Additives

UV-Curable PUDs provide optimized formulation latitude.

Free of solvents, surfactants, and tin catalysts, CN9500 and CN9501 are supplied at 40% solids content and are compatible with other water-based coatings. Both contribute optimal coating properties after water removal and UV curing, including good flow and leveling and low minimum film formation temperature. Non-yellowing and resistant toÂ- water, stains, and chemicals, CN9500 exhibits...

Read More »
UV/Vis Light-Curable Masking Resin reduces processing time.
Masks and Masking

UV/Vis Light-Curable Masking Resin reduces processing time.

Providing surface protection during aggressive chemical exposures and thermal processes, SpeedMask® 750-SC cures on demand and conserves labor efforts when used as alternative to manual taping or latex-based maskants. Purple uncured state enables placement confirmation, and transition to pink provides visual confirmation of full cure. Resin holds shape after application by either spray or...

Read More »
Two-Part Epoxy Paste has ultra low thermal resistance.
Epoxies

Two-Part Epoxy Paste has ultra low thermal resistance.

Master Bond EP48TC has thermal resistance of 5–7 x 10–6 K•m2/W, which enables thermal conductivity of 20–25 BTU•in/ft2•hr•Ã‚°F. Applied in bond lines as thin as 10–15 microns, epoxy paste has tensile lap shear strength from 900–1,100 psi and bonds to metals, composites, glass, ceramic, and plastics. Working life for 100 gram batch at 75°F is 90–120 min. Curing at...

Read More »
High-Heat and -Impact PLA for 3D Printing Yields Tight Tolerances and Less Shrinkage and Permits Oven-Drying of Filament
Filaments

High-Heat and -Impact PLA for 3D Printing Yields Tight Tolerances and Less Shrinkage and Permits Oven-Drying of Filament

Teknor Apex Highlighted New Terraloy® Bioplastic Compounds for 3D Printing at NPE2015 and Presented Technical Data at the Co-Located SPE ANTEC® Conference PAWTUCKET, RI, U.S.A.Â- – New compounds in the award-winning Terraloy® high-impact, high-heat polylactic acid (PLA) range of products provide enhanced properties and tight tolerance control in 3D printing, while...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Electrolube Introduce Conformal Coatings and Resins for Wearable Devices
Thermal Interface Materials

Electrolube Introduce Conformal Coatings and Resins for Wearable Devices

One of the challenges that wearable technology poses, is the very nature in which a device will be used, and primarily, the environments that it may be subjected to. For instance, a sensor in a wearable device has the added consideration of physical interactions; the device will be moved, worn, may see impact, may be flexed and potentially exposed to a number of additional elements, such as water...

Read More »
Hybrid Moldable Foam Resin offers heat resistance.
Foams

Hybrid Moldable Foam Resin offers heat resistance.

Consisting of styrenic and olefin components, Piocelan® T Foam Grade offers elevated temperature stability and is engineered to meet stringent flammability requirements for automotive interior parts. Foam parts designed and molded using Piocelan T, such as trunk spacers and insert cushions, offer advantages over parts made with existing hybrid foam materials, including weightÂ- and...

Read More »
Epoxy Potting Compound resists high temperatures.
Encapsulation Equipment

Epoxy Potting Compound resists high temperatures.

With 130°C relative temperature index rating, 50-3150RFR Black Epoxy with Catalyst 30 will survive elevated temperatures for long periods of time, which offers benefits as electronics get smaller and hotter. Compound is UL 746B listed and formulated to meet stringent non-burning requirements of UL 94 V-0. Typical applications include encapsulating power supplies, transformers, coils,...

Read More »
Epoxy Potting Compound suits applications to 365°F.
Miscellaneous Compounds

Epoxy Potting Compound suits applications to 365°F.

Offering thermal conductivity, electrical insulation, and low shrinkage after cure, Aremco-Bond™ 2315 is suited for potting and encapsulating densely packaged power supplies, rectifiers, ICs, oscillators, DACs, amplifiers, and relays. Black-pigmented product provides flexural strength of 12,300 psi and dielectric strength of 480 V/mil. Mixed in ratio of 100 parts resin to 25 parts hardener by...

Read More »
Needle-Bonding Adhesive facilitates cure confirmation, inspection.
Adhesives

Needle-Bonding Adhesive facilitates cure confirmation, inspection.

With viscosity of 150 cP, 1405-M-UR-SC is formulated with Encompass™ technology that incorporates See-Cure color change and Ultra-Red™ fluorescing technologies with LED-curing capabilities. Medical device adhesive is blue in uncured state to aid placement verification and fluoresces bright red under 365 nm black light after cure. Suitable for bonding stainless steel, PC, PMMA, and ABS,...

Read More »
SABIC Announces Global Application Development Focus to Advance Additive Manufacturing Technology
Additive Manufacturing Systems

SABIC Announces Global Application Development Focus to Advance Additive Manufacturing Technology

Orlando, Florida Leveraging its global technology centers in the Americas, Europe, Asia and Saudi Arabia, SABIC announced that it is expanding the company's application development focus in additive manufacturing technology.Â-  The move further underscores SABIC's commitment to this evolving technology that is pushing the industry to rapidly develop new materials and processes that...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics