Receive industry and products news from the market categories that matter to you most.
Stay up to date on industry news and trends, product announcements and the latest innovations.
Adhesives & Sealants
SEAL-IT(TM) water-based, asphalt emulsion stops leaks on flat roofs in any weather above 40Â°F. It minimizes water-damage to any interior by forming waterproof patches on holes and cracks in minutes. Once exposed to air, it hardens to flexible patch that can remain in place when permanent repair is made. Read More
External Mix allows two-part, structural acrylic adhesives to be thoroughly blended and applied without use of static mix nozzles. It eliminates need to replace or purge static mixers. With system, adhesives cure at room temperature, achieve handling strength in less than 60 sec, and fill gaps up to 0.1 in. It can be used with any of company's mixable, structural acrylic adhesives. Read More
Araldite(R) 2000 adhesives bond most thermoplastics including ABS, PVC, polyester, polystyrenes, and acrylics as well as fiberglass-reinforced composites. They can join plastics to metals, concrete or stone, usually with minimal pretreatment. Adhesives include Araldite 2021, for bonding to ferrous metals and thermoplastics; 2022 for assembly of hard-to-bond plastic and composite substrates; and... Read More
Fast-curing, toughened Araldite 2010 epoxy; clear, flexible Araldite 2026 polyurethane; and 10-min cure Araldite 2027 polyurethane adhesives produce durable joints on hard-to-bond thermoplastic, metal and glass substrates and sheet molding compounds (SMC). Adhesives are packaged in 50 and 200 ml cartridges as well as in larger containers for bulk handling. Cartridges provide for precise mixing... Read More
Two part EP21TDC-4 for bonding, sealing, and coating applications cures at ambient or elevated temperatures. It has high peel strength, elongation of over 300%, and forms bonds that resist vibration, impact, and shock, plus fuels, water, oils, and many chemicals. No solvents or diluents are emitted during cure. It adheres to natural rubber, neoprene, nitride, and SBR rubber compounds without... Read More
Metal Welder(TM) structural methacrylate adhesive is designed for bonding metal to other metals or to dissimilar substrates. It provides impact and peel resistance on bare, painted, plated or galvanized metals. Adhesive cures at room temperature in 1 hour. It produces permanent, load-bearing bonds that are resistant to weathering, humidity, temperatures to 250 deg F, and thermal shock. Tensile... Read More
High-clarity, UV/visible light-curing adhesives offer viscosities from 300 to 25,000 cP and elongation from 120 to 175%. Fiber-optic adhesives include OP-52 medium-viscosity grade and OP-54 low-viscosity, wicking grade for butt bonding, bundling, and splitting. OP-18 may be peeled off like tape, and OP-19 and OP-19G are water soluble grades. Adhesives cure in seconds and offer moisture... Read More
PUR-FECT LOK(R) 34-969A polyurethane, reactive adhesive allows user to see if application device is dispensing correct amount based on shade of blue. Lighter shade indicates bond strength may not be sufficient and darker shade represents too much adhesive. Moisture-cured, 100% solids adhesive offers immediate handling strength and deflection resistance. Applications include assembly bonding,... Read More
Don't miss the latest news!
Cationic Type V157 and V197 epoxies can be applied and irradiated with long-wave UV light in the range of 325-380 nm or with visible light in the range of 400-500 nm. Wide-range response lets adhesives be processed with many different existing light sources. Response to longer wave visible light is beneficial when bonding various engineering plastics such as Kapton and Lexan, which do not... Read More
Two-component urethane series encapsulants have durometers from 25 to 55 Shore A. Unfilled materials maintain integrity over operating temperature range of -40 deg to 125 deg C. Glass transition temperature of -72 deg C makes them suitable for low temperature potting applications. They offer electrical insulation, thermal cycling stability, chemical resistance, and no shrinkage. Mixed viscosities... Read More
Duofoam(R) S846VA double-coated, polyethylene-foam mounting tape is coated with acrylic, pressure-sensitive adhesive. It suits mounting and bonding applications that require resistance to environmental extremes and provides holding power to irregular surfaces. Closed cell foam will not absorb water. Product bonds to metal and engineered-plastic surfaces, and is suitable for automotive, gasketing,... Read More
ANAEBONd AB202 non-anaerobic adhesive is approved for field repair terminations. Suitable for bonding glass, its packaging allows for terminations in 2-3 minutes without heat. Fully cured material reduces pistoning in adverse environmental conditions. ANGSTROMBONdÂ® AB9112 epoxy, approved to Mil A-24792A for use in OEM fiber optic terminations, will not cause cracking in multimode connectors.... Read More
EasySplice(TM) PrintLine straight line paster tape for roll-to-roll splicing eliminates glue, need for nose tabs, and possibility of glue contamination on cylinders and idler rollers. It uses standard application procedure regardless of press type, paper grade/weight, or web width. Read More
EFD(R) 1500D dispenser fills cavities with identical amounts of epoxies, silicones and potting compounds. Tabletop unit operates on compressed air and electricity. Potting material is loaded into disposable syringe, which connects to dispenser by air line. To set, user holds syringe like a pen, inserts tip into lower part of cavity, and uses dispenser's teach function to set fill volume.... Read More
PolyflexÂ® 820 single coated polyethylene tape, with rubber-based adhesive, is suitable for wire harness and component part identification, surface protection, and automotive assembly. It bonds to most surfaces over wide temperature range. Tape is highly conformable, maintains watertight seal in all weather conditions, and offers good tear characteristics. Read More
Available in orange, red, red/orange and green, Industrial Tough CoatÂ® I.D. fluorescent paints provide visibility for labeling, coding, and marking of all steel substrates. Paints dry to touch in 15 minutes (77 deg F, 50 relative humidity), allowing for production speed marking. Suitable for identification of inventoried parts, materials, and work-in-progress, paints have high solids content... Read More
Nonrusting, epoxy-based Underwater Repair Putty penetrates moisture and forms strong, permanent seal. It eliminates need to dry substrates before beginning repairs, making it suitable for repairing, patching, or rebuilding wet or submerged equipment. Putty bonds securely to steel, iron, aluminum, brass, bronze, concrete, wood, and selected plastics. It cures at temperatures as low as 40 deg F and... Read More
Gasketing and Sealing Line includes UL listed clip-on compression gaskets made of EPDM with NEMA 4 sealing and UV resistance; UL 94 flame retardant clip-on compression profiles with NEMA 4 sealing capability; and EMC conductive coated clip-on EPDM gasket profiles. UL 94 flame retardant neoprene closed-cell sealing tape is available with adhesive backing and internal cross-threading for... Read More
TRA-BOND 933-1 one-part, filled chip encapsulant provides moisture resistance and electrical insulation. Coefficient of thermal expansion minimizes stress effects on components and wiring during thermal shock tests. Read More
Clear TRA-BOND 2113 adhesive makes strong bonds to glass, ceramics, metals and plastics, and is resistant to weather, salts, mild acids and alkalis, organics and inorganics. It can be used for bonding, laminating, sealing and small volume potting. Epoxy has good wetting and flowability, low CTE and operating temperature up to 130Â°C. It cures at room temperature. Read More