Potting Compound cures quickly in thick applications.
Trigger Cure(TM) compound cures at room temperature to depths of 1 in. or more, and in areas under components where light does not reach. Two-part compound is applied with typical disposable-tip, static mix dispensers. Exposure to long-wave UV light cures product to depth of 1/4 inch in 20 seconds or less; remaining liquid resin gels in 7 to 20 minutes. Full cure is achieved in 24 hours at room...Read More »
Medical Adhesive Tape suits direct-skin applications.
Bioflex-® Rx733P consists of non-woven cloth coated with medical-grade, acrylic, pressure-sensitive adhesive that carries Device Master File Number with Bureau of Medical Devices. Conformable tape is suitable for TENS, ECG electrode, and bandage applications and removes cleanly without causing skin trauma. Stay-flat, easy-release liner facilitates die cutting.Read More »
Adhesive suits medical bonding applications.
Single-component Type 3381 UV-cure adhesive complies with ISO-10993 biocompatibility requirements. It forms flexible bond suitable for applications that must withstand thermal cycling and environmental exposure. Acrylated urethane adhesive bonds dissimilar rigid substrates, making it useful for potting and sealing glass-to-metal joints in medical assembly applications. Adhesive also bonds most...Read More »
Epoxy System provides moisture resistance.
With hardness rating of 84 and rated viscosity of 60,000 cps, DIEBOND 4460 resists temperatures to 110-Read More »
Adhesive Tapes for Personal Protective Equipment Applications
This ebook provides an in-depth overview into adhesive tapes for personal equipment applications.Read More »
Copper Tape suits heat sealing units in packaging equipment.
CHEMLAM-® uniform, pinhole-free, hardened film is dimensionally stable and resistant to tears, punctures, abrasion, and wear. With layer of PTFE film over PTFE impregnated fiberglass fabric, tape acts as replaceable non-stick surface and prevents flexible packaging films from melting onto heating element and impeding production. It operates effectively at temperatures from -100 to +500-Read More »
Coating/Potting Compound coats structural steel columns.
Ceramacast(TM) 589 2-part, silicon-dioxide based, silicate-bonded, chemically-setting ceramic compound is suitable for applications to 2400-Read More »
Cloth Tape suits automotive wire harness applications.
Scapa 250 heat-reflective, aluminum-backed cloth tape is single coated with high temperature silicone adhesive system to withstand extreme temperatures up to 500-°F. It meets Delphi specification ES-M-2283, is non-flammable, and offers high tensile strength. Tape may be torn by hand for easy application.Read More »
Structural Adhesives are solvent-free.
PERMABOND-® M1305 and M1315 are 2-part, 1:1 mixable, structural acrylics that bond plastics and metals in any combination with flexibility, toughness, and surface adhesion. They offer resistance to peel, fatigue, and impact loads, and will adhere to most structural thermoplastics, thermoset plastics, FRP, stone, ceramics, steel, and aluminum. M1305 and M1315 can join dissimilar materials,...Read More »
Hot-Melt Adhesive dries clear.
VERSA-MELT-® L 34-656A secures wrap-around paper and plastic labels to glass, PVC, and PET bottles of cold water or other non-carbonated, transparent liquids, allowing consumers to see through label and into container. Adhesive may be used with roll-fed and cut-and-stack labelers and is suitable for pick-up and overlap operations. It meets composition requirements of Indirect Food Additives,...Read More »
Hot-Melt Adhesive is suited for cold-water bottles.
CONTOUR-® 34-493A affixes wrap-around labels to food and beverage bottles, provides long open time and tackiness, and dries clear. It holds paper and plastic labels to bottles made of glass, PVC, and PET and is appropriate for roll-fed and cut-and-stack labeling. Operators can run entire speed range from jog speed up to 800 containers/min. Product meets composition requirements of Indirect Food...Read More »
Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.Read More »