Film Compound is suited for compostable bag production.
Miscellaneous Film

Film Compound is suited for compostable bag production.

Pelletized mineral-containing BioTuf 976 film compound is based on blend of biodegradable resins, including aliphatic/aromatic co-polyester. Designed to be extruded and converted on standard low density PE or grooved-feed HMW-HDPE processing equipment, compound produces films with physical properties similar to linear-low density polyethylene.

Read More »
Mounting Tape provides 1.4 W/mK of thermal conductivity.
Adhesive Tapes

Mounting Tape provides 1.4 W/mK of thermal conductivity.

Featuring thermal impedance of just 208°C-mm2/W, double-sided adhesive tape Keratherm® KL 90 consists of ceramic-filled acrylic adhesive film that provides bonding properties, and replaces use of mechanical fasteners. Silicone-free tape is 0.300 mm thick and is supplied on 400 mm wide rolls, while custom die-cut shapes are also available. Fiberglass-reinforced version KL 91 is...

Read More »
Adhesive has thermal conductivity of 2.2 W/m-°K.
Adhesives

Adhesive has thermal conductivity of 2.2 W/m-°K.

Offering volume resistivity of less than 0.0008 W-cm at room temperature, Aremco-Bond(TM) 556-LV features continuous operating temperature range at 340°F, intermittent use temperature of 375°F, tensile shear strength at 1,100 psi, Shore D hardness of 84, and viscosity range between 4,000-6,000 cP. It mixes in 100:4 ratio by weight, and sets at room temperature in 24 hr or can be heat...

Read More »
Underfill combines optimal flow, cure, and THB performance.
Adhesives

Underfill combines optimal flow, cure, and THB performance.

Hysol® UF3800(TM) exhibits lack of need for substrate pre-heat that, combined with room temperature fast flow and low-temperature curing properties, helps manufacturers improve throughput rates. Designed for use with CSP and BGA devices, halogen-free underfill has reworkable nature and offers stable electrical performance under temperature humidity bias (THB). Solution is compatible with...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Gasketing Tapes create seal between 2 surfaces.
Adhesive Tapes

Gasketing Tapes create seal between 2 surfaces.

Industrial Gasketing foam tape, available in urethane, neoprene, felt, cork, Gore-tex, self-adhesive, and non-adhesive materials, are used to create seal between 2 surfaces. Product has adhesive on one side and is soft enough to conform to other surface when pressed down. Some products may also be used as anti-skid and anti-scratch pads, and all versions can be cut to shape. Printing and tape...

Read More »
Grease

Lubricants and Sealants are offered with 7 oz plungers.

OC Five Paste and OC Seven Grease are available with plungers that facilitate precise application and provide leak-tight seals for cylinder threads, valves, regulators, o-rings, gaskets, and more. Both products are suitable for use in critical applications, where compatibility with oxygen, resistance to aggressive chemicals, and service failure cannot be tolerated. Their properties remain...

Read More »
Adhesives

Hot Melt Adhesive bonds carpet tack strips.

Suitable for use with HB 220 Hot Melt Glue Gun, Series UX 8012 creates non-toxic bond between carpet tack or metal clips and finished concrete, fiber cement backer, or wood before stretching carpet over floor. One inch glue strip is used for each 4 ft of carpet tack or metal strip. With open time of 40 sec, adhesive must be applied at 390°F to achieve max bond strength. Product dries firm...

Read More »
Conductive Electrical Adhesive suits applications to 500°F.
Epoxies

Conductive Electrical Adhesive suits applications to 500°F.

Offering alternative to silver-filled, electrically conductive epoxies, nickel-filled Duralco 122 cures at room temperature in 16-24 hr at 75°F or can be fast cured in 10 min at 200°F. Resistant to moisture, chemicals, and solvents, 2-part epoxy bonds well to glass, ceramics, plastics, dissimilar materials, and metals, including steel, stainless, aluminum, and lead. It is suited for...

Read More »
Composites perform well in petrochemical applications.
Resins

Composites perform well in petrochemical applications.

Consisting of multiple plies of woven fiberglass saturated with polyimide resin, P95 offers high mechanical strength and low coefficient of thermal expansion. Material maintains physical properties at temperatures up to 240°C, and other properties, such as compressive strength of 70,000 psi, low moisture absorption, and chemical resistance, allow use in variety of harsh environments. It is...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics