Trim Saw cuts copper and aluminum tubes.
Cutters and Cutting Machinery

Trim Saw cuts copper and aluminum tubes.

Model 315 produces repeatable, smooth, parallel cuts that are burr-free and require little or no surface cleaning. Heavy-duty base table and sub-assembly provide structural support, while hydraulically actuated tube clamp anchors various sized tubes that can be cut simultaneously. Hydraulic motor drives blade, and hydraulic cylinder with feed valve feeds blade through tubes. Lubrication and...

Read More »
Control System is offered with touch-screen LCD monitors.
Controls and Controllers

Control System is offered with touch-screen LCD monitors.

Suited for process control applications, I/A Series automation system is available with flat-screen LCD monitor options. This includes touch-screen option for Foxboro's 20 in. LCD monitor, which combines distortion- and flicker-free benefits of LCD technology with intuitiveness of touch screen operator interaction. System is suited for use in small, highly regulated batch plants to large power...

Read More »
Controls and Controllers

Control Systems offer reduced cabling requirements.

FlashCNC(TM) and FlashMotion(TM) embedded hardware platforms for WinMotion® and OpenCNC® products aid users who need to minimize cabinet space, reduce integration time, and simplify machine wiring. Open, scalable platforms offer Windows(TM) XP Embedded, choice of Flash memory or hard drive, 15 in. color LCD touch screen. Yaskawa Mechatrolink or Sercos digital drive interface, with...

Read More »
Cutters and Cutting Machinery

Laser Cutting Machines utilize pierce control system.

Laser cutting machine models TC L 3030 and TC L 4030 employ pierce control system (PCS), which continuously monitors and adjusts pierce parameters in real-time. Eliminating pierce dwell times required for process consistency, PCS system uses beam delivery hardware and machine control software and is effective on materials 1/8 in. thick and thicker. Soft pierce in 5/8-inch steel requires 1.5 sec...

Read More »
Servo-Pneumatic Control System has multiple feedback design.
Controls and Controllers

Servo-Pneumatic Control System has multiple feedback design.

Suited for use in open- or closed-loop applications, LS servo-pneumatic control system helps control position, pressure, force, flow, or velocity. It is compromised of dedicated device controller and 5-port, 3-position, closed-center directional valve. Convergent controller circuitry provides real-time command and feedback signal monitoring with less than 100 msec response time, while active...

Read More »
Hole Cutters deliver accurate cuts in structural steel.
Cutters and Cutting Machinery

Hole Cutters deliver accurate cuts in structural steel.

Designed to cut holes through engineering and structural steels, Simonds Hole Cutters are broaching cutters constructed of M2 steel. They deliver burr-free holes in single operation without having to drill pilot holes or perform step drilling. Products are available in long or short reach in sizes from 7/16-2 in. and metric sizes from 12-51 mm. Tungsten carbide models come in long and short reach...

Read More »
Pick-To-Light System facilitates order-picking process.
Pickers

Pick-To-Light System facilitates order-picking process.

Employing paperless, light-directed technology, EASYpick® directs pickers to pick location, minimizing time spent looking for products. Light units are combined with LED counters that tell pickers correct quantity to pick. System includes software management tools and reports for work distribution planning within graphical user interface. It integrates with mobile picking carts, storage and...

Read More »
Picker enables cycle times of 0.6 to 1.0 sec.
Robots

Picker enables cycle times of 0.6 to 1.0 sec.

High Speed Picker (HSP) employs one actuator for 2 motions and enables cycle speeds up to 120 cycles/sec. Suited for handling small work pieces with work piece loads below 100 g, unit offers independently adjustable end positions for horizontal and vertical stroke. It is available in 3 sizes with Y and Z stroke ranges of 52-68 and 15-25, 90-110 and 30-45, and 130-170 and 50-75. Compact design...

Read More »
Control Module brings smart features to small vehicles.
Controls and Controllers

Control Module brings smart features to small vehicles.

Model CL-410 has 8 total inputs, including one frequency or digital input for load control functions, and 7 analog or digital inputs. As single board controller, it offers load shedding and safety interlock features to prevent damage from activity. It delivers proportional control to machine's hydraulics, controls starter and fuel solenoids, and manages interface to ignition key. Model CL-410...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers