Epoxies

Adhesive resists temperatures to 400°F.

Room temperature curing EP21HT, 2-component epoxy adhesive, has 1:1 mix ratio, weight or volume. It is 100% reactive and contains no solvents or volatiles. With service operating temperature range of -60 to +400°F, product bonds to similar and dissimilar substrates including metals, glass, ceramics, wood, rubbers, and plastics. Characteristics include volume resistivity of >1014 ohm-cm,...

Read More »
Conductive Adhesive is offered in syringe system.
Adhesives

Conductive Adhesive is offered in syringe system.

Able to cure at room temperature in 24 hr, CHO-BOND® 584-29 conductive adhesive is contained within syringe system that consists of a pair of syringes, 1 containing hardener and 1 with conductive resin, separated by connector. Compounds are mixed between syringes, and 1 syringe is used to apply mixed conductive adhesive. With silver filler, compound provides low-volume resistivity of 0.002...

Read More »
Adhesives

Dielectric Adhesive suits stacked die applications.

Formulated with high thermal conductivity (0.8 W/mK) filler and collapsible spacers, QMI 9503 is hydrophobic and stable at temperatures to 260°C. Non-abrasive on polyimide passivation, product produces void-free bond lines that adhere to organic and metal surfaces. Resistant to delamination and popcorning, adhesive can be cured in-line using Skip-Cure processing in 10 sec after bond line...

Read More »
Resins

Clear Resin offers more impact strength than polycarbonate.

LEXAN® EXL transparent polymer builds on mechanical properties of standard polycarbonate by incorporating silicone into its molecular structure. Copolymerization produces impact resistance and UV weatherability, while cold-temperature ductility to -40°C allows product to withstand prolonged outdoor exposure. Resin is also available as opaque material.

Read More »
Epoxies

Epoxy Adhesives require no fixturing.

Available as in three formulations, adhesives withstand service temperatures of -40 to +200°F. General-purpose adhesive/encapsulant, 5 Minute® Epoxy, has mixed viscosity of 10,000 cps. With mixed viscosity of 150,000 cps, 5 Minute® Epoxy Gel is thixotropic, non-sagging gel with gap-filling properties. Thixotropic, non-sagging gel, One Minute(TM) Epoxy Gel, has 30,000 cps mixed...

Read More »
Adhesives

Surface Mount Adhesive suits high-speed applications.

Without requiring higher than normal print temperatures or higher nozzle temperature control, Chipbonder® 3627 may be dispensed at rates of 40,000+ DPH and is fully jettable. Controlled rheology provides high-speed printing for use with fine pitch components. Stable at room temperatures, fully cured adhesive provides adhesion to various substrates and has glass transition temperature (Tg)...

Read More »
Repair and Patching Compound is offered in caulking tubes.
Repair Compounds

Repair and Patching Compound is offered in caulking tubes.

Single-component, aluminum-loaded Lab-metal hardens by exposure to air into sandable, grindable, tappable metal. Dent filler withstands temperatures to 350°F or one-time exposures to 425°F. Ready-to-use metal putty is also available as Hi-Temp Lab-metal, which withstands temperatures to 1000°F. Packaged in 20 oz caulking tubes, product seals seams and other specialized applications.

Read More »
Automotive Adhesive Transfer Film works with automatic tape gun.
Adhesive Tapes

Automotive Adhesive Transfer Film works with automatic tape gun.

Unifilm® U658A reverse-wound, acrylic transfer film forms durable bonds to aluminum, steel, polyurethane foams, polystyrene, polycarbonate, and ABS plastics. It provides temperature, humidity, and water soak resistance. Film is suitable for applying nameplates and decorative parts, bonding interior trim and instrument panel components, and assembling leather covered seats and steering...

Read More »
Adhesive offers high thermal conductivity.
Epoxies

Adhesive offers high thermal conductivity.

Two-component, room temperature curing EP21ANHT features thermal conductivity of over 22BTU/in/ftÂ-²/hr/°F. It comes in paste form and offers high bond strength to wide variety of substrates. Bonds resist water, oil, fuels, and many solvents. Shore D hardness is >85 and volume resistivity is >1013 ohm-cm. Cures can be accelerated by use of heat. EP21ANHT is recommended for high...

Read More »
Adhesive bonds plastic-to-plastic assemblies.
Adhesives

Adhesive bonds plastic-to-plastic assemblies.

LITE-LOK 495, suited for structural bonding of plastics and sealing of plastic assemblies, offers chemical resistance to detergent, carpet, and floor cleaning solutions. Material is 100% solids, with no solvents or by-products upon curing. With viscosity of 35,000 cP, clear, light-yellow liquid cures under UV-A light and may be applied using pressure pot or piston pump dispensing system. Cured...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics