Silicone PSA has easily removable release liner.
Adhesives

Silicone PSA has easily removable release liner.

Intended for silicone gasket and cushioning pad applications where acrylic adhesive systems cannot be used, DP-1001 polyimide film-supported silicone pressure sensitive adhesive (PSA) features 91 lb poly-coated opaque white release liner designed to facilitate separation from silicone adhesive. This cross-linked silicone adhesive has continuous service from -100 to +500°F and short-term,...

Read More »
Adhesives

Magnum Introduces a Full Line of Pressure Sensitive Adhesives

Magnum Magnetics now offers a full line of rubber, acrylic and foam pressure sensitive adhesives. Our adhesives cover a wide variety of applications from graphic arts, abrasives, automotive, foam fabrication, window and door applications and more. Magnum adhesives are available in rolls from 1/2 (9.5mm) to to 60" (1.5m) wide and a variety of lengths and liner types. Magnum consistently delivers...

Read More »
Photovoltaic Metallization Pastes boost solar cell efficiency.
Photovoltaic Equipment

Photovoltaic Metallization Pastes boost solar cell efficiency.

DuPont(TM) Solamet® PV16x series photovoltaic metallizations are frontside metallization pastes that can raise efficiency of crystalline silicon solar cells by up to 0.4%. Products are capable of contacting shallow emitters of up to 85 W/square as well as deep emitters. Featuring low-contact resistance, they are available in options suitable for various printing requirements, including fine...

Read More »
Resins

Medical Grade Resins are suitable for minimally invasive devices.

Designed for medical device applications, including devices exposed short term to bodily fluids, Pebax® MED resins have passed USP Class VI biocompatibility testing and are sterilizable by EtO, gamma, and steam. Chemistries are also available in breathable films suited for thick coatings or laminates used in level 3 and 4 medical apparel applications, such as surgical gowns, masks, gloves,...

Read More »
Epoxies

Epoxies, Anisotropic Adhesives suit high brightness LED die packaging.

Featuring polymer rheology that maximizes thermal connection and minimizes light loss, MAXIGLOW(TM) 502 conductive silver epoxies are intended for conventional epi-up packaging of LEDs driven at 20 mA. ZTACH(TM) anisotropic conductive adhesives, intended for flip chip packaging of high-power LEDs driven at 350 mA, enables self assembly process that eliminates need for extra processing steps. Both...

Read More »
Adhesives

High Grade Thread Sealants for Every Industry

Anti-Seize Technology produces a complete line of government-and-industry-approved Thread Sealants. Franklin Park, Illinois-Anti-Seize Technology (AST) is a regular player in the industrial chemical industry and has been since their inception in 1971. Along with many other products, AST carries the broadest lines of Thread Sealants including brush-on, PTFE Tapes, and anaerobic threadlockers and...

Read More »
Tamper Evident Tape adheres to stretch-wrapped packages.
Labels

Tamper Evident Tape adheres to stretch-wrapped packages.

Designed for poly-wrapped surfaces, Stretch Wrap Secure is used to identify and provide tamper evidence for stretch wrapped and shrink wrapped pallets, bundles, cartons, containers, and boxes. Stretch Wrap Secure cannot be resealed once opened because security label reveals message OPENED if package is opened and re-seal is attempted. Tape is sequentially numbered every 9 in.

Read More »
Resins

Cereplast Enters Distribution Agreement with Alphani International Co. Ltd. for Bioplastic Resins

Expands the Company's Distribution throughout Southeast Asia EL SEGUNDO, Calif. - June 2, 2010 - Cereplast, Inc. (NASDAQ: CERP), a leading manufacturer of proprietary bio-based, sustainable plastics, announced today that it has entered into an exclusive distribution agreement with Thailand-based Alphani International Co., Ltd. to supply bioplastic resins throughout Southeast Asia. Cereplast's...

Read More »
Single Component Snap Cure Epoxy has Outstanding Electrical Properties and Chemical Resistance
Epoxies

Single Component Snap Cure Epoxy has Outstanding Electrical Properties and Chemical Resistance

HACKENSACK, NJ - Master Bond EP17HT-3 is a one part epoxy that sets up in 20 to 30 seconds and snap cures in only 2 to 3 minutes at 250°F-300ºF. As a one part system, no mixing is required and the epoxy can be cured in sections up to 1/4" thick. Moreover, its working life is indefinite as it will not gel until heated above 200ºF. With a volume resistivity of greater than 1014 ohm-cm,...

Read More »
One Part High Strength Epoxy With High Thermal Conductivity Meets NASA Low Outgassing Specifications
Epoxies

One Part High Strength Epoxy With High Thermal Conductivity Meets NASA Low Outgassing Specifications

HACKENSACK, NJ - Resistance to impact, thermal shock, vibration and stress fatigue cracking is of vital importance in the aerospace, optical, medical and oil/chemical processing industries. Master Bond Polymer Adhesive Supreme 10AOHT-LO is a single component, no mix, thermally conductive compound featuring superior electrical insulation and toughness. It meets NASA low outgassing specifications...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers