New Adhesives & Sealants Products

Methacrylate Adhesives are surface activated.

Agomet(TM) adhesives consist of 6 adhesives and 4 hardeners that bond substrates via surface activation. This allows application of hardener/lacquer to substrate up to 30 days before resin is added to bond assembly. Able to join materials, thermoplastics, and composites, adhesives can be hand- and meter-mixed. Work lives range from 1-20 min, lap shear strengths vary from 3,000-4,000 psi, and...

Adhesive bonds non-active package surfaces.

Hysol-® QMI 550SI low-CTE, silica-filled, dielectric die attach adhesive is hydrophobic and produces void-free bond lines that adhere to organic and metal surfaces. Product allows SkipPrebake(TM) and can be cured in-line using SkipCure(TM) processing 10 sec after bond line reaches 150-

Vertical Cartoner offers speeds up to 200 cartons/min.

Semi-automatic Victory 100 features stainless steel frame with single chain carton track, and 40 in. of carton loading space on each side of system. Standard carton closing is straight or reverse tuck. System includes set of sized carton pockets on 10 in. centers, 48 in. powered magazine with rotary placer, flat-belt discharge conveyor with lay-down tooling, electrically interlocked guarding, and...

Epoxy Adhesive suits high-temperature applications.

Heat-resistant, one-part, solvent-free TRA-BOND 77-1S has glass-transition temperature of 200-

6 Engineering & High-Performance Plastics Used for Machined Components

This resource breaks down six of the most commonly used high-performance plastics, properties and common applications, and questions to ask during material selection.

Epoxy Adhesive suits variety of applications.

Tra-Bond 970-1N1 sag resistant epoxy adhesive develops aluminum-to-aluminum lab shear strength of 3,000 psi, can reach glass transition temperature of 83-

Epoxy has 10 minute working time.

Self-leveling, 100% solids 10 Minute(TM) Epoxy adhesive is formulated for bonding, potting, and cosmetic repairs in various OEM applications. Able to adhere to varied substrates, it is available in clear and black and has fixture time of 20 min. Functional cure is attained in 90 min. Cured product has 2,400 psi tensile shear strength, 20-25 pli peel strength, and 10 lb-ft/in-² impact resistance....

Structural Acrylic Adhesive is non-sagging.

SPEEDBONDER(TM) H8000 delivers impact- and peel-resistant bonds on various surfaces including metals and composites. Product consists of 100% reactive, 2-component gel that cures at room temperature and bonds to materials with little or no surface preparation. Capable of filling gaps as large as 0.5 in., adhesive also offers environmental resistance. Product is packaged in 490 ml EPS cartridges,...

Adhesive and Coating withstands temperatures to 2,400

Ceramacoat(TM) 512N high-temperature adhesive and ceramic coating system is used in assembly of ceramic, metal, and plastic electrical components and as coating of high temperature structures requiring corrosion protection. Single part, water-based, silica-filled system offers volume resistivity of 109 ohm-cm and dielectric strength of 250 V/mil at room temperature. Odorless product contains no...

Platemounting Tapes suit flexographic printing industry.

SteelMaster LT adhesive holds photopolymer plates .067 in. and thinner onto steel cylinders. Able to hold during print run, it removes with ease upon job completion. Non-building adhesive maintains initial level of holding power over time. Suited for combination printing, medium-density 52121 Softprint SteelMaster foam tape is coated with SteelMaster LT and allows for fine dot reproduction of...

PBT Resins meet UL94-V0 specs in thin-walled components.

Flame-retardant Celanex-® 14 Series polybutylene terephthalate resins are non-blooming, so molded parts are essentially free of surface deposits. Celanex 3314, 3214, and 3114 are 30, 15, and 7.5% glass fiber-reinforced, respectively. Celanex 2014 is unfilled, and Celanex 4014 is unfilled and toughened. Resins are suited for connectors, housings, relays, switches, motor end caps, and other...

TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series

For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.