Case Sealer reaches speeds of 40 cases per minute.

Case Sealer reaches speeds of 40 cases per minute.

Automatic CS 440 incorporates bottom belt drive and rotary tucker design and can accomplish tool-less size changeovers in less than 6 min. Offerings include interlocked safety guarding, Nordson hot-melt glue system, Allen Bradley Micrologix PLC, automatic case index gate, and NEMA 12 electrical controls. Unit accommodates cases from 8-28 in. long, 5-17 in. wide, and 5-18 in. high and may be...

Read More »

Pressure-Sensitive Tape provides EMI shielding.

Supported by polyester release liner, ARclad-® 90038 2.4-mil tape features electrically-conductive, acrylic-based, pressure-sensitive adhesive and 1 oz tin-plated, copper-foil backing that can be soldered and is resistant to corrosion and oxidation. Shielding effectiveness is from 95-80 dB in 1-18 GHz frequency range, making it suitable for cell phones, computers and peripherals, ground...

Read More »
Epoxy Adhesive offers high flexibility.

Epoxy Adhesive offers high flexibility.

Type EP51FL 2-component, epoxy resin features 1:1 mixing ratio and cures rapidly at room temperature with setup time of 30-40 min. Epoxy is 100% reactive and no solvents or volatiles are emitted during cure. It can withstand thermal and mechanical shocks. Cured compound exhibits peel strength of more than 25 pli, elongation of >125%, and tensile strength of 1,150 psi. Mixed viscosity is...

Read More »

Flexible Adhesive suits assemblies subject to stress.

With tensile elongation of 130-140%, Flex Welder(TM) structural methacrylate adhesive fills gaps up to 3/8 in. and bonds plastics, composites, and metals in applications involving flexing, shock, or vibration. Room-temperature-cure adhesive provides load-bearing bonds that withstand impact, weathering, humidity, and temperature variations up to 250-

Read More »
Compound prevents weeping on crimp seals of filters.

Compound prevents weeping on crimp seals of filters.

Permabond-® HH040 one-part, high-viscosity, anaerobic retaining compound cures only when in contact with metal parts and oxygen is excluded. Compound fills air space between parts and unitizes and retains male and female parts. Green compound cures at room temperature to crosslinked thermoset plastic. Cure can be accelerated by heat. It has viscosity of 5000 cP and shelf life of 12 months when...

Read More »
Rubber-Based Adhesive is suited for automotive assembly.

Rubber-Based Adhesive is suited for automotive assembly.

With 12-point liner and polyester carrier, MACbond-® IB-1185 performs general-purpose bonding applications, providing dimensional stability and die-cutting properties suited for automotive manufacturing. Product offers high-tack properties suited for bonding applications such as gasketing, sound dampening, and dust sealing.

Read More »

Activated Epoxy bonds dissimilar materials.

Bond-It(TM) 7050 Activated Epoxy forms high-strength bonds to Nylon, PVC, most metals, high performance composites, glass, ceramics, and combinations of dissimilar materials. In most cases, no special surface preparations are required. Cured at room temperature for 400-

Read More »
Epoxy encapsulates microelectronic chips.

Epoxy encapsulates microelectronic chips.

TRA-BOND 933-2 one component, electrically insulating epoxy encapsulant is for encapsulating microelectronic chips. Epoxy provides environmental and mechanical protection, exhibits longer work life and lower moisture sensitivity than anhydride-cured systems. Low coefficient of thernmal expansion minimizes stress effects on components and wiring during thermal shock tests.

Read More »

Sealing Media complies with food packaging regulations.

Appeel-® sealing media, optimised for multi-layer film lids for rigid food packaging, seal to APET. Lids made of above material peel off from container rims in one piece and offer puncture- and radiation-resistance. OPET and OPP films permit use of metal detectors to track food contaminants. All Appeel media offer low coefficient of friction, which improves machine running properties when...

Read More »

PPS and LCP Resins suit medical technology applications.

Fortron-® MT linear polyphenylene sulfide grades can withstand repeated sterilization and resist hydrolysis and strong disinfectants, alkalis, and other chemical media. They are used to replace metal and for precision mechanical elements in drug delivery systems. Vectra-® MT liquid crystal polymer grades offer stiffness, creep resistance, dimensional stability, and high flow in long, thin...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics