Epoxies

Flexible, Thixotropic, One Component Dual Cure Epoxy
Epoxies

Flexible, Thixotropic, One Component Dual Cure Epoxy

Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It cures readily within 20-30 seconds when exposed to a UV light source emitting a wavelength of 320-365 nm. The adhesive can also undergo a secondary heat curing for shadowed areas, typically curing in 60-90 minutes at 80-85°C. The system's adaptability to varying depths...

Read More »
Toughened, One Component Epoxy Features High Glass Transition Temperature
Epoxies

Toughened, One Component Epoxy Features High Glass Transition Temperature

Master Bond Supreme 17HTND-2 is a toughened epoxy system for bonding and sealing applications. It is a true one component system, not premixed and frozen, with an unlimited working life at room temperature. Supreme 17HTND-2 is thermally stable, featuring a high glass transition temperature (Tg) of 410°F (210°C). It also meets NASA low outgassing specifications per ASTM E595 testing. Supreme...

Read More »
Electrically Insulative Two Component Epoxy Features High Elongation
Epoxies

Electrically Insulative Two Component Epoxy Features High Elongation

Master Bond EP21LVFL combines good flexibility with a solid strength profile. It is curable at room temperature with a long working life of 120-160 minutes at 75°F for a 100-gram batch and features a flowable initial mixed viscosity of 10,000-14,000 cps. This epoxy generates low exotherm making it suitable not only for bonding and coating but also for sealing and potting applications. EP21LVFL...

Read More »
Thermally Conductive, Electrically Insulative Epoxy for Medical Device Applications
Epoxies

Thermally Conductive, Electrically Insulative Epoxy for Medical Device Applications

Master Bond EP40TCMed is a two-part, room-temperature curing epoxy system that meets the requirements of ISO 10993-5 for non-cytotoxicity. It is thermally conductive, electrically non-conductive and can be utilized as an adhesive or sealant in various medical and wearable device applications. This toughened epoxy delivers an elongation of 60-70%. It has good strength properties with a tensile lap...

Read More »
One Part, Toughened Epoxy for Dam-And-Fill Encapsulation
Epoxies

One Part, Toughened Epoxy for Dam-And-Fill Encapsulation

Master Bond Supreme 3DM-85 is a no-mix, non-solvent-based, one-component epoxy. This thixotropic paste material was formulated to serve as the damming compound in dam-and-fill encapsulation applications. It can also be utilized for bonding and sealing, especially where no flow is needed since the material cures in place and will not run or slump. The compound requires a relatively low heat cure...

Read More »
Thixotropic Epoxy Features Low Coefficient of Thermal Expansion
Epoxies

Thixotropic Epoxy Features Low Coefficient of Thermal Expansion

Master Bond EP5LTE-100 is a one part, non-premixed and frozen epoxy with a very low coefficient of thermal expansion (CTE), high glass transition temperature (Tg), and extremely high modulus. It has a thixotropic paste consistency making it ideal for bonding, sealing and gap filling applications. These properties are especially useful for opto-electronics or applications needing high dimensional...

Read More »
Die Attach Epoxy Featuring High Tg Meets NASA Low Outgassing Requirements
Epoxies

Die Attach Epoxy Featuring High Tg Meets NASA Low Outgassing Requirements

Master Bond EP17HTDA-2 is a one component epoxy that can be used for bonding, sealing and die attachment. It is not premixed and frozen, and cures with heat. This dimensionally stable system features excellent mechanical properties with both a high modulus and die shear strength. It transfers heat and resists thermo-mechanical stresses effectively. EP17HTDA-2 has exceptional temperature...

Read More »
Non-Cytotoxic Epoxy Withstands Multiple Methods of Medical Sterilization
Epoxies

Non-Cytotoxic Epoxy Withstands Multiple Methods of Medical Sterilization

Master Bond EP41S-5Med is a two part epoxy system that meets the requirements of ISO 10993-5 for non-cytotoxicity and can be used for bonding, sealing, and coating in medical devices. It features high temperature resistance and good strength properties. As an electrically insulative material, it can be utilized in medical electronic applications. This epoxy was tested against many sterilization...

Read More »
Electrically Isolating Epoxy Features Ultra High Heat Transfer Capability
Epoxies

Electrically Isolating Epoxy Features Ultra High Heat Transfer Capability

Master Bond EP5TC-80 is a one part, NASA low outgassing rated epoxy that achieves a thermal conductivity of 3.3-3.7 W/(m·K), while also retaining its electrical non-conductivity. It requires a cure at only 80°C for 1.5 to 2 hours. To optimize performance properties a post-cure of 1-2 hours at 80°C is recommended. Featuring a thixotropic paste consistency, this compound adheres well to a...

Read More »
Ultra-Low Viscosity, Biocompatible Epoxy Offers Optical Clarity
Epoxies

Ultra-Low Viscosity, Biocompatible Epoxy Offers Optical Clarity

Master Bond EP4CL-80Med is a one part, optically clear epoxy developed for use in medical device assembly applications. It withstands repeated sterilization cycles and passes ISO 10993-5 testing for non-cytotoxicity. This product cures at moderate temperatures of around 80-85°C within 60 to 90 minutes and faster at slightly higher temperatures. As a one part, non-premixed and frozen system, it...

Read More »

All Topics