Adhesives

Adhesive suits medical bonding applications.

Single-component Type 3381 UV-cure adhesive complies with ISO-10993 biocompatibility requirements. It forms flexible bond suitable for applications that must withstand thermal cycling and environmental exposure. Acrylated urethane adhesive bonds dissimilar rigid substrates, making it useful for potting and sealing glass-to-metal joints in medical assembly applications. Adhesive also bonds most...

Read More »
Epoxies

Epoxy System provides moisture resistance.

With hardness rating of 84 and rated viscosity of 60,000 cps, DIEBOND 4460 resists temperatures to 110°C. Solvent-free, 2-component, 100% epoxy system cures overnight at room temperature or in 1.5-2.5 hr @ 50°C to form low stress bonds with various substrates. Minimal out-gassing occurs in applications with temperatures up to 200°C. System is available in bulk packaging as...

Read More »
Copper Tape suits heat sealing units in packaging equipment.
Adhesive Tapes

Copper Tape suits heat sealing units in packaging equipment.

CHEMLAM® uniform, pinhole-free, hardened film is dimensionally stable and resistant to tears, punctures, abrasion, and wear. With layer of PTFE film over PTFE impregnated fiberglass fabric, tape acts as replaceable non-stick surface and prevents flexible packaging films from melting onto heating element and impeding production. It operates effectively at temperatures from -100 to...

Read More »
Coating/Potting Compound coats structural steel columns.
Encapsulants

Coating/Potting Compound coats structural steel columns.

Ceramacast(TM) 589 2-part, silicon-dioxide based, silicate-bonded, chemically-setting ceramic compound is suitable for applications to 2400°F. Dielectric strength and volume resistivity are 100 V/mil and 109 ohm-cm, respectively. Compressive strength is 4,500 psi and coefficient of thermal expansion is 5.5 in./in./°F. Ceramacast(TM) 589 is pneumatically dispensed and reaches full cure...

Read More »
Sealing Equipment Buying Guide
Sponsored

Sealing Equipment Buying Guide

Can't tell the difference between all the different types of sealing equipment? Download this informative sealing equipment buying guide to learn the types, methods, and applications that are available to you.

Read More »
Structural Adhesives are solvent-free.
Adhesives

Structural Adhesives are solvent-free.

PERMABOND® M1305 and M1315 are 2-part, 1:1 mixable, structural acrylics that bond plastics and metals in any combination with flexibility, toughness, and surface adhesion. They offer resistance to peel, fatigue, and impact loads, and will adhere to most structural thermoplastics, thermoset plastics, FRP, stone, ceramics, steel, and aluminum. M1305 and M1315 can join dissimilar materials,...

Read More »
Adhesives

Hot-Melt Adhesive dries clear.

VERSA-MELT® L 34-656A secures wrap-around paper and plastic labels to glass, PVC, and PET bottles of cold water or other non-carbonated, transparent liquids, allowing consumers to see through label and into container. Adhesive may be used with roll-fed and cut-and-stack labelers and is suitable for pick-up and overlap operations. It meets composition requirements of Indirect Food Additives,...

Read More »
Adhesives

Hot-Melt Adhesive is suited for cold-water bottles.

CONTOUR® 34-493A affixes wrap-around labels to food and beverage bottles, provides long open time and tackiness, and dries clear. It holds paper and plastic labels to bottles made of glass, PVC, and PET and is appropriate for roll-fed and cut-and-stack labeling. Operators can run entire speed range from jog speed up to 800 containers/min. Product meets composition requirements of Indirect...

Read More »
Surface Mount Adhesives simplify storage.
Adhesives

Surface Mount Adhesives simplify storage.

TRA-BOND LX70011 is suited for automatic dispensing, while TRA-BOND LX10036 is suited for stenciling applications. Each adhesive is electrically insulating and packaged in pre-mixed syringes for surface-mount applications. Suitable for manufacturing, adhesive does not require -40°C storage.

Read More »
Epoxies

Marine Epoxies cure in temperatures below 40°F.

LTC 38 clear, solvent-free epoxy is suitable for repair and boat building. Epoxy, with mix ratio of 3:2, cures in 20 min @ 65°F and in 2 hr @ 38°F. Corro-Coat FC 2100 FAST CURE is gray pigmented, solvent free, and Kevlar(TM) and ceramic filled. It can be applied and cured underwater. Cure occurs in water or air within 50 min @ 55°F and in 10 hr @ 38°F in water.

Read More »

All Topics