Adhesives

Adhesives and Sealants handle temperatures to 200°C.

Medium-viscosity, anaerobic Permabond HM130 prevents loosening of threaded fasteners and is suited for automated assembly processes. Used for cylindrical parts, Permabond HM162 retaining compound fixtures in 2-5 min. GASKETMAKER® Permabond MH196, non-flammable flange sealant forms instant, low-to-moderate pressure-resistant, leak-free seal and allows for metal-to-metal contact. Thixotropic...

Read More »
Instant Adhesives are non-blooming.
Adhesives

Instant Adhesives are non-blooming.

Suited for appearance-sensitive applications, Permabond 940 non-blooming, low-odor adhesives bond plastics, rubber, and metal. Formulated alcoxy-ethyl cyanoacrylates do not result in white frosting on surface of components surrounding bond site. Single-component adhesives cure by reacting to trace amounts of moisture on surface of substrates being bonded.

Read More »
Tape makes rivets, screws, and welds obsolete.
Adhesive Tapes

Tape makes rivets, screws, and welds obsolete.

Model 3M(TM) VHB(TM) Tape can join dissimilar materials like plastic and metal, glass and metal, and aluminum and steel. It disperses pressure along entire length of seam, unlike rivet or joint where stress is concentrated in certain points. When bonding 2 unlike materials, it can resist differing co-efficients of thermal expansion. Tape prevents galvanic corrosion between metals and provides...

Read More »
Protective Masking Tape suits wave solder applications.
Adhesive Tapes

Protective Masking Tape suits wave solder applications.

Scapa 653 paper tape is single-coated with modified silicone pressure-sensitive adhesive. During hot air leveling and wave soldering operations, it provides protection against chemical solvents, solder, and rinse water while adhering to electronic substrates. Tape leaves no adhesive residue upon removal and is suited for low static protection of gold finger or rhodium PBC contacts, assembly...

Read More »
Adhesives

Instant Adhesives cure on dry or acidic surfaces.

Loctite® 4500(TM) and 4501(TM) surface insensitive cyanoacrylate adhesives bond metal, plastic, and elastomeric materials with acidic, porous, and absorbent surfaces. Single-component gel cyanoacrylate Loctite 4500 has consistency that prevents adhesive flow on vertical applications. Wicking viscosity, single component cyanoacrylate Loctite 4501 maintains cure speed for extended time...

Read More »
Liquid Rust Preventive provides long-term protection.
Sealants

Liquid Rust Preventive provides long-term protection.

DRI TOUCH® PLUS IRP3 penetrant and sealant works on impregnated and non-impregnated powdered metal parts, regardless of density or porosity of surface. Low viscosity liquid penetrates remaining porosity of powdered or sintered metals to displace moisture beneath surface. Once dry, it leaves semi-solid protective film that is absorbed by part itself. Protection levels range from 80-120 hr of...

Read More »
DVD Bonding System provides 1,000 W/cm² peak pulse power.
Bonders

DVD Bonding System provides 1,000 W/cm² peak pulse power.

CoolCureXL-DVD® Bonding System features pulsed UV curing lamps capable of 0.6 sec cure times for DVD-5 formats. Tilt management is achieved using lamps on top and bottom during curing process. Eliminating need for DVD repositioning while curing, system uses spiral-shaped lamps that match DVD profile and expose full disc to 1,000 W/cmÂ-² peak pulse power. Pulsed UV curing lamps provide...

Read More »
Pipe Sealant forms flexible bonds.
Sealants

Pipe Sealant forms flexible bonds.

Flex Bond(TM) two-component adhesive bonds flexible piping made of PVC, ABS, and other plastics. Once methacrylate polymer has been applied to 1 of 2 surfaces to be joined, activator can be sprayed on top of polymer or onto other surface. Working time is 3-4 min following activation. Flex Bond requires no mixing, attains functional cure in 1 hr at room temperature, and withstands temperatures to...

Read More »
UV/Visible Sealants bond to PVC, PET, and R-PET plastics.
Sealants

UV/Visible Sealants bond to PVC, PET, and R-PET plastics.

Intended for thermoformed plastic clamshell and tube packaging, Light-Weld® 3081 and 3082 Sealants cure upon exposure to UV light in seconds, allowing production line speeds up to 30 fpm. Products create crystal clear bonds and eliminate marking or discoloration that can occur with heat sealing RF or sonic welding. Solvent- and ODC-free, each adhesive comes in standard and thick viscosity...

Read More »
Adhesive bonds high-temperature electrical components.
Adhesives

Adhesive bonds high-temperature electrical components.

Ceramacast(TM) 586 is a zirconium-silicate based, phosphate-bonded, chemically-setting ceramic compound suited for bonding and potting infrared heaters, gas igniters, and filters in applications to 2800°F. Product is supplied as powder and mixed with water to paste-like consistency. Pneumatically-dispensed adhesive provides 1-hr pot life and hardening time of 6-8 hr. Dielectric strength and...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics