CAMM-1 GR Series Cutters come with L-shaped integrated machine.
Cutters and Cutting Machinery

CAMM-1 GR Series Cutters come with L-shaped integrated machine.

Available in GR-640, GR-540 and GR-420 models with 64-in., 54-in. and 42-in. cutting widths respectively, CAMM-1 GR Series Cutters deliver 1,485 mm/sec cutting speed and 600 gf down force. Featuring dual-position tool, units come with advanced media feeding system, electronically adjustable pinch roller and tangential emulation function. Offering up to 10x overlap cutting, unit’s cutting...

Read More »
10 in. Floor Scarifier Tackles Demanding Material Removal Applications
Scarifiers

10 in. Floor Scarifier Tackles Demanding Material Removal Applications

Tackle the most demanding surface preparation and material removal applications with CS Unitec's Trelawny™ Floor Scarifier. Powered by an 8 HP Honda GX240 gas motor, the TFP 260 Model 326.2000T removes coatings and corrosion from concrete and steel surfaces, removes painted lines, roughens concrete and creates a keyed or grooved profile for waterproofing and non-slip surface applications....

Read More »
Pack Mule Order Picker Cart can be hooked to any qualified tugger.
Pickers

Pack Mule Order Picker Cart can be hooked to any qualified tugger.

Eliminating need for forklifts moving sinlge pallets, Pack Mule Order Picker Cart uses forklift Tow Pin for moving multiple carts. Enclosed cargo space enables safety of operators. Available with one, two or three shelves, unit features swing-down shelves. Having 200% more cargo space than wooden pallet, product is more safer than wooden pallets or cages.

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Xuron® Model TK 3300 Tool Kit features Light-Touch™ return spring.
Tool Kits

Xuron® Model TK 3300 Tool Kit features Light-Touch™ return spring.

Housed in handy canvas travel pouch, Xuron® Model TK 3300 Radio Control Tool Kit includes Model 2175 Maxi-Shear™ flush cutter for soft wire and materials up to 12 AWG, Model 2193 hard wire cutter for hard wire up to 1 mm diameter and Model 501 adjustable wire stripper for accommodating wires from 10 to 26 AWG. Tools are made of carbon steel and feature cushioned rubber hand grips.

Read More »
Kett Scissor Shears Seal Edges of Materials; Reduces Rusting and Corrosion
Scissors

Kett Scissor Shears Seal Edges of Materials; Reduces Rusting and Corrosion

CINCINNATI, Ohio – (March 2, 2017) – Kett Tool Company helps plastic fabricators, siding installers and sign companies conserve materials with the swiping cut action of the KD-441 Scissor Shears. When cutting thin coated metals, the swiping cut action of the KD-441 seals the edges of the cut material, reducing the likelihood of rust or corrosion to provide a higher-quality, finished product....

Read More »
Touch Panel are Now Commonly Used in All Kinds of Applications, and a Variety of Cover Lenses have also Developed for its Practicability
Covers

Touch Panel are Now Commonly Used in All Kinds of Applications, and a Variety of Cover Lenses have also Developed for its Practicability

Following are two special cover lenses recently developed by Microtips Technology. 1. Mirror Treated Cover Glass Non-conductive reflection coating enables touch in accordance with mirror functions. While the reflection coating is partially transmissive, TFT display with high brightness LCM still presents a clear display image from behind and function as mirror when the display module is off. 2....

Read More »
EF-Series Micro Drills feature micro face point and flute geometry.
Drill Bits

EF-Series Micro Drills feature micro face point and flute geometry.

EF-Series Micro Drills are available from 0.75 mm up to 3.0 mm in diameter. Suitable for producing small deep holes in steel, cast iron, stainless steels and non-ferrous materials, units come with TiALN T99 multi-layer PVD coating for heat and wear resistance. Drills come with double margin design for providing stable and superior hole surface finishing.

Read More »
EcoTrim Workcell with Ultrasonic Cutting Technology Reduces Operating Costs and Improves Trim Quality
Cutters and Cutting Machinery

EcoTrim Workcell with Ultrasonic Cutting Technology Reduces Operating Costs and Improves Trim Quality

Dayton, OH (February 2017) - EcoTrim™ is an economical pre-engineered solution for high-speed ultrasonic cutting, trimming, deburring and chamfering applications. The workcell’s patented ultrasonic cutting technology replaces waterjet, laser cutting, hard tooling and manual trimming or routing methods. With its slim design and efficient operation, EcoTrim is a lean and sustainable alternative...

Read More »
Patented Nucleic Acid Extraction
Separators

Patented Nucleic Acid Extraction

Fullerton, CA – Isolate and purify RNA and DNA using the unique Innupure® C16 system from Analytik Jena. The patented and automated magnetic-particle separation system is available at the Laboratory-Equipment website. Technicians save time by using preprogrammed protocols that are optimized for various starting sample types. Pre-filled, plastic reagent kits contain all necessary chemicals so...

Read More »

All Topics