Void-Fill Packaging System uses 100% recycled paper.
Packaging Machinery

Void-Fill Packaging System uses 100% recycled paper.

Capable of operating at up to 260 fpm, FasFil(TM) System uses 3 pre-set speeds to create pad-shaped paper for void-fill applications. System adapts to on-demand workstations or high-volume continuous feed environments with multiple packaging stations. Available in 3 height configurations, FasFil features drop-in front and back loading design and foot pedal operation. Customers can choose weight,...

Read More »
Silicone Foam Tape increase outdoor enclosure protection.
Adhesive Tapes

Silicone Foam Tape increase outdoor enclosure protection.

Primarily used to seal out environmental hazards from electrical, communications, and HVAC enclosures, S-500 and S-700 combine lightweight nature of foam with sealing strength of sponge rubber. Products feature pressure-sensitive acrylic adhesive (S-500) or pressure-sensitive silicone adhesive (S-700). Also able to isolate vibration, tapes are UL recognized for flame retardance and come in...

Read More »
Repair Compounds

Wet Peel Ply provides clean bonding surface.

Used for surface preparation of composite substrates, Hysol® EA 9896(TM) WPP resin impregnated nylon peel ply optimizes process efficiency by eliminating need for sanding or grit blasting. Composite bonding film also eliminates residual peel ply fibers at bond surface after curing and removal.

Read More »
Resins

LLDPE Resin enhances high-throughput flexible packaging films.

Suited for high-throughput lamination and protective film applications, XZ 89446.00 linear low density polyethylene (LLDPE) resin exhibits qualities that promote conversion rate processability and seal. Polyolefin copolymer LLDPE, used for blown and cast flexible packaging film structures, can be used alone or in blends with low density polyethylene (LDPE) and has 2 g/10 min Melt Flow index and...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Pressure Sensitive Adhesive is designed for use on vinyl.
Adhesives

Pressure Sensitive Adhesive is designed for use on vinyl.

Covinax 404 vinyl acrylic copolymer was developed specifically for use in adhering vinyl to other substrates. It is suited for use with vinyl lettering applied on banners and other signage, works on metal, and performs well in outdoor environments. It features approximately 3 lb of peel and 3,000 minutes in shear, making it also useable as permanent general-purpose adhesive. It works well on many...

Read More »
Polyurethane

BASF Scores Big at SPE® Automotive Innovation Awards Gala Two Category Wins, Two Finalist Placements

WYANDOTTE, MI, November 13, 2009 - Last night, the Society of Plastics Engineers® International (SPE) held its 39th-annual Automotive Innovation Awards Gala at Burton Manor in Livonia, Michigan. More than 50 parts were entered in the competition and BASF was awarded wins in two of the 10 judging categories: Materials and Powertrain. BASF's Acrodur® thermosetting acrylic copolymer was...

Read More »
Clear Epoxy Encapsulant has pourable formulation.
Encapsulants

Clear Epoxy Encapsulant has pourable formulation.

Bio Clear 810(TM) is solvent free, clear epoxy used for object encapsulation (marine, electronic, and gift industries) as well as poured-on bar top and table top applications. Features include low exotherm kick, slow UV epoxy yellowing, and low viscosity, making it suited for poured applications between 1/4 and one inch thick. Bio Clear 810 has a 2:1 mix ratio.

Read More »
Fillers

CalciTech Launches Sustainable Product for Plastics Industry

GENEVA, Switzerland, November 11 / / - CalciTech Ltd. (OTCBB: CLKTF) CalciTech announces today the launch of a new product, CalciRC100S(TM) , for use as a high performance filler in plastics. This new product brings additional benefits over conventional calcium carbonates. For example in PVC profiles, trials with major producers have shown the following benefits: - Improved profile whiteness and...

Read More »
Shrink Sleever/Labeler produces tamper-evident seals.
Sealing Equipment

Shrink Sleever/Labeler produces tamper-evident seals.

Operating at 50-170 cpm, 60 Series Evolution Shrinksealer applies full-height bodysleeves and tamper-evident banding to jars, bottles, and products of all types. Use of 2 servos for product handling and sleeve registration promotes flexibility. Sleeve label can be designed to extend up over cap, with horizontal perforation for consumer tamper evidence, and shrink sleeves can also be applied as...

Read More »
Sealants

Wax Filler produces burnishing and wax pull effects.

FI-22-532, is aqueous wax dispersion suited to both full grain and corrected grain leathers. Filler enhances polishing effect by darkening finish while also adding brightness. Resulting handle is warm, soft, and natural and maintains natural aniline appearance. Creamy white opaque liquid FI-22-532 withstands high temperature plating.

Read More »

All Topics