Epoxy Adhesive suits variety of applications.
Epoxies

Epoxy Adhesive suits variety of applications.

Tra-Bond 970-1N1 sag resistant epoxy adhesive develops aluminum-to-aluminum lab shear strength of 3,000 psi, can reach glass transition temperature of 83°C, and cures to 75 shore D hardness. Available in sizes and packaging to match unique application needs, product is offered in pre-mixed and frozen syringes or in Bipax for room temperature storage.

Read More »
Epoxy has 10 minute working time.
Epoxies

Epoxy has 10 minute working time.

Self-leveling, 100% solids 10 Minute(TM) Epoxy adhesive is formulated for bonding, potting, and cosmetic repairs in various OEM applications. Able to adhere to varied substrates, it is available in clear and black and has fixture time of 20 min. Functional cure is attained in 90 min. Cured product has 2,400 psi tensile shear strength, 20-25 pli peel strength, and 10 lb-ft/inÂ-² impact...

Read More »
Adhesives

Structural Acrylic Adhesive is non-sagging.

SPEEDBONDER(TM) H8000 delivers impact- and peel-resistant bonds on various surfaces including metals and composites. Product consists of 100% reactive, 2-component gel that cures at room temperature and bonds to materials with little or no surface preparation. Capable of filling gaps as large as 0.5 in., adhesive also offers environmental resistance. Product is packaged in 490 ml EPS cartridges,...

Read More »
Adhesive and Coating withstands temperatures to 2,400°F.
Adhesives

Adhesive and Coating withstands temperatures to 2,400°F.

Ceramacoat(TM) 512N high-temperature adhesive and ceramic coating system is used in assembly of ceramic, metal, and plastic electrical components and as coating of high temperature structures requiring corrosion protection. Single part, water-based, silica-filled system offers volume resistivity of 109 ohm-cm and dielectric strength of 250 V/mil at room temperature. Odorless product contains no...

Read More »
Platemounting Tapes suit flexographic printing industry.
Adhesive Tapes

Platemounting Tapes suit flexographic printing industry.

SteelMaster LT adhesive holds photopolymer plates .067 in. and thinner onto steel cylinders. Able to hold during print run, it removes with ease upon job completion. Non-building adhesive maintains initial level of holding power over time. Suited for combination printing, medium-density 52121 Softprint SteelMaster foam tape is coated with SteelMaster LT and allows for fine dot reproduction of...

Read More »
PBT Resins meet UL94-V0 specs in thin-walled components.
Resins

PBT Resins meet UL94-V0 specs in thin-walled components.

Flame-retardant Celanex® 14 Series polybutylene terephthalate resins are non-blooming, so molded parts are essentially free of surface deposits. Celanex 3314, 3214, and 3114 are 30, 15, and 7.5% glass fiber-reinforced, respectively. Celanex 2014 is unfilled, and Celanex 4014 is unfilled and toughened. Resins are suited for connectors, housings, relays, switches, motor end caps, and other...

Read More »
Underfill Material is formulated for flip chip packaging.
Epoxies

Underfill Material is formulated for flip chip packaging.

Hysol® FP4580 low stress liquid epoxy prevents cracking and delamination of chip's inner layers. It works on copper/low k flip chip laminate packages up to 50 x 50 mm with over 4,000 solder bumps. When fully cured, product forms rigid, low warp seal that dissipates stress on solder joints and extends thermal cycling performance. Hysol® FP4580 underfills devices with gaps as small as...

Read More »
Heat Vacuum Applicator offers complete temperature control.
Presses

Heat Vacuum Applicator offers complete temperature control.

AppliPhase HVA enables operators to set control unit for temperature and length of exposure to ensure correct bonding of flexible back-light signage transfers, reflective sheeting, Panaflex signs, backlit awnings, traffic signs, and premask application tape. Features include steel construction and oil-free vacuum pump. Lamp bank and diaphragm may be raised to offer clearance for handling of...

Read More »
Adhesives produce humidity- and weather-resistant bonds.
Adhesives

Adhesives produce humidity- and weather-resistant bonds.

Plastic Welder(TM) non-sagging structural methacrylate adhesives require little or no surface preparation and offer impact and peel resistance. Available in black, white, or off-white, product bonds engineered plastics and dissimilar substrates. It can be used at service temperatures to 250°F and cures at room temperature. Packaging includes 25 ml Dev-Tubes(TM) with built-in plungers; 47 or...

Read More »
Adhesive bonds plastics in seconds without crazing.
Adhesives

Adhesive bonds plastics in seconds without crazing.

UV/visible light curing Ultra Light-Weld® 3094 Series forms clear bonds and does not cause crazing or blooming on plastics. Bonds have gap filling capability and maintain strength through thermal cycling as well as shock, vibration, and impact. Material, available in viscosities of 1,000 cp, 8,000 cp, and 25,000 cp non-flowing gel, cures upon exposure to wavelengths ranging from 300-500 nm....

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics