New Adhesives & Sealants Products

Epoxy Adhesive is suitable for use in high temperatures.

Two component, high temperature resistant epoxy adhesive, EP35, cures at room temperature. Bonds are maintained after long exposures to temperatures of 450-500-

Dispensing System suits 2-component adhesives.

MIXPAC S-50 system for 2-component adhesive dispensing works with manually operated dispensers, as well as with battery-powered EZ-mix-®HI hand-held dispensing unit. When used together, users obtain higher flow rate and dispense thicker materials safely. System accommodates volumetric ratios of 1:1, 2:1, 4:1, 10:1, and 3:2.

Potting Compound cures at room temperature.

Type LX20111 2-part epoxy develops strong bonds to variety of substrates and can achieve lap shears of 2,900 psi. When cured, substance resists many organic and inorganic compounds and is thermally and electrically insulating. LX20111 reaches glass transition temperature of 64-

Adhesive Tapes offer solvent-based systems.

Custom engineered specialty adhesive tapes can be manufactured by applying solvent-based adhesive systems to various rigid and extensible films and laminates such as aluminum foil, LLDPE, LDPE or MDPE, PVC, polyester, and polyurethane. Tapes are acrylic-, polyurethane-, rubber-, and silicone-based and can be applied to foils and films up to 60 in. wide. Release liners can be matched to...

How to Choose the Right Label for Your Application

This ebook discusses factors to consider when choosing the optimal label for your application.

Ceramic-Silicone Sealant handles temperatures to 2,000

Non-flammable, environmentally safe, single-part, water-dispersed Aremco-Seal(TM) 4030 seals porous ceramics and refractories. Formulated with viscosity of 600-1,200 cps, product is applied by brush, roller, or spray equipment, drying at room temperature in less than 1 hr with full cure in 30-60 min @ 450-

Potting Compound cures quickly in thick applications.

Trigger Cure(TM) compound cures at room temperature to depths of 1 in. or more, and in areas under components where light does not reach. Two-part compound is applied with typical disposable-tip, static mix dispensers. Exposure to long-wave UV light cures product to depth of 1/4 inch in 20 seconds or less; remaining liquid resin gels in 7 to 20 minutes. Full cure is achieved in 24 hours at room...

Medical Adhesive Tape suits direct-skin applications.

Bioflex-® Rx733P consists of non-woven cloth coated with medical-grade, acrylic, pressure-sensitive adhesive that carries Device Master File Number with Bureau of Medical Devices. Conformable tape is suitable for TENS, ECG electrode, and bandage applications and removes cleanly without causing skin trauma. Stay-flat, easy-release liner facilitates die cutting.

Adhesive suits medical bonding applications.

Single-component Type 3381 UV-cure adhesive complies with ISO-10993 biocompatibility requirements. It forms flexible bond suitable for applications that must withstand thermal cycling and environmental exposure. Acrylated urethane adhesive bonds dissimilar rigid substrates, making it useful for potting and sealing glass-to-metal joints in medical assembly applications. Adhesive also bonds most...

Epoxy System provides moisture resistance.

With hardness rating of 84 and rated viscosity of 60,000 cps, DIEBOND 4460 resists temperatures to 110-

Copper Tape suits heat sealing units in packaging equipment.

CHEMLAM-® uniform, pinhole-free, hardened film is dimensionally stable and resistant to tears, punctures, abrasion, and wear. With layer of PTFE film over PTFE impregnated fiberglass fabric, tape acts as replaceable non-stick surface and prevents flexible packaging films from melting onto heating element and impeding production. It operates effectively at temperatures from -100 to +500-

Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance

Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.