Switches

Matrox Mura MPX Series Boards to Drive Eye-Catching Control Room Video Wall in ABB's Automation Arena at ABB Automation & Power World 2012

Mura boards deliver easy-to-use output scaling, switching, and layout management capabilities for collaborative video wall applications Montreal, Canada - Matrox Graphics today announced that Matrox Mura MPX Series video wall controller boards were selected by ABB to drive the video wall for the control room of the future exhibit at ABB Automation and Power World 2012. Showcased in the Automation...

Read More »
Brazing Alloys

Tanaka Kikinzoku Kogyo Starts Providing Active Brazing Filler Metal Able to Directly Bond to Ceramics at Half the Conventional Cost

Tokyo - Tanaka Holdings Co., Ltd. (a company of Tanaka Precious Metals) today announced that Tanaka Kikinzoku Kogyo K.K., which operates the Tanaka Precious Metals' manufacturing business, will start providing TKC-651 active brazing filler metal able to directly bond to ceramics at half the material cost of conventional active brazing filler metals. TKC-651 is an active brazing filler metal...

Read More »
Additives

Dow Corning at ACS 2012: Highlighting Innovative Silicone Solutions for Paints and Inks

Dow Corning to showcase its superwetter, slip and leveling, foam-control, and water-resistance additives and new amino silicone resin for solving formulation challenges MIDLAND, MICHIGAN, USA: Attendees of the American Coatings Show (ACS) 2012, scheduled for May 8 through 10 at the Indiana Convention Center in Indianapolis, Ind., can learn about Dow Corning's effective silicone-based solutions...

Read More »
Resin Outlook for Plastic Injection Molding
Resins

Resin Outlook for Plastic Injection Molding

The trend for pricing for commodity and engineering resins for the first quarter is they are rising. According to an article in Plastics Technology April 2012, this was primarily driven by feedstock cost increases and in some cases resin supply. The following pricing and information was printed in Plastics Technology April 2012 article Commodity & Engineering Resin Prices Climb Higher", written...

Read More »
Spot Curing Conductive Adhesive gels in 5 seconds at 200°C.
Adhesives

Spot Curing Conductive Adhesive gels in 5 seconds at 200°C.

Featuring rubber-like flexibility, DB-1590 serves as solder replacement in crystalline silicon solar modules using thinned silicon and/or plated bus bars. Adhesive gels in 5 seconds or less, developing sufficient strength to withstand stresses induced by manufacturing process until adhesive cure is completed during encapsulant lamination process. Product has optimized rheology for dispensing,...

Read More »
Double-Sided Tape is suitable for sealing, cushioning, and gasketing.
Adhesive Tapes

Double-Sided Tape is suitable for sealing, cushioning, and gasketing.

Comprised of tapes coated with permanent acrylic adhesive with functional range of -20 to +200°F, VF20200 Series features cell structure that resists water absorption while maximizing load bearing capacity. Suited for joining irregular surfaces due to conformable nature, tapes are resistant to degradation and can be die-cut or kiss-cut to custom specifications. Standard rolls come in widths...

Read More »
Versatile, Peelable Masking Resin Simplifies Masking Processes
Resins

Versatile, Peelable Masking Resin Simplifies Masking Processes

Dymax Corporation's SpeedMask® 726-SC is a UV/Visible light-curable masking resin formulated to provide excellent surface protection of turbine engine components, orthopaedic implants, and metal components during plating, plasma spray, blasting, anodizing, and powder-coating processes. Formulated with the patented See-Cure technology, 726-SC starts out bright blue in an uncured state,...

Read More »
High-Temperature Coating seals, protects steel parts/structures.
Sealants

High-Temperature Coating seals, protects steel parts/structures.

Applicable to diverse industries, Corr-Paint(TM) CP4020 single-part, gray-pigmented, silicone-based, water-dispersible coating system adheres to sandblasted as well as marginally prepared surfaces. Coating dries at room temperature and cures as coated structure is ramped up to its operating temperature. At temperatures to 1,100°F, resultant coating is color stable and resistant to...

Read More »
Electrolube Launches Isocyanate-Free Clear Polyester Resin at SMT Hybrid Packaging
Resins

Electrolube Launches Isocyanate-Free Clear Polyester Resin at SMT Hybrid Packaging

Electrolube, the global manufacturer at the forefront of electro-chemicals technology, will launch an innovative clear polyester resin and showcase the company's newest "green" and Silicone Resin products for the electronics, automotive and industrial manufacturing industries, at SMT Hybrid Packaging on the 8-10 May at the Messezentrum in Nuremberg, booth 7-524. The new PE7500 Clear Polyester...

Read More »
Adhesives

Henkel Chipbonder Compatible with Non-Contact Dispensing Technology; Enables Higher Throughput and More Uniform Dot Dimensions

Known worldwide for surface-mount adhesive (SMA) development leadership, Henkel has set the industry benchmark with its high-performance Chipbonder brand adhesives. Within the company's expansive portfolio of SMAs is LOCTITE 3621, which has been validated for use with non-contact dispensing - often referred to as jetting - technologies. This capability makes the SMA even more ideal for...

Read More »

All Topics