Adhesives

BASF Elastollan® TPU Adhesive Receives NSF Standard 61 Approval
Adhesives

BASF Elastollan® TPU Adhesive Receives NSF Standard 61 Approval

WYANDOTTE, MI, March 24, 2009 - BASF, the first thermoplastic polyurethanes (TPU) manufacturer to receive the NSF Standard 61 approval for its Elastollan® TPU for CIPP (cured-in-place pipe) applications used for trenchless infrastructure repairs, is also the first to receive the approval for Elastollan® ET 3685-11 TPU adhesive for CIPP. This new innovation will open the doors for...

Read More »
Pressure Sensitive Adhesive is moisture and blush resistant.
Coatings

Pressure Sensitive Adhesive is moisture and blush resistant.

Suited for applications that require moisture- and blush-resistance, Covinax® 462 permanent pressure sensitive adhesive withstands UV, weather, and outside exposure without yellowing or water damage. Clear, styrene-acrylic copolymer supports direct coating and transfer processes as well as temperatures to 150°C. Characteristics include 2.50 lb peel adhesion strength (180° peel...

Read More »
Silicone

Silicone Sealant/Adhesives suit glazing applications.

One-component Bondaflex® Silfast(TM) 501 is suited for window fabrication, production of curtainwall and skylights, and impact security glazing systems in shop or field. Offering fast assembly solution, 2-component Bondaflex® Silfast(TM) 502 combines structural glazing and weatherseal applications into one product. Both neutral-cure, non-sag products bond to most substrates without...

Read More »
Inks

Henkel Corporation, Curtis Packaging and Flint Group to Present Ink and Coating Options at Sustainable Packaging Coalition Spring Meeting

FEBRUARY 25, 2009 Bridgewater, NJ - Experts from Henkel Corporation, Curtis Packaging and Flint Group will present more sustainable ink and coating options at the Sustainable Packaging Coalition spring meeting in Chicago on March 24. "Adhesives, inks and coatings are less understood packaging materials than primary substrates, such as aluminum, fiber, glass and plastics," said Isabelle Valois,...

Read More »
Adhesive targets in-vitro diagnostic devices.
Adhesives

Adhesive targets in-vitro diagnostic devices.

ARcare® 92205 hydrophilic porous pressure-sensitive adhesive transmits fluids or gases while bonding filters and membranes within devices. Pores range from 200-500 microns in diameter and present 30%-50% porosity with finished film thickness of 2-8 mil. Offering stable pore structure of isolated channels in Z-axis direction, adhesive transfer film helps guide aqueous fluids evenly from...

Read More »
Nylok PRECOTE 85(TM) Meets GM Specs GM-6175M and GM-6194M
Adhesives

Nylok PRECOTE 85(TM) Meets GM Specs GM-6175M and GM-6194M

Macomb, Mich., January 5, 2009 - Nylok, the world leader in value-added fastener parts, announced that PRECOTE 85 has been approved at GM to meet GM-6175M and GM-6194M test specifications. With this approval we can now be specified for GM projects requiring more rigorous performance requirements in North America and around the world with GM specification GMW14657," said Nilo Urbani, General...

Read More »
Resins

Huntsman to Feature High-Performance Materials at Composites & Polycon 2009

Huntsman Advanced Materials will highlight its full range of resins, hardeners and formulated systems for fabricating composite parts used in aerospace, transportation, recreation and wind power applications at Composites & Polycon 2009, Booth #1721, Tampa, Florida, January 15 - 17, 2009. Among the primary product lines on display will be patented new nano-toughened epoxy systems for infusion...

Read More »
Infrared Heaters

Activating Adhesives on Decorative Trims - Using Infrared Heating in Car Manufacture

An infrared system from Heraeus Noblelight is helping R-Tek Ltd to achieve perfect adhesion of decorative trims on the inside of motor vehicle door panels. The plastic decorative trims are normally fixed to the panels on a production line by spraying the inside of the panel with an adhesive and then applying the trim. However, when R-Tek started to experience problems with the adhesion, it was...

Read More »
A Versatile Aerospace Epoxy Conquers Cryogenic Wind Tunnel
Epoxies

A Versatile Aerospace Epoxy Conquers Cryogenic Wind Tunnel

2/26/2009 A uniquely formulated epoxy adhesive has come to the rescue in an extraordinarily difficult cryogenic wind tunnel model bonding application. The state of the art wind tunnel poses a difficult challenge to engineering thermoplastics, not only in terms of the low temperatures and vacuum conditions, but in terms of thermal, thermal cycling and mechanical shear stresses. Cooled to...

Read More »
Potting Compound withstands temperature extremes.
Encapsulants

Potting Compound withstands temperature extremes.

With thermal conductivity of 25 BTU-in./hr-ft2-°F and volume resistivity of 1 x 1014 W cm, Type EP37-3FLFAN dielectric heat transfer adhesive works in temperature extremes, up to 250°F and down to 4K in cryogenic environments. Two-part thermal potting compound is formulated to cure at room temperatures and forms bonds that are resistant to shock, impact, thermal cycling, and chemicals.

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers