Resins

Polyethylene Resins do not require chemical additives.

Raprex(TM) pre-processed resins are formulated to provide improved physical properties without chemical cross linking agents. Radiation processing of base PE resin results in inhomogeneous cross link distribution in polymer. This results in parts that are higher in mechanical properties than unmodified versions. Available in extrusion, injection molding, and film grades, products exhibit tear...

Read More »
Automotive Wire Harness Tape facilitates recycling.
Adhesive Tapes

Automotive Wire Harness Tape facilitates recycling.

Halogen-free, environmentally compliant Autolon® 824 looks and feels like PVC but emits no toxins during combustion. Harnessing tape consists of polyolefin film single-coated with synthetic rubber pressure-sensitive adhesive. It provides solution for wire harness wrapping, clip retention, and color code identification; offers fogging number from 70-95; withstands temperatures to 85°C;...

Read More »
Epoxy System repairs cast iron and steel to 450°F.
Epoxies

Epoxy System repairs cast iron and steel to 450°F.

Pyro-Putty(TM) 657 repairs pin holes, cracks, and defects in cast iron and sheet metal prior to painting and powder coating. Stainless steel filled, 1-to-1 mix epoxy system provides continuous and intermittent temperature limits of 400 and 450°F, respectively. Dispensable, thixotropic paste cures fully at room temperature in 4-6 hr; cured material exhibits tensile shear strength of 1,860 psi...

Read More »
Machinable Liquid Metals repair, rebuild, and bond.
Epoxies

Machinable Liquid Metals repair, rebuild, and bond.

Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250°F to form machinable material for use up to 500°F. Durabond 7025, rated to 1,000°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250°F. Durabond 7032 Stainless Steel-Ceramic composite...

Read More »
Adhesives

Instant Epoxy withstands temperatures up to 400°F.

Bond-It(TM) 7056 adheres to smooth, rough, or porous surfaces, most plastics, metals, ceramics, glass, and wood and is suitable for joining dissimilar materials. It cures as fast as 4 min, with no fixtures or clamps, to form bond with tensile strength of 3,000 psi at room temperature. Product rebuilds surfaces and fills gaps measuring up to Â-¼ in. It has no sulphur like odors, volatiles, or...

Read More »
Acrylic Adhesive bonds needles and syringes.
Adhesives

Acrylic Adhesive bonds needles and syringes.

MD® Medical Device Adhesive 1193-M-VLV is low viscosity for quick, air-free dispensing into needle hub cavities. It bonds stainless steel cannula to polycarbonate, PVC, and polypropylene hubs. Product cures in fraction of a second when exposed to high intensity UV light. It produces clear bonds with minimal variation in tensile strength values. For in-line inspection, MD 1193-M-VLV contains...

Read More »
Adhesives

Zirconia Adhesive suits automatic dispensing applications.

Resbond(TM) 904 is a 4,000°F, free-flowing, one-component adhesive that cures at room temperature or in 5 min at 200°F. It bonds to metals, ceramics, graphite, and glass and provides electrical, moisture, chemical, and solvent resistance. Applications include production bonding of thermocouples, heat sensors, and critical electronic components.

Read More »
Adhesive Tape suits direct skin applications.
Adhesive Tapes

Adhesive Tape suits direct skin applications.

Woven-fabric Bioflex® Rx632P offers conformability for curved areas of body and suits roll-form and specialized bandage application. Tape consists of tan, woven fabric, single coated with medical-grade acrylic. Pressure-sensitive adhesive removes cleanly without causing skin trauma and is supplied on 42# kraft release liner to allow easy die cutting.

Read More »
Potting Compound seals electrical components/wiring.
Encapsulants

Potting Compound seals electrical components/wiring.

Syon® Tru-Cast® 111 thermally conductive epoxide formulation fills voids completely and cures with minimal air entrapment. Black, aluminum-oxide-filled compound can be used as structural adhesive to create heat-sink lap joints. Depending on curing agent used, mixed viscosity rages from 2,000-20,000 cps, pot life varies from 30 min to 3.5 hr, and functional cure time takes from 24 hr @...

Read More »
Joint Sealant is 2x as strong as former version.
Sealants

Joint Sealant is 2x as strong as former version.

GORE-TEX® creep-resistant, form-in-place gasketing material is made from GORE-TEX® expanded PTFE, which is impervious to most chemicals, suitable for use from -450 to +600°F, and able to withstand pressures to 3,000 psig. Tight-sealing product, suited for most types of sealing applications, is also suited for use in chemical processing plants.

Read More »

All Topics