Ceramic Adhesive bonds at high temperatures.
Adhesives

Ceramic Adhesive bonds at high temperatures.

Ceramabond(TM) 685N bonds ceramics and metals in temperatures up to 2500°F. Zirconium-silicate adhesive and sealant system contains no asbestos or volatile organic compounds. It bonds to ceramics, including zirconium oxide, zirconium silicate, and aluminum oxide, plus galvanized and plated metals, steel, and stainless steel. After curing, it has tensile shear strength of 500 psi, linear...

Read More »
Adhesives

Adhesive suits pressure-sensitive applications.

Designed in 4 x 4 in. blocks, for use with melt pots and large bulk systems, non-toxic Formula 298-404 hot-melt spray adhesive provides single-surface bonding within 30 seconds and tack times from 1 min. With output yield rated to 48 ftÂ-², formula can be applied to large substrates where temperature resistance is of concern. Viscosity at 350°F is rated at 2000 cps, and heat resistance...

Read More »
Tapes bonds metal before or after painting.
Adhesive Tapes

Tapes bonds metal before or after painting.

3M(TM) VHB(TM) tape families enable OEMs to join materials before or after powder-coating process. They provide seal, vibration damping, thermal expansion allowance, and bond differential substrates. Tapes can replace spot welds in metal assembly applications, prior to most paint systems, or replace rivets or screws by bonding to most powder coatings after painting process. Applications include...

Read More »
Adhesive contains additive for difficult substrates.
Adhesives

Adhesive contains additive for difficult substrates.

Polyurethane, reactive, hot-melt PUR-FECT LOK® 34-943A provides better green strength for springy substrates. It is formulated for vinyl laminating, panel bonding, and assembly bonding. Dye additive permits visibility under UV light source to indicate if optimum amount of adhesive is being applied. Moisture-curing, 100% solids adhesive can be applied by spray, roll coater, or slot coater...

Read More »
Epoxy System is approved for NASA outgassing specifications.
Epoxies

Epoxy System is approved for NASA outgassing specifications.

With 10:1 mix ratio by weight, EP30LTE-LO room temperature curing epoxy system has CTE of 12 x 10-6 in./in. per °C. Linear shrinkage is rated at 0.0002 in./in. per °C, thermal conductivity is 6 BTUoin./ftÂ-²ohro°F, and service temperature ranges from -60 to +250°F. Able to bond to various metals, plastics, ceramics, and glass, EP30LTE-LO passes ASTM 595 for low...

Read More »
Gap Filler Materials reduce stress on solder joints.
Adhesives

Gap Filler Materials reduce stress on solder joints.

Form-in-place, fully cured, thermally conductive THERM-A-GAP® T630 and T630G provide conformable thermal path between hot components and heat spreaders. Dispensable T630 and T630G viscoelastic pastes achieve 50% deflection at 1 psi. T630G material contains added filler of 0.010 in. dia glass beads. Both gap fillers provide thermal conductivity of 0.7 W/m-K and are capable of filling gaps...

Read More »
Resins

Acrylic Resin improves PVC substrate appearance.

Solarkote® PB, when blended with PVC and coextruded over PVC as capstock, upgrades PVC properties for exterior building products. It blends to share weathering performance in medium-dark colors where chalking can be a concern. It exhibits color hold in whites, and can be blended in PVC high-shear blending equipment. Applications include PVC siding, window profiles, fencing, and decking.

Read More »
Adhesive Tapes

Fabric provides electrical explosion protection.

HOT-STOP® blankets and tapes utilize continuous filament glass fiber with heat- and explosion-resistance to protect workers and equipment in confined spaces from hazards posed by energized circuits. Non-asbestos fiber has high temperature and abrasion resistance, produces no burning or gaseous emissions, and is not affected by water or stringent chemicals. Blankets are offered in 30 in....

Read More »

All Topics