New Adhesives & Sealants Products

Polyurethane Adhesive suits aerospace/military applications.

NASA outgassing approved Tra-Bond 240-2 offers various cure schedules, including one at room temperature. Flexible polyurethane is suited for aerospace and military applications where substrates consist of polyurethane or other hard-to-bond-to materials. With work life of 2 hr at room temperature, product has a shelf life of 6 months when stored at -40-

Electronics Adhesive withstands temperatures to 1,000

Filled with nickel-flake particles, Pyro-Duct(TM) 598 is silicate bonded and electrically conductive. It provides volume resistivity of .005 ohm-cm and thermal conductivity of 17.9 Btu-in/hr-ft-²--

Epoxy Adhesive suits bicycle building applications.

Gap filling, sag resistant Araldite 2015 epoxy securely joins dissimilar materials used in fabricating bike accessories. It attains handling strength after 4 hours at room temperature and produces joints with lap shear strength of 3,200 psi at room temperature. Epoxy dispenses, waste-free, from 50 ml, dual barrel cartridges and handles temperatures from -67 to 250-

Adhesive/Sealent has temperature range of -300 to +300

Master Bond Polymer System Supreme 10HTFL one component, flexible, epoxy resin based adhesive/sealant cures to flexible thermoset polymer at temperatures of 250-300-

Medical Sealing Solutions: Protecting Devices & Equipment from Contamination

This white paper provides an in depth look into medical sealing solutions for protecting devices & equipment from contamination.

Hot-Melt Butyl Sealant is suited for edge sealing IG units.

Suited for hand gunning applications, Edge Therm(TM) THM 3000 consists of one-component, 100% solids sealant system designed for edge sealing insulating glass (IG) units. Product does not require mixing, produces minimal waste, and adheres to glass and metal substrates. Available in black and gray, product meets/exceeds requirements of ASTM E773/774 and CAN/CGSB-12.8. Product is available in 5...

Adhesive Film suits direct skin application.

Bioflex-® Rx914P breathable, co-polyester film is single coated with medical grade acrylic, pressure-sensitive adhesive. Adhesive carries Device Master File Number with Bureau of Medical Devices and is supplied with 60 lb. kraft release liner. It adheres well to skin, yet removes cleanly without causing skin trauma, making it suitable for wound care, ostomy care, IV dressing, and medical device...

Materials are offered in varying densities for design work.

Medium Density Epoxy SRP boards, used for creating design models, have 42 lb/ft-³ density and 68 Shore D hardness. Resistant to organic solvents, they offer heat resistance greater than 284-ºF. Used for creating styling models or negative molds for casting, Ultra Low Density Urethane SRP boards have 15 lb/ft-³ density and 27 Shore D hardness. Suited for milling foundry patterns and core boxes,...

Water-Based Epoxy suits industrial/marine applications.

Fast Clad(TM) DTM, single-coat, direct-to-metal epoxy finish, provides high film build in one coat of 4-6 mils dry film thickness. Product dries to tough gloss finish, providing corrosion and chemical resistance as well as weathering protection. Applied at 77-ºF, it dries to touch in 45 min and is dry to handle in 4 hr. Low-odor coating meets VOC and HAPS requirements, cleans up with water, and...

Wire Harness Tapes meet automotive requirements.

Polyken-® pressure-sensitive tapes are available as various engine compartment tapes including heat shielding aluminum foil/fiberglass fabric composites, and flame-retardant polymeric and fabric composite tapes. Tapes resist chemicals, provide up to 60 oz/in. adhesion, and operate at up to 230-

Multi-Function Sealant helps save energy and lives.

JACO Fire and Draft Sealer(TM) is Classified by UL in accordance with ASTM-E136 for meeting non-combustible building material requirements. Product also acts as acoustical sealant, minimizing room to room and exterior noise. Zero Flame Spread/Zero Smoke Developed credited product guns from quart and 10.5 fl oz tubes. Water-based product can be tooled before curing and cleans up with water. After...

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.