Adhesives & Sealants

Adhesives & Sealants, Green & Clean

Heraeus to Exhibit at Intersolar North America 2014 Exhibition and Conference

Jul 09, 2014

Heraeus PV to showcase new metallization pastes for Standard to UDLE and PERC cell designs WEST CONSHOHOCKEN, Pa. – The Heraeus Photovoltaics Business Unit will be attending Intersolar North America 2014 at the Moscone Center in San Francisco, California from July 8th through 10th, showcasing their new products for standard to ultra LDE cells and PERC cell designs during the exhibition.... Read More

Adhesives & Sealants

Thread Sealant suits plumbing and HVAC/R applications.

Jul 07, 2014

Featuring smooth texture with PTFE resin-enrichment and synthetic fibers, RectorSeal Blue+™ is unrestricted for use with all threaded metal, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Non-setting, lead-free product is formulated for liquid pressures up to 10,000 psi and gas pressures up to 2,000 psi. Since sealant is non-toxic, low-odor, and non-flammable, it is suitable for... Read More

Adhesives & Sealants

3M Announces DK Thermal to Distribute 3M Thermal Interface Materials

Jul 07, 2014

DK Thermal joins growing distributor network to help meet rising demand for thermal interface materials in electronic product design and assembly Bracknell, UK — 3M, the diversified technology company, has announced that DK Thermal Ltd has become a UK distributor of Thermally Conductive Adhesive Tapes from 3M as part of a growing network of partners focused on addressing the increasing... Read More

Adhesives & Sealants

Flooring Solutions maximize safety for athletics and play.

Jul 03, 2014

Tru-Motion™ single-component, moisture cured binders are available for outdoor running tracks and poured-in-place playground safety surfaces, while Tru-Motion 2-component poured elastomer systems suit indoor multi-purpose flooring and outdoor running tracks. Other types of Tru-Motion flooring solutions include single- and 2-component coatings for running track structural sprays and indoor... Read More

Adhesives & Sealants

Catheter Adhesive offers cure, post-cure inspection confirmations.

Jul 01, 2014

Formulated with both Ultra-Red™ and See-Cure technologies, 212-CTH-UR-SC is designed for use in catheter assembly and bonds to various substrates, including platinum and polycarbonate. While in its uncured state, this adhesive is blue to facilitate placement verification. Upon curing with UV light (<3 sec), product transitions to colorless to provide visual confirmation that adhesive... Read More

Adhesives & Sealants, Paints & Coatings

Streamline Your Smart Connected Device Assembly Process with UV-Curable Materials

Jun 27, 2014

From conformal coatings to encapsulants to edgebond materials and display lamination, Dymax Corporation provides innovative, solvent-free, UV light-curing technology solutions for smart connected device assembly. The company offers many cost-reducing solutions that turn problems like shadowed areas, cure confirmation, and production throughput into non-issues.  The newly released selector... Read More

Adhesives & Sealants, Architectural and Civil Engineering Products, Paints & Coatings

Stuart Dean Brings Interior and Exterior Restoration Solutions to AIA 2014 Convention in Chicago

Jun 26, 2014

- Company to Showcase HardCore Product Line and Marcoat - NEW YORK - Stuart Dean will give architects and design professionals a first look at its new HardCore product line for floor and wall resurfacing, restoration and protection at the American Institute of Architects (AIA) 2014 National Convention, taking place June 26-28 in Chicago at McCormick Place. Stuart Dean will also showcase its... Read More

Adhesives & Sealants

Low Viscosity, Two Component Epoxy is Optically Clear with Non-Yellowing Properties

Jun 24, 2014

Low Viscosity, Two Component Epoxy is Optically Clear with Non-Yellowing Properties Master Bond EP112LS is a two part epoxy that is well suited for impregnation, potting, encapsulation, sealing and coating applications, particularly in the aerospace and optoelectronics industries. EP112LS is optically clear, features reliable non-yellowing properties and has a refractive index of 1.55. This... Read More

Adhesives & Sealants, Architectural and Civil Engineering Products, Paints & Coatings

Stuart Dean Highlights Floor and Wall Resurfacing, Restoration and Protection Solutions at BOMA International Show

Jun 20, 2014

- Company Exhibiting June 22-24 in Orlando - NEW YORK - Stuart Dean will give building owners and facility managers a closer look at its new HardCore product line for floor and wall resurfacing, restoration and protection at the 2014 Every Building Conference and Expo, presented by BOMA International and BUILDINGS. Taking place June 22-24, 2014 in Orlando, Fl. at the Gaylord Palms Convention... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Prime Label Substrate Adhesive offers problem-free performance.

Jun 12, 2014

Running without buildup on converting or dispensing equipment, V-01 higher-shear, permanent acrylic adhesive maximizes performance for prime labeling applications. Product adheres to various container types, including low-surface energy HDPE, and offers open time for clean removability of misapplied labels. While compliant with FDA 175.105 for indirect food contact, adhesive also resists effects... Read More

Adhesives & Sealants

High Temperature Adhesive suits applications to 2,300°F.

Jun 09, 2014

Formulated for bonding and coating mica, glass-ceramics, and metals, Ceramabond™ 632 features dielectric strength of 150 V/mil at room temperature, coefficient of thermal expansion of 4.7 ppm/°F, and viscosity of 10,000–25,000 cp. Specific gravity is 1.45–1.50 g/cc and pH is 11.0. Applied using brush, syringe, or pneumatic dispenser, mica-filled adhesive sets rapidly at room... Read More

Adhesives & Sealants, Materials & Material Processing

Optically Clear, Condensation Curing Silicone Offers Superior Dielectric Properties

Jun 04, 2014

Developed for potting and encapsulation applications where an addition cured silicone cannot be used, Master Bond MasterSil 152 is a two component, condensation curing system that only requires air for complete cross-linking. Unlike addition cured systems, there are no substrates that will inhibit the cure. This system fully cures at room temperature in 24-48 hours and has low exotherm. MasterSil... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Materials & Material Processing

Silicone Sealant targets residential windows and doors.

Jun 04, 2014

Consisting of one-part RTV silicone material, Youjie™ Neutral Silicone Sealant cures upon contact with moisture in air to form flexible, silicone rubber seal. Product offers optimized adhesion to variety of construction materials and is suitable for use in wide range of window and door sealing and glazing applications. Available in translucent, black, gray, and white, sealant has neutral... Read More

Adhesives & Sealants, Green & Clean

Save 25-40% on your Energy Costs by Sealing your Ducting

May 20, 2014

Interior Maintenance Company, in Lansdowne, PA, has added AeroSeal Duct Sealing technology to better service its customers.  Duct sealing in commercial buildings is a cost effective method which saves energy, improves air balance and thermal distribution (comfort and ventilation), helps comply with building codes and reduces cross contamination between different zones in a building The... Read More

Adhesives & Sealants, Health, Medical, & Dental Supplies and Equipment, Materials & Material Processing, Non-Industrial Products

Fabrico Medical to Exhibit Advanced Medical Converting Capabilities at MD&M East 2014

May 20, 2014

Rochester, NY – Fabrico Medical, a premier provider of converted materials and advanced assembly for the design-to-manufacture of medical devices and disposables, announces its participation in the MD&M East conference, Booth #749, at the Jacob K. Javits Convention Center, June 10 – 12, 2014 in New York, NY. Fabrico Medical works with medical OEMs and contract manufacturers to test and... Read More

Adhesives & Sealants, Health, Medical, & Dental Supplies and Equipment, Non-Industrial Products

Vancive Medical Technologies(TM) to Exhibit Benehold(TM) Absorbent Wound Dressings at European Wound Management Association

May 19, 2014

Learn More at Booth 10A10 CHICAGO – Vancive Medical Technologies™ will exhibit at the 24th Conference of the European Wound Management Association (EWMA), 14-16 May, 2014 at the IFEMA, Madrid in Madrid, Spain. "Exhibiting at EWMA marks the official launch of BeneHold Absorbent Wound Dressings in Europe," said Colleen Ward, Vice President Global Marketing. "Our products have been shown to... Read More

Adhesives & Sealants, Test & Measuring Instruments

The Relationship between the Hot Tack of Packaging Material and Filling Efficiency

May 14, 2014

The hot sealing performance of packaging materials is the main parameter to assess packaging ability of materials. It includes the hot tack and ultimate strength. Hot tack has been used to check the strength to peel off hot sealing parts, when shortly after hot sealing (not cold yet). Ultimate strength has been used to check the strength to peel off the hot sealing parts, when the parts have... Read More

Adhesives & Sealants, Materials & Material Processing

Potassium Silicate Binder produces high-temperature coatings.

May 14, 2014

Inorganic, water-dispersed Ceramabind™ 643-1, resistant to temperatures to 3,000°F, mixes with range of oxide and metallic powders into inert, electrically, chemically, and wear-resistant material that will not outgas under ultra high vacuum (UHV). Typical uses include formulating corrosion protective coatings for high-temperature metal structures as well as producing chemically resistant... Read More

Adhesives & Sealants

Two Component, Thermally Conductive Epoxy Resists High Temperatures

May 14, 2014

Formulated for bonding and sealing applications, Master Bond EP46HT-1AO is widely used in the aerospace, electronic and specialty OEM industries. Unlike most conventional two component epoxies, EP46HT-1AO cures with the addition of heat, which allows it to have a working life exceeding 24 hours. It has a forgiving 100 to 30 mix ratio by weight and bonds well to metals, composites, glass, ceramics... Read More

Adhesives & Sealants, Paints & Coatings

Michelman Focusing on Water Based Converting Solutions at TAPPI PLACE 2014 Conference

May 14, 2014

CINCINNATI, OH – Michelman will do two presentations at the TAPPI PLACE 2014 Conference being held May 13-15, 2014 in Ponte Vedra, Florida, USA.  The first presentation is entitled "Advances in Aqueous Heat Seal Coatings for Flexible Packaging", and will be presented by Ms. Ginger Cushing, Global Business Development/Industry Manager, Functional Coatings at Michelman.  In her... Read More