Adchem's Variety of Acrylic and Rubber Based Transfer Tapes on 12-pt Board Liner Assists Converters and End Users
Adhesive Tapes

Adchem's Variety of Acrylic and Rubber Based Transfer Tapes on 12-pt Board Liner Assists Converters and End Users

Adchem Corporation, ISO 9001-2000 certified engineers and manufacturers of adhesive tapes, has six transfer tapes, two rubber based and four acrylic based that are routine manufactured on 12-pt board for their network of converters. These transfer tapes vary in caliper from 2 to 5 mils and cover a variety of bonding applications. Many meet automotive specifications. 12-pt board liners alleviate...

Read More »
Epoxies

KNOT-TEC(TM) Wood Repair System at the International Woodworking Fair

Power Adhesives showed, demonstrated and introduced its advanced KNOT-TEC(TM) wood repair system at the International Woodworking Fair (IWF) in Atlanta, GA August 20-23, 2008. The unique KNOT-TEC(TM) wood repair system from Power Adhesives lets manufacturers, home builders, remodelers or do it yourselfers use an entire board rather than cut it before a knot or defect to eliminate waste, increase...

Read More »
Sealants

Gasket Material suits tack-free surface applications.

With high adhesion to plastics, Light Weld® GA-140 soft gasket material provides barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances. UV/Visible light-curable form-in-place and cure-in-place gasket is used for sealing fuel cells, appliance housings, and electronic assemblies. Low out-gassing unit can be dispensed into intricate and complex...

Read More »
Epoxies

Conductive Inks/Adhesives suit thin film photovoltaic cells.

Adhering to variety of transparent conductive oxides, Silver Conductive Inks and Adhesives operate in high humidity environments and provide optimal environmental aging. Inks are used in grid lines and buss bars printed onto TCO's in thin film solar cells, while adhesives connect multiple solar cells to build arrays. Two-component 118-09A/B187 ink offers 0.0005 W-cm volume resistivity, while...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Acrylic Foam Tapes are suited for solar panel assembly.
Adhesive Tapes

Acrylic Foam Tapes are suited for solar panel assembly.

Providing permanent bonds to glass, foil, metal, composite, and plastic substrates, Scapa acrylic foam tapes (AFT) help protect solar panel assembly from corrosion, vibration, and other stresses found in outdoor applications. Formulated to withstand UV, weather, and temperature variations as well as thermal movement, tapes maintain adhesion even at sub-zero temperatures, offer aging and...

Read More »
Adhesives

Spray Foam Solution is designed for roofing applications.

Utilized for patching and repairing polyurethane roofs, Handi-Foam® SPF Roof Patch has R-value of 6.1/in., retaining insulation value and meeting commercial roofing codes for compression strength of polyurethane foam roofs. Offered in portable kit that includes Handi-Gun®, it maintains monolithic seal preventing air/moisture infiltration, and suits maintenance and repair work on HVAC...

Read More »
Additives

Epoxy Resin and Accelerant create damp proof membrane.

Consisting of solvent free, 2-part epoxy resin system, DPM IT One Coat cures within 18-24 hr to provide waterproof surface membrane. Product prevents passage of moisture into subsequent layers, is pigmented blue for visual control over coverage uniformity, and is suitable for isolating moisture where relative humidity values are above 92%. Designed for use with damp proof membranes, DPM IT A...

Read More »
Adhesives

Collaborations for Advanced Hot Melt Extrusion

Karlsruhe, Germany and Mumbai, India (June 30, 2008) - Thermo Fisher Scientific Inc., the world leader in serving science, and Pharma Polymers, a business line of Evonik Industries, today announced a cooperation designed to advance the hot melt extrusion process in the pharmaceutical industry. By combining the formulation and EUDRAGIT® polymer expertise of Evonik with best-in-class...

Read More »
Two Component Epoxy Adhesive cures at room temperature.
Epoxies

Two Component Epoxy Adhesive cures at room temperature.

Available in Â-½ pint, pint, quart, gallon, and 5 gal kits, Master Bond EP30 features low viscosity, chemical resistance, dimensional stability, hardness, optical clarity, and electrical insulation properties. It is used in potting and encapsulating electronic components as well as in bonding optical elements, and has adhesion to metals, ceramics, glass, and plastics. EP30 has lap shear...

Read More »
Molding Services

Polypropylene LGF Resins target global automotive industry.

SABIC® STAMAX polypropylene long-glass-fiber resins are formulated to replace steel in components such as front-end and door modules and offer lightweight solutions for fuel efficiency and emissions reduction. Resins offer design flexibility for part consolidation as well as performance properties including high stiffness, dimensional stability, high flow, and good crash behavior. Flow...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics