Adhesives

Polyurethane Adhesives are mercury free.

With cure time of 6 hr at 77Â-ºF, Araldite 2041-1 and 2042-1 are suited for bonding substrates such as polycarbonate, ABS, nylon and Metton® liquid molding resin with minimal surface preparation. Adhesives are blended with 1:1 mix ratio by volume, and feature approximately 250% elongation and 2,100 psi lap shear strength on primed aluminum panels at room temperature. Colored black,...

Read More »
Adhesive Tapes

Adhesive Tape provides masking and surface protection.

Consisting of 4.5 mil polyethylene film, single-coated with UV-stable synthetic rubber adhesive, Polyflex 433 resists UV exposure and maintains watertight seal in all weather conditions. It bonds well to variety of substrates, leaves no residue upon removal, and offers chemical resistance. For building construction, product is suited for masking windows and doors during stucco or paint...

Read More »
Adhesive Tapes

Silicone Adhesive Tape withstands temperatures to 500°F.

Single-coated with silicone adhesive, Scapa C401 non-flammable adhesive tape insulates heavy-duty electrical equipment, protects circuitry during wave solder, and masks surfaces during high-temperature coating processes. Glass cloth backing provides dimensional stability and strength, allowing product to retain physical properties in extreme environments. While product adheres to various...

Read More »
Epoxies

Silver Epoxy Conductive Adhesive cures at room temperature.

Silver-filled ALFA E10-101 develops electrically conductive bonds and coatings between different and dissimilar materials such as metals, ceramics, glass, and plastic laminates. Smooth paste of refined silver and epoxy, free of solvents and copper or carbon additives, can be used as cold-solder for heat-sensitive components where hot soldering is impractical. It comes in 2-chamber plastic pouches...

Read More »
Transfer Adhesive bonds low surface energy materials.
Adhesives

Transfer Adhesive bonds low surface energy materials.

Supplied with 60 lb kraft release liner, Unifilm® U741 bonds materials such as plastics, Lexan®, ABS, and polypropylene. Aggressive 3 mil acrylic transfer adhesive provides consistent, lasting bond upon lamination and is suited for bonding decals and nameplates. High-tack adhesive, resistant to water and ambient humidity, can also be used for general-purpose product assembly and for...

Read More »
Polyester Film Tape bonds to foam and gasket materials.
Adhesive Tapes

Polyester Film Tape bonds to foam and gasket materials.

Available in 44 and 60 in. roll widths, double-coated 3175M is suited for automotive, electronics, construction, graphic arts, medical, and general industrial applications. Rubber-based adhesive on exposed side bonds polyurethane and polyethylene foams, felt, rubber, sponge, cork, abrasive, and gasket materials. Liner side consists of rubber-based adhesive that bonds to most substrates at room...

Read More »
Structural Adhesive creates flexible bonds.
Adhesives

Structural Adhesive creates flexible bonds.

Suitable for securing honeycombed floor and ceiling panels in commercial airplanes, flame-retardant 10 Minute(TM) Epoxy FR passes federal 60 sec vertical burn test (14 CFR 25.853/25.885). Mixed as dispensed, epoxy features 80,000 cps viscosity, 10 min working time, 20 min fixture time, and functional cure time of 3 hr at 72°F. Epoxy features 25 pli peel strength, 10 ft-lb/in.Â-² impact...

Read More »
Adhesive Pads protect glass during shipping.
Adhesives

Adhesive Pads protect glass during shipping.

Klean-Stick(TM) Separator Pads feature removable pressure-sensitive adhesive that is dry to touch, resistant to 300°F, and can be removed without leaving residue. Adhering to glass, mirrors, and metal during transporting, packing, storage, and installation, pads set between glass pieces adsorb vibration, maintain position, and prevent breakage. Pads are supplied on kiss cut rolls or pads...

Read More »
Assembly Sealant provides instant adhesion.
Adhesives

Assembly Sealant provides instant adhesion.

Utilizing hot melt technology, HM-2510 combines crosslinked silicone sealant with instant green strength of pressure sensitive adhesive, meaning that parts can be moved immediately from one processing step to another. It offers aggressive adhesion to PVC, aluminum, painted and treated wood, paints, and plastics. Optimized for use with automated dispensing equipment, non-hazardous, low-odor...

Read More »
Induction Sealer applies foil directly to container.
Sealing Equipment

Induction Sealer applies foil directly to container.

Capless induction sealer offers packagers sealing solution for applying foil barrier or protective seal when cap is not required. It may also be used when it is advantageous to seal container before applying cap. Able to seal variety of container shapes and sizes, product can be mounted vertically or horizontally and operates from 120 or 240 V. Waterless solution features solid-state construction...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers