provides pre-wired/piped solution.

MCC (Mist Control Center) AquaMist Delivery System is pump skid assembly with pump, controller, control valves, deluge valve, control panel, and system strainer. System also incorporates AquaMist® fire protection system, which uses mist application nozzles that produce reduced droplet sizes in discharge pattern. In fire condition, fine mist is transformed to steam, expanding each water...

Read More »
Fittings suit agricultural water applications.
Couplings (Fittings)

Fittings suit agricultural water applications.

Offered in sizes up to 12 in., Agri-Lock fittings and couplings provide quick-disconnect capability for non-hazardous applications. Suited for agricultural suction and discharge of water, as well as for irrigation and dewatering applications, products are made of galvanized steel and feature ball-head design that allows for offset coupling. Pin-locking device is available to provide extra...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers