Non-Tacky Pre-Preg Materials optimize molding throughput.
Non-adhesive pre-preg thermoset composites (b-stage products) are dry to touch and can be customized to fit range of end-user requirements. Products do not require release film, enhancing storage, handling, and processing rates. Tight resin/substrate ratios ensure consisent reactivity. Available substrates include glass, cotton, paper, carbon fiber, and customer-specific substrates, while choice...
Read More »Patton Launches Industrial-Ethernet and Hardened-Network Gear at ISA EXPO 2006
EtherBITS(TM) Serial Device Servers and EnviroNET(TM) NEMA4 Industrial-Network Solutions Will Take the Spotlight at ISA EXPO 2006 in Booth 2571 and During Patton's Thursday Press Conference GAITHERSBURG, Md., Oct. 10 /At ISA EXPO 2006 next week, Patton Electronics -- the leader in network-access, connectivity, and VoIP -- will showcase new solutions for the industrial-automation network: the...
Read More »SCA Packaging North America Brings Expertise Together
NA companies exhibiting together for the first time at PACK EXPO 2006 DeKalb, IL (September 20, 2006) - SCA Packaging North America will be exhibiting as a single, unified company for the first time at PACK EXPO International 2006 trade show, October 29 - November 2, McCormick Place Convention Center, Booth # S-1466. New developments in consumer, protective and temperature-assured packaging as...
Read More »
Epoxy Adhesive is serviceable at temperatures down to 4-
With 3-minute set-up time, EP51M produces bonds with 2,000+ psi shear strength that exhibits resistance to thermal cycling and chemicals. Bonded parts can be safely handled within 30 min. Product, suited for cryogenic applications, adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Insensitive to cleaning procedures, it can be used in electronic, electrical, computer,...
Read More »
Adhesive Tapes for Personal Protective Equipment Applications
This ebook provides an in-depth overview into adhesive tapes for personal equipment applications.
Read More »Wall Perimeter Sealer facilitates cove applications.
Featuring 100% solids formulation, chemical-resistant Superior Cove Kit is designed for vertical application at floor-wall joints to produce sanitary perimeter seal. This structural epoxy mortar, packaged in pre-measured kits to cover 35 lineal feet (4 in. vertical and 2 ft horizontal at 1/8 in.), requires clean surface prepared via sand blasting, water blasting, or other mechanical means. Each...
Read More »
Single-Part Epoxy System cures with UV light or heat.
Environmentally friendly UV15DC80, suited for bonding, sealing, coating, and potting, requires no mixing and has 100% solids formulation. Uninhibited by oxygen, chemically resistant epoxy contains no solvents or volatiles and adheres to variety of materials. For thicknesses of .010-.020 in., straight UV curing is accomplished within seconds with UV light at 365 nm with 30-40 mW/cmÃ-² of...
Read More »Adhesive Vinyl Films are suited for solvent inkjet printing.
With liner and adhesive compound that make product repositionable during application, HX200WG1 and HX201WG1 High Performance Vinyls feature polyethylene liner that is insensitive to humidity and temperature changes. HX200WG1 has structured gray adhesive liner and HX201WG1 has clear permanent liner. Standard roll sizes are 148 ft long and 54 or 63 in. wide.
Read More »
GE Plastics Optimizes Environmentally Responsible Noryl GTX* Conductive Resin for Powder Coating Processes
Unique, New Material to Join GE's Expanding ecomagination* Product Portfolio, Providing Host of Environmental, Design, Performance, and Production Benefits INDIANAPOLIS - Sept. 19, 2006 - Here at Powder Coating 2006, GE Plastics is exhibiting the first in a new family of conductive Noryl GTX* resins that are optimized for powder coating. These unique materials - slated to join GE's growing...
Read More »
Henkel to Present Latest Research and Show Current Materials Innovations at Upcoming ATExpo Event
Irvine, California, September 7, 2006- With several new products on display and leading technical staff set to present four papers on the company's latest ground-breaking materials research, Henkel is poised to be one of the main attractions at the upcoming Assembly Technology Expo (ATExpo), scheduled to take place September 26-28, 2006 in Rosemont, Illinois. Henkel Applications Engineering Team...
Read More »
ITW Plexus Acquires Rights to Surfacing Adhesives
DANVERS, MA - ITW Plexus has acquired the rights to manufacture and market two adhesive product lines developed by ACS International, Inc. (ACS), a supplier of various materials for the surfacing industry. Under the agreement with Arizona-based ACS, Plexus will sell Acrybond(TM) and StoneweldÃ-® adhesives to manufacturers and fabricators of natural- and simulated-stone countertops, bathroom...
Read More »
Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »
