One-Component Sealant offers no slump, non-sag properties.
Sealants

One-Component Sealant offers no slump, non-sag properties.

Bostik® 2175 FS environmentally-sound, 100% solids sealant meets demands of transportation industry. Based on silyl polyurethane sealant hybrid polymer technology, sealant is suited for overhead and vertical seam-sealing and gap-filling applications. Non-yellowing, paint-compatible formula adheres to aluminum, wood, and FRP. It is free of xylene, acetone, MEK, and similar solvents. At...

Read More »
Adhesive System provides thermal conductivity.
Adhesives

Adhesive System provides thermal conductivity.

Silicone-based TRA-CAST 813J01 bonds well to difficult substrates, exhibits low stress, and can cure at room temperatures. Soft and flexible material has medium viscosity prior to cure. Once hardened, adhesive can handle temperatures up to 260°C without reverting. It has low Tg and work life of over 1Â-½ hours. Typical applications include encapsulation of heat sinks, transistors, and...

Read More »
Thermally Conductive Adhesive features 1:1 mix ratio.
Adhesives

Thermally Conductive Adhesive features 1:1 mix ratio.

Two-component, electrically-isolating, EP21AO epoxy adhesive will adhere to similar and dissimilar substrates. Self-leveling paste is 100% reactive and does not contain solvents or volatiles. It has thermal conductivity of 10 BTU/in./ftÂ-²/hr/°F and dielectric strength greater than 400 V/mil. Available in pt, qt, gal, and 5-gal kits, product features Shore D hardness greater than 85,...

Read More »
Adhesive bonds thermocouples for high temperature uses.
Adhesives

Adhesive bonds thermocouples for high temperature uses.

Pyro-Putty® 2400 thermally conductive adhesive, sealant, and metal repair compound is suited for applications up to 2,000°F. Ceramic and stainless steel-filled paste bonds, seals, and repairs defects up to 3/8 in. cross-section in cast iron, steel, and stainless steel components. Single-part, thermally shock-resistant product is water-based and contains no VOCs. It sets at room temperature...

Read More »
Joining System joins PVDF acid waste pipe and fittings.
Sealing Equipment

Joining System joins PVDF acid waste pipe and fittings.

Electrofusion joining system joins polyvinylidene fluoride acid waste pipe and fittings from 1½-6 in. using Rionfuse electrofusion processor built into shock-resistant, splash-proof case. System utilizes fusion coil made from heavy-duty stainless steel coil wire which can be rotated 360° in socket to aid in installation. Able to be interfaced with PC, product ensures leak-free joints and...

Read More »
Pressure Sensitive Adhesive meets medical device guidelines.
Adhesives

Pressure Sensitive Adhesive meets medical device guidelines.

Intended for medical devices where skin contact is possible, TM9616 consists of 1/16 in. white polyethylene foam, double-coated with acrylic-based, hypoallergenic, medical-grade adhesive. Adhesive is protected by semi-bleached kraft release liner with silicone release system on 2 sides. Product is formulated for sustained contact with human skin. Applications include ostomy mounts,...

Read More »
Rubber-Toughened Adhesives are suited for OEM assembly.
Adhesives

Rubber-Toughened Adhesives are suited for OEM assembly.

ZipGrip® adhesives consist of clear-drying cyanoacrylates that bond plastics, rubber, and metal; provide flexibility and impact resistance; and withstand service temperatures to 280°F. Able to attain fixture strength in seconds, adhesives reach functional strength in 60 min and full cure in 24 hr. ZipGrip HV1200 has 1,200 cps viscosity and 3,700 psi tensile shear strength, while...

Read More »
Printer Tapes are designed for low-light signage.
Adhesive Tapes

Printer Tapes are designed for low-light signage.

Used with GlobalMark(TM), PowerMark(TM), HandiMark®, and Labelizer® Plus products, reflective tapes are visible with flashlight or vehicle headlights and suited for low light conditions. Phosphorescent, Glow-In-The-Dark tapes glow for 10 hours and meet ISO, dIN and ASTM standards. Chemically-resistant tag stock meets OSHA 50 lb pull requirement and is suited for lockout and accident...

Read More »
Double-Sided Tapes suit touch screen assembly applications.
Adhesives

Double-Sided Tapes suit touch screen assembly applications.

ARclean® 90178 and 90176 are 0.0035 and 0.005 in. thick non-corrosive tapes that provide perimeter spacer bonding in resistive touch screen and other similar electronic devices. They utilize electronically-clean, acrylic acid-free adhesive, and have low outgassing of VOCs. Tapes offer resistance to aging with ability to withstand temperature and humidity extremes. Both have polyester film...

Read More »
Concrete Patch repairs potholes in 1 hr.
Cement

Concrete Patch repairs potholes in 1 hr.

Hy-Speed 500(TM) emergency repair cement becomes a concrete-hard mass ready for traffic in 1 hr. It expands as it sets, becoming permanent patch that exhibits 3x strength of concrete. Product requires users to add water, mix, then pour. It needs no priming, leveling, or troweling and comes in 5 gal pails.

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics