Adhesives & Sealants

Adhesives & Sealants, Chemicals & Chemical Processing, Materials & Material Processing

Ultrapure Precision Silicone Film broadens application range.

Oct 07, 2013

Available as roll stock, ELASTOSIL® Film is made, in cleanroom conditions and without use of solvents, entirely from silicone elastomers and comes in thicknesses down to 20 microns. Intermediate backing allows film to be peeled off intact, and film thickness across entire width and length of film web deviates from specification by ±5% at most. Film is permeable to water vapor and certain... Read More

Adhesives & Sealants, Materials & Material Processing, Paints & Coatings

Extreme Coatings Uses Experience Coating Injection Molding Feed Screws to Extend the Life of Oil and Gas Drilling Equipment

Oct 07, 2013

St. Petersburg, FL – For the past 15 years, Extreme Coatings, Inc. has had tremendous success using thermal spray carbide coatings to significantly increase the life of the feed screws used in plastic injection molding and extrusion equipment. The same technology and expertise is now being used on downhole mud motor rotors for the oil and gas drilling industry. For Extreme Coatings, the move... Read More

Adhesives & Sealants, Materials & Material Processing

Non-Drip Epoxy can be used in indirect food applications.

Oct 03, 2013

With thick paste consistency, Master Bond® EP21NDFG bonds to diverse substrates – metals, composites, glass, ceramics, rubbers, plastics – and will not run or sag even when applied to vertical surfaces. Bonds resist thermal cycling as well as chemicals, including water, oils, fuels, acids, bases, and salts. This 2-component, room temperature cure epoxy has non-critical one to one... Read More

Adhesives & Sealants, Electrical Equipment & Systems, Green & Clean, Optics & Photonics

Heraeus to Offer New Metallization Pastes for N-type Solar Cells at EU PVSEC 2013

Oct 03, 2013

HANAU, Germany – The Heraeus Photovoltaics Business Unit will be exhibiting at this year's EU PVSEC, to be held in Paris from October 1-3 (EU PVSEC Conference: September 30 - October 4) and will showcase their new metallization pastes for n-type solar cells. Heraeus provides their customers with the complete family of pastes for the metallization of bifacial n-type solar cells. The new... Read More

Adhesives & Sealants

Conductive Adhesive bonds components to circuit boards.

Oct 01, 2013

Suited for solder replacement applications, CA-102 electrically conductive adhesive has moderate glass transition temperature (Tg) and modulus, exhibits optimized rheology for screen printing, and can be needle dispensed by time-pressure, auger, or positive displacement. Modified to provide conductivity stability during damp heat testing on tin, silver, and copper surfaces, product suits... Read More

Adhesives & Sealants, Packaging Products & Equipment

H.B. Fuller Sesame® High Modulus Tape Helps Protect Produce Yields

Sep 30, 2013

Tape improves corrugated box life while achieving cost-savings and sustainability goals LAS VEGAS – PACK EXPO, Booth C-4938 - In a packaging era where light weighting and flexible substrates are the name of the game, corrugated packaging designers are looking for solutions to a myriad of fruit and vegetable produce distribution challenges. Today's corrugated packaging designers must help... Read More

Adhesives & Sealants, Materials & Material Processing, Packaging Products & Equipment

Hot Melt Adhesive suits case and carton sealing. .

Sep 30, 2013

Specifically designed for optimized bonding on broad range of substrates including coated stocks and high recycled-content board, Advantra Encore™ 4000 polymer technology provides aggressive hot tack, grabbing and holding quickly to prevent pop-opens. From deep freeze to hot fill, product performs across broad service temperatures ranging from -40 to 160°F. Read More

Adhesives & Sealants, Electrical Equipment & Systems, Electronic Components & Devices, Green & Clean, Materials & Material Processing

Heraeus Photovoltaics Business Unit to Attend EU PVSEC 2013 in Paris

Sep 30, 2013

 Heraeus to showcase new metallization pastes for higher efficiency solar cells at a lower cost per Wp HANAU, Germany – The Heraeus Photovoltaics Business Unit will be attending the exhibition of EU PVSEC 2013 in Paris, Parc des Expositions Paris Nord Villepinte, hall 2, booth 2/C3, from October 1-3, 2013. Heraeus will be highlighting several of their newest products in their current... Read More

Adhesives & Sealants, Cleaning Products & Equipment, Paints & Coatings

Stuart Dean to Launch Its New ProFormance Series of Surface Solution Products at CONSTRUCT

Sep 26, 2013

- Show Taking Place September 25-27 in Nashville, TN Sponsored by Hanley Wood - NEW YORK – Stuart Dean, an international provider of renowned architectural restoration services, will highlight its new ProFormance Series of surface solution products at CONSTRUCT (September 25-27, 2013 at the Music City Center in Nashville, TN).  Sponsored by Hanley Wood, CONSTRUCT is the only national... Read More

Adhesives & Sealants, Food Processing & Preparation, Material Handling & Storage, Materials & Material Processing, Non-Industrial Products, Packaging Products & Equipment

Dow Features 100% PE Recyclable Stand Up Pouch at PACK EXPO Las Vegas 2013

Sep 26, 2013

®TM Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Dow Features 100% PE Recyclable Stand Up Pouch at PACK EXPO Las Vegas 2013 Award-winning design to be on display at the Dow sponsored The Showcase of Packaging Innovations® MIDLAND, Mich. – Dow is proud to once again serve as title sponsor of this year's The Showcase of Packaging Innovations® at PACK EXPO... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Pressure Sensitive Adhesives withstand harsh environments.

Sep 23, 2013

Suitable for demanding applications requiring resistance to harsh environments, PSA-5 and PSA-6 are specifically made for resistance to petroleum-based oils, organic solvents, and humidity. Both aggressive, tackified, acrylic adhesives demonstrate optimal adhesion to low-surface energy substrates such as polyolefins, while PSA-6 is particularly strong on most powder-coated substances. Read More

Adhesives & Sealants

Foam Tapes seal outdoor lighting and cabinets.

Sep 19, 2013

Combining lightness of foam with sealing ability of sponge rubber, Pres-On S-600 and S-800 seal and protect outdoor electronics cabinets, HVAC units, and HID lighting enclosures from rain, fine particles, and extreme climates. Both resist UV light, ozone, and corrosion, and are UL recognized for flame retardance and gasketing. Available in several thicknesses and lengths up to 60 ft, medium... Read More

Adhesives & Sealants, Thermal & Heating Equipment

St. Vincent Indianapolis Hospital Partners with Cargill Deicing Technology to Install Anti-icing Overlay to Prevent Slips and Falls

Sep 18, 2013

INDIANAPOLIS — St. Vincent Indianapolis Hospital has partnered with Cargill Deicing Technology to install a pavement surface overlay on one of its busiest driveways in an effort to reduce slips and falls from the slick conditions that can occur in the harsh winter months. The pavement selected is SafeLane® surface overlay, Cargill Deicing Technology's patented, epoxy-aggregate pavement... Read More

Adhesives & Sealants

Conductive Adhesive is intended for solar cell applications.

Sep 16, 2013

Intended for back contact applications in crystalline silicon solar modules, DB-1588-3 is stress absorbing to withstand thermal cycling effects and features conductive stability to back contact metallizations during damp heat exposure. Adhesive specifically makes contact from vias or other conductors on solar cells to back contact sheet and is designed to cure through encapsulant lamination and... Read More

Adhesives & Sealants, Paints & Coatings

Glass Sealant works in applications up to 1,500°F.

Sep 13, 2013

Applied by dipping, brushing, or spraying, Aremco-Seal™ 617 single-part, water-based, glass coating is used to produce hermetic seals in porous ceramics and refractories in electrical and high-vacuum applications. Cure is accomplished by drying 200°F for 30 min, 350°F for 60 min, and final curing at 1,650°F for 3–5 min. Odorless sealant cleans up prior to curing with warm water and... Read More

Adhesives & Sealants

LED Die Attach Adhesive exhibits high thermal conductivity.

Sep 12, 2013

Used for attaching LED and other small semiconductor die to silver and copper lead frames, CA-195 has dispense open time of >24 hr (measured as 25% increase in viscosity) while maintaining optimized rheology for pin transfer or needle dispensing. Electrically conductive solution features glass transition temperature (Tg) that facilitates wire bonding small die, low extractable ionics as... Read More

Adhesives & Sealants, Paints & Coatings

ESD Floor Finish enhances industrial environment safety.

Aug 28, 2013

Created for industrial areas and open area environments requiring static protection, EpoxyStyle ESD 2-part epoxy floor finish becomes dry to touch within 5–7 hr after application and is ready for traffic 10–12 hr after application. Chemical- and abrasion-resistant product complies with Ozone Transport Commission and California VOC regulations, may be installed over old VCT and concrete, and... Read More

Adhesives & Sealants, Material Handling & Storage, Portable Tools

Professional Glue Gun accelerates tackstrip, trim installation.

Aug 27, 2013

Designed for installation of tackstrip and metal carpet trim, HOTSHOT™ glue guns feature 250 W heaters for accelerated start-up and output of up to 5 1/2 lb of glue per hour (one stick per minute). Detachable stand, full-hand trigger, and Hi-Flow Tip are also standard. Additionally, 828T model includes adjustable thermostat for varying glue formulations and applications. HOTSHOT ½ in.... Read More

Adhesives & Sealants

Water Based Adhesive supports labeling applications.

Aug 27, 2013

Designed to clean easily with water, GF 779EZ Pressure Sensitive Adhesive is suitable for labeling untreated polyethylene or polypropylene as well as glass, cartons, PVC, PET, and polystyrene. When glue dries on back of label, bond remains pressure sensitive, enabling label to be removed from containers, except when labeling carton or paper products. Labels applied to glass are... Read More