New Adhesives & Sealants Products

Sealants are suited for window and door industries.

PURFECT GLAZE(TM) warm applied adhesive glazing sealants bond glass to window sashes or frames. Sealant technology utilizes polyurethane reactive hot-melt adhesives and allows users to wrap windows within 5 min. Once glass is bedded, products provide immediate handling strength. Sealants are available in 3 grades: PURFECT GLAZE G for general insulating glass (IG) applications, SA for special IG...

One-Component Sealant offers no slump, non-sag properties.

Bostik-® 2175 FS environmentally-sound, 100% solids sealant meets demands of transportation industry. Based on silyl polyurethane sealant hybrid polymer technology, sealant is suited for overhead and vertical seam-sealing and gap-filling applications. Non-yellowing, paint-compatible formula adheres to aluminum, wood, and FRP. It is free of xylene, acetone, MEK, and similar solvents. At 70-

Adhesive System provides thermal conductivity.

Silicone-based TRA-CAST 813J01 bonds well to difficult substrates, exhibits low stress, and can cure at room temperatures. Soft and flexible material has medium viscosity prior to cure. Once hardened, adhesive can handle temperatures up to 260-

Thermally Conductive Adhesive features 1:1 mix ratio.

Two-component, electrically-isolating, EP21AO epoxy adhesive will adhere to similar and dissimilar substrates. Self-leveling paste is 100% reactive and does not contain solvents or volatiles. It has thermal conductivity of 10 BTU/in./ft-²/hr/-

Third Party Logistics and Fulfillment

This whitepaper provides an overview of third party logistics (3PL) and fulfillment services.

Adhesive bonds thermocouples for high temperature uses.

Pyro-Putty-® 2400 thermally conductive adhesive, sealant, and metal repair compound is suited for applications up to 2,000-°F. Ceramic and stainless steel-filled paste bonds, seals, and repairs defects up to 3/8 in. cross-section in cast iron, steel, and stainless steel components. Single-part, thermally shock-resistant product is water-based and contains no VOCs. It sets at room temperature...

Joining System joins PVDF acid waste pipe and fittings.

Electrofusion joining system joins polyvinylidene fluoride acid waste pipe and fittings from 1-½-6 in. using Rionfuse electrofusion processor built into shock-resistant, splash-proof case. System utilizes fusion coil made from heavy-duty stainless steel coil wire which can be rotated 360-° in socket to aid in installation. Able to be interfaced with PC, product ensures leak-free joints and has...

Pressure Sensitive Adhesive meets medical device guidelines.

Intended for medical devices where skin contact is possible, TM9616 consists of 1/16 in. white polyethylene foam, double-coated with acrylic-based, hypoallergenic, medical-grade adhesive. Adhesive is protected by semi-bleached kraft release liner with silicone release system on 2 sides. Product is formulated for sustained contact with human skin. Applications include ostomy mounts,...

Rubber-Toughened Adhesives are suited for OEM assembly.

ZipGrip-® adhesives consist of clear-drying cyanoacrylates that bond plastics, rubber, and metal; provide flexibility and impact resistance; and withstand service temperatures to 280-

Printer Tapes are designed for low-light signage.

Used with GlobalMark(TM), PowerMark(TM), HandiMark-®, and Labelizer-® Plus products, reflective tapes are visible with flashlight or vehicle headlights and suited for low light conditions. Phosphorescent, Glow-In-The-Dark tapes glow for 10 hours and meet ISO, dIN and ASTM standards. Chemically-resistant tag stock meets OSHA 50 lb pull requirement and is suited for lockout and accident...

Double-Sided Tapes suit touch screen assembly applications.

ARclean-® 90178 and 90176 are 0.0035 and 0.005 in. thick non-corrosive tapes that provide perimeter spacer bonding in resistive touch screen and other similar electronic devices. They utilize electronically-clean, acrylic acid-free adhesive, and have low outgassing of VOCs. Tapes offer resistance to aging with ability to withstand temperature and humidity extremes. Both have polyester film...

ISO-Certified Precision Machining and Contract Manufacturing Services from DFF

DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.