Urethane Patch Kit quickly repairs concrete.
Sealants

Urethane Patch Kit quickly repairs concrete.

ARMORSEAL® ExpressPatch fast-dry, low-odor, water-based system requires only one coat. It protects concrete from thermal shock, impact, corrosion, chemical attack, and abrasion while providing return to service in 4 hr. ARMORSEAL offers no outgassing at high film thickness. It may be applied directly to damp concrete using flat trowel at minimum thickness of 3/16 to 1/4 in. Kit is suitable...

Read More »
Adhesives

Metal Adhesive requires no primers.

Metal Welder II 2-part, 10:1 methacrylate adhesive bonds metal to other metals or to dissimilar substrates. Mixed and dispensed from manual or pneumatic dispensers with static mixing nozzles, it attains functional cure in 2-4 hours at room temperature. Load-bearing bonds withstand service temperatures from -40 to 250°F and resist glycols, motor oil, mineral spirits, and gasoline....

Read More »
Hot-Melt Adhesive System has large-volume reservoir.
Adhesives

Hot-Melt Adhesive System has large-volume reservoir.

Upright, free-standing 3910 Series Thermopulse Hot Melt Unit includes 10 gal (80 lb) melt-on-demand reservoir and positive-displacement, dc-motor-driven gear pump. Suited for use with up to 4 automatic or handgun Electromatic Applicator Heads and hoses, unit holds constant pressure to within ±5%. System includes plug-in connections and MICROTEMP microprocessor-based temperature control with...

Read More »
Polyurethane Adhesive suits aerospace/military applications.
Adhesives

Polyurethane Adhesive suits aerospace/military applications.

NASA outgassing approved Tra-Bond 240-2 offers various cure schedules, including one at room temperature. Flexible polyurethane is suited for aerospace and military applications where substrates consist of polyurethane or other hard-to-bond-to materials. With work life of 2 hr at room temperature, product has a shelf life of 6 months when stored at -40°C.

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Electronics Adhesive withstands temperatures to 1,000°F.
Adhesives

Electronics Adhesive withstands temperatures to 1,000°F.

Filled with nickel-flake particles, Pyro-Duct(TM) 598 is silicate bonded and electrically conductive. It provides volume resistivity of .005 ohm-cm and thermal conductivity of 17.9 Btu-in/hr-ftÂ-²-°F. Available in 2 grades for adhesive and coating applications, product contains no VOCs and cleans up with warm water and soap in uncured state. Curing is accomplished by heating at...

Read More »
Epoxy Adhesive suits bicycle building applications.
Epoxies

Epoxy Adhesive suits bicycle building applications.

Gap filling, sag resistant Araldite 2015 epoxy securely joins dissimilar materials used in fabricating bike accessories. It attains handling strength after 4 hours at room temperature and produces joints with lap shear strength of 3,200 psi at room temperature. Epoxy dispenses, waste-free, from 50 ml, dual barrel cartridges and handles temperatures from -67 to 250°F. Adhesive produces...

Read More »
Adhesive/Sealent has temperature range of -300 to +300°F.
Epoxies

Adhesive/Sealent has temperature range of -300 to +300°F.

Master Bond Polymer System Supreme 10HTFL one component, flexible, epoxy resin based adhesive/sealant cures to flexible thermoset polymer at temperatures of 250-300°F and above and does not require refrigeration for extended storage before use. It adheres to metallic and non-metallic substrates and exhibits tensile lap shear strengths of more than 2,000 psi and T-peels in excess of 60 pli....

Read More »
Sealants

Hot-Melt Butyl Sealant is suited for edge sealing IG units.

Suited for hand gunning applications, Edge Therm(TM) THM 3000 consists of one-component, 100% solids sealant system designed for edge sealing insulating glass (IG) units. Product does not require mixing, produces minimal waste, and adheres to glass and metal substrates. Available in black and gray, product meets/exceeds requirements of ASTM E773/774 and CAN/CGSB-12.8. Product is available in 5...

Read More »
Adhesives

Adhesive Film suits direct skin application.

Bioflex® Rx914P breathable, co-polyester film is single coated with medical grade acrylic, pressure-sensitive adhesive. Adhesive carries Device Master File Number with Bureau of Medical Devices and is supplied with 60 lb. kraft release liner. It adheres well to skin, yet removes cleanly without causing skin trauma, making it suitable for wound care, ostomy care, IV dressing, and medical...

Read More »
Epoxies

Materials are offered in varying densities for design work.

Medium Density Epoxy SRP boards, used for creating design models, have 42 lb/ftÂ-³ density and 68 Shore D hardness. Resistant to organic solvents, they offer heat resistance greater than 284ºF. Used for creating styling models or negative molds for casting, Ultra Low Density Urethane SRP boards have 15 lb/ft³ density and 27 Shore D hardness. Suited for milling foundry...

Read More »

All Topics