Dow Corning® Z-2306 Silane Offers New Level of Concrete Protection
Sealants

Dow Corning® Z-2306 Silane Offers New Level of Concrete Protection

Midland, Mich. - August 25, 2006 - Dow Corning® Z-2306 Silane, a high-purity isobutyltriethoxysilane, can be used to formulate water repellent products that protect concrete structures from water absorption and chlorine ion ingress. When diluted with an appropriate solvent and applied properly, the Dow Corning Z-2306 Silane solution will penetrate and provide water repellence by chemically...

Read More »
Resins

Plastic Resins target global automotive manufacturers.

Chemical, thermal, and impact resistant Valox iQ and Xenoy iQ resins are derived from 85% post-consumer plastic waste and manufactured with process intended to conserve non-renewable fuel resources and reduce CO2 emissions. Valox iQ is made with polybutylene terephthalate (PBT)-based polymers, while Xenoy iQ is alloy of polycarbonate and PBT-based polymers. Resins are suited for automotive...

Read More »
Adhesive is formulated for strength and flexibility.
Epoxies

Adhesive is formulated for strength and flexibility.

Epoxy-casting compound, TRA-CAST 316C01, is low-viscosity material that exhibits minimal residual stress and near-zero shrinkage. Able to bond to ceramics, glass, plastics, and metals, product offers self-sealing properties that make it useful for electronics and aerospace applications. Electrical insulator is resistant to water, weather, gases and vapors, petroleum products, mild acids and...

Read More »
Adhesive is suited for bonding semiporous materials.
Epoxies

Adhesive is suited for bonding semiporous materials.

Available in pre-mixed and frozen syringes, TRA-BOND 342-14T single-component, alumina-filled epoxy adhesive has low-viscosity formulation that exhibits thermal shock resistance. Material may be cured overnight at ambient conditions or at elevated temperatures for accelerated cure time. It adheres to various substrates and is suited for bonding materials such as ferrite, which require physical,...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Masking Material protects metal component surfaces.
Masks and Masking

Masking Material protects metal component surfaces.

Available in gel, brush-on, or spray-on formulations, SpeedMask® UV Curable Masking Resin provides surface protection from contamination caused by acids, alkalines, plating solutions, and ambient debris from air plasma spray, HVOF, grinding, peening, and grit blasting. Single-component, temporary masking resin is solvent-free, non-flammable, urethane-based, and water-soluble, and easily...

Read More »
Resins

With Alextra(TM), Allen Extruders Launches a New Composite Technology to Meet the Demands of Extreme Environments

GE Plastics' Lexan* SLX Resin Provides Stunning Aesthetics and Performance PITTSFIELD, MASS. - July 20, 2006 - Allen Extruders, one of the largest U.S. producers of custom thermoplastic sheet, today launches Alextra(TM), a revolutionary new line of thermoplastic sheet products that meets the demanding performance requirements of extreme environments. Through close collaboration with GE Plastics,...

Read More »
Alumina Adhesive can be used in applications up to 3,000°F.
Adhesives

Alumina Adhesive can be used in applications up to 3,000°F.

Resbond(TM) 989F combines 600 nm, Ultra Fine Alumina with high temperature colloidal ceramic binders. When cured at room temperature or in 5 min at 200Â-ºF, material exhibits electrical, moisture, chemical, and solvent resistance. Single-component material adheres to metals, ceramics, graphite, or glass and can be used in fine dispensers without clogging or mess. It can bond super fine...

Read More »
Epoxy Adhesive acts as electrical insulator.
Epoxies

Epoxy Adhesive acts as electrical insulator.

Model EP21 2-component, room temperature curing, epoxy adhesive allows adjustment of properties by altering mix ratio. Adhesive holds up to thermal cycling and resists chemicals including water, oils, fuels, acids, bases, and salts. With gap filling properties and operating temperature of -60 to 250°F, adhesive bonds to variety of substrates and does not contain any diluents or solvents.

Read More »
Composite suits pallets used in wave solder applications.
Pallets

Composite suits pallets used in wave solder applications.

Made from epoxy resin and random mat glass substrate, WaveMax(TM) 7000 thermoset composite is suited for high-volume production runs that require solder pallet to maintain strength at temperatures up to 315°C for as many as 5,000 soldering cycles. Ratio of glass to epoxy maximizes flexural strength and rigidity, with flexural strength of 59,000 psi and up to 39,000 psi at elevated...

Read More »
Adhesives

Adhesive Paste suits stacked die applications.

Designed to meet requirements of semiconductor firms, Hysol® QMI536NB can be used on all levels of stacked die. Non-conductive, PTFE-filled paste exhibits low resin bleed and is lead-free compatible. After multiple exposures to 260°C+ reflow temperatures, Hysol QMI536NB's provides resistance to delamination and popcorning. Product is suited for variety of materials, including solder...

Read More »

All Topics