Adhesive Tapes

Striping Product offers odorless alternative to painting.

Requiring no drying time, MightyLine aisle striping system is made of extruded PVC with pressure sensitive adhesive backing. It comes in 7 standard colors and can be matched to any other color. Product also comes in yellow and red with various colored center lines, including luminescent MightyGlow(TM). Produced in 2, 3, 4, and 6 in. widths on 100 ft rolls, system is also available with acrylic...

Read More »
Resins

Heat-Resistant Resins suit automotive lighting applications.

Lexan® Xtreme Heat (XHT) resins offer automotive lighting designers material choices for demanding applications. Exhibiting resistance to deformation and color shift under high-heat conditions, they are suited for auto headlamp bezels and reflectors. Resins have specific gravity of 1.22 and offer flow characteristics for injection molding. When used on bezels and reflectors, resins enable...

Read More »
Encapsulants

Polyurethane Potting Compounds range from Shore A 25-90.

Suited for continuous exposure in wet environments, Series 20-2300 does not absorb any moisture and will therefore insulate electronic systems in damp or wet applications. Compounds do not impart any stress on components during cure or when thermal cycled in assemblies. They offer suitable alternative to silicone systems due to flexibility, electrical insulating properties, and ability to adhere...

Read More »
Silicone

Thermal Interface Material has low-viscosity formulation.

Developed to address contamination issues in dense electronic systems, EPM-2493 electronic packaging material (EPM) meets requirements of high-temperature and high-stress operating conditions in electronic packaging. This low-outgassing material is designed to work in environments with drastic temperature cycling that would otherwise result in encapsulant embrittling or outgassing.

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Epoxies

Epoxy Adhesives suit flexible circuit designs.

Formulated for technically demanding circuit applications, R/flex JADE Series meets flammability requirements without use of halogens. RoHS-compliant products display thermal stability and can withstand multiple passes through lead-free soldering. Transparent adhesives facilitate optical inspection and are available in bonding film, coverlay, and flexible copper clad laminate constructions....

Read More »
Adhesives

Polyurethane Adhesives are mercury free.

With cure time of 6 hr at 77Â-ºF, Araldite 2041-1 and 2042-1 are suited for bonding substrates such as polycarbonate, ABS, nylon and Metton® liquid molding resin with minimal surface preparation. Adhesives are blended with 1:1 mix ratio by volume, and feature approximately 250% elongation and 2,100 psi lap shear strength on primed aluminum panels at room temperature. Colored black,...

Read More »
Adhesive Tapes

Adhesive Tape provides masking and surface protection.

Consisting of 4.5 mil polyethylene film, single-coated with UV-stable synthetic rubber adhesive, Polyflex 433 resists UV exposure and maintains watertight seal in all weather conditions. It bonds well to variety of substrates, leaves no residue upon removal, and offers chemical resistance. For building construction, product is suited for masking windows and doors during stucco or paint...

Read More »
Adhesive Tapes

Silicone Adhesive Tape withstands temperatures to 500°F.

Single-coated with silicone adhesive, Scapa C401 non-flammable adhesive tape insulates heavy-duty electrical equipment, protects circuitry during wave solder, and masks surfaces during high-temperature coating processes. Glass cloth backing provides dimensional stability and strength, allowing product to retain physical properties in extreme environments. While product adheres to various...

Read More »
Epoxies

Silver Epoxy Conductive Adhesive cures at room temperature.

Silver-filled ALFA E10-101 develops electrically conductive bonds and coatings between different and dissimilar materials such as metals, ceramics, glass, and plastic laminates. Smooth paste of refined silver and epoxy, free of solvents and copper or carbon additives, can be used as cold-solder for heat-sensitive components where hot soldering is impractical. It comes in 2-chamber plastic pouches...

Read More »
Transfer Adhesive bonds low surface energy materials.
Adhesives

Transfer Adhesive bonds low surface energy materials.

Supplied with 60 lb kraft release liner, Unifilm® U741 bonds materials such as plastics, Lexan®, ABS, and polypropylene. Aggressive 3 mil acrylic transfer adhesive provides consistent, lasting bond upon lamination and is suited for bonding decals and nameplates. High-tack adhesive, resistant to water and ambient humidity, can also be used for general-purpose product assembly and for...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics