Fire Retardant Coating protects fragile substrates.
Encapsulants

Fire Retardant Coating protects fragile substrates.

EURO-SEAL 7000 polyurethane encapsulant, suited for use on carved architectural EPS and polyurethane foam elements, provides protection from thermal expansion and UV degradation and strengthens mechanical impact resistance. Able to dry to touch within 10 sec, 2-component, spray-applied polyurethane coating forms hard, chemical-, moisture-, and fire-retardant encapsulation. It enables fabricators...

Read More »
IC Ball Bonder offers 35 µm fine pitch capability.
Bonders

IC Ball Bonder offers 35 µm fine pitch capability.

MaxÂ-µmplusT Ultra High Speed Ball Bonder incorporates 2.20 x 2.60 in. bonding area, S-Scan imaging technology, µT-Sonics(TM) transducer, and Precision-Arc(TM) EFO system. Servo control system for X-Y Table reduces wire cycle times to 63.0 msecs, and Precision-touchT bondhead technology delivers optimum bond force control. Teaching and calibration software delivers bond placement...

Read More »
Adhesives

Cyanoacrylate Adhesives are suited for flexible substrates.

Loctite® 4851(TM) and 4861(TM) clear instant adhesives, suited for use on tubing, o-rings, rubber, paper, leather, and fabric, are formulated to provide reduced hardness. Loctite® 4851(TM) medium-viscosity, single-component adhesive performs general-purpose bonding, while Loctite® 4861(TM) high-viscosity, single-component adhesive bonds porous and absorbent materials. Both offer...

Read More »
Adhesives

Cyanoacrylates cure under fluorescent light.

Low-viscosity Loctite® FLASHCURE(TM) 4306(TM) and medium-viscosity Loctite® FLASHCURE(TM) 4307(TM) offer instant fixture and tack-free surfaces in less than 5 sec when exposed to low-, medium-, or high-intensity light. They are surface insensitive and adhere to metals, elastomers, and plastics. Designed for assembly of components where ability to verify presence of applied adhesive is...

Read More »
Adhesive Tapes

Polyethylene Film Tape works in extreme environments.

Clear, low-density Scapa P933A bonds to common industrial substrates and withstands environmental extremes. It is single-coated with acrylic adhesive formulated to provide high tack, quick stick, and peel strength, while offering humidity, water, and chemical resistance. Able to adhere to metals and engineering plastics, tape features release top-coat that allows film to be converted into...

Read More »
Resins

Polyethylene Resins do not require chemical additives.

Raprex(TM) pre-processed resins are formulated to provide improved physical properties without chemical cross linking agents. Radiation processing of base PE resin results in inhomogeneous cross link distribution in polymer. This results in parts that are higher in mechanical properties than unmodified versions. Available in extrusion, injection molding, and film grades, products exhibit tear...

Read More »
Automotive Wire Harness Tape facilitates recycling.
Adhesive Tapes

Automotive Wire Harness Tape facilitates recycling.

Halogen-free, environmentally compliant Autolon® 824 looks and feels like PVC but emits no toxins during combustion. Harnessing tape consists of polyolefin film single-coated with synthetic rubber pressure-sensitive adhesive. It provides solution for wire harness wrapping, clip retention, and color code identification; offers fogging number from 70-95; withstands temperatures to 85°C;...

Read More »
Epoxy System repairs cast iron and steel to 450°F.
Epoxies

Epoxy System repairs cast iron and steel to 450°F.

Pyro-Putty(TM) 657 repairs pin holes, cracks, and defects in cast iron and sheet metal prior to painting and powder coating. Stainless steel filled, 1-to-1 mix epoxy system provides continuous and intermittent temperature limits of 400 and 450°F, respectively. Dispensable, thixotropic paste cures fully at room temperature in 4-6 hr; cured material exhibits tensile shear strength of 1,860 psi...

Read More »
Machinable Liquid Metals repair, rebuild, and bond.
Epoxies

Machinable Liquid Metals repair, rebuild, and bond.

Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250°F to form machinable material for use up to 500°F. Durabond 7025, rated to 1,000°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250°F. Durabond 7032 Stainless Steel-Ceramic composite...

Read More »
Adhesives

Instant Epoxy withstands temperatures up to 400°F.

Bond-It(TM) 7056 adheres to smooth, rough, or porous surfaces, most plastics, metals, ceramics, glass, and wood and is suitable for joining dissimilar materials. It cures as fast as 4 min, with no fixtures or clamps, to form bond with tensile strength of 3,000 psi at room temperature. Product rebuilds surfaces and fills gaps measuring up to Â-¼ in. It has no sulphur like odors, volatiles, or...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics