Eisertech Achieves FDA Clearance for New Spinal Implants Made of Solvay's Zeniva® PEEK
Resins

Eisertech Achieves FDA Clearance for New Spinal Implants Made of Solvay's Zeniva® PEEK

Thermoplastic Biomaterial Delivers High Performance in Cervical and Lumbar Cages ALPHARETTA, Ga. - Eisertech LLC, a San Diego, Calif. - based designer and manufacturer of cost-effective spinal implants, has received 510(k) clearance from the U.S. Food & Drug Administration (FDA) for its new cervical cage and lumbar cage implants made of Zeniva® polyetheretherketone (PEEK) rods from Solvay...

Read More »
Akulon® Fuel Lock FL40-HP Awarded CARB Executive Order for Use in Small Engine Fuel Tanks
Container Liners

Akulon® Fuel Lock FL40-HP Awarded CARB Executive Order for Use in Small Engine Fuel Tanks

DSM has been awarded the Executive Order (EO) for Akulon® Fuel Lock FL40-HP, a blow moldable, polyamide 6-based mono-material. This award, granted by the California Air Resources Board (CARB), certifies that the material meets the low permeation of hydrocarbons requirements for small, off-road engine fuel tanks. All off-road equipment sold in the state of California must meet stringent...

Read More »
Electrically Conductive Silver Adhesive cures in 45 seconds.
Epoxies

Electrically Conductive Silver Adhesive cures in 45 seconds.

Used for cold soldering and bonding electrical and electronic components where soldering is impractical, Metaduct(TM) 1245 is 100% solid silver adhesive formulated as electrically conductive, 2-part epoxy that cures at room temperature. This solvent-free, non-bleeding, thixotropic, and non-flammable adhesive, able to replace leaded and lead-free hot solder, provides over 600 psi tensile shear...

Read More »
Gaskets

Silicone Extrusions and Tubing are listed to NSF-51.

Designed to resist high temperatures, Silicone Formulations come in silicone tubing for fluid conveyance, custom silicone extrusions for gaskets and seals, and molded silicone products. Compounds are listed to NSF-51, Food Equipment Materials and offer resistance to animal fats and steam exposure, making them suitable for commercial cooking equipment and food holding apparatuses.

Read More »
Molding Services

Ellsworth Adhesives Now Offers Henkel MACROMELT Encapsulants and Contract Overmolding Services

GERMANTOWN, WI - Ellsworth Adhesives has initiated a comprehensive product and service support program for customers requiring high-speed electronic encapsulation, including Henkel MACROMELT low pressure molding encapsulants, Cavist Moldman(TM) molding equipment and contract overmolding services. Ellsworth Adhesives, a leading supplier of Henkel's advanced electronic materials products, now...

Read More »
Epoxy Compound serves potting applications from -67 to 365°F.
Epoxies

Epoxy Compound serves potting applications from -67 to 365°F.

Available for electrical and electronic potting applications, thermally conductive Aremco-Bond(TM) 2318 is medium-viscosity (16,000 cP mixed), black-pigmented epoxy compound with 12,300 psi flexural strength and 1,135 psi tensile-shear strength. Other properties include volume resistivity of 3.0 x 1015, dielectric strength of 460 V/mil, and dielectric constant of 4.8 at 1 kHz. Recommended cure...

Read More »
Adhesive Tapes

Neoprene/EPDM Closed-Cell Foam Tape weatherproofs doors, windows.

Featuring rubber-based, pressure-sensitive adhesive on one side, Soft (P8200), medium (P8100), and firm (p8300) density tapes cushion sound, shock, and vibration while providing tight seal against moisture, dust, and air leaks. Resistance to acids, alkali, ozone, and oxidation promote service longevity, and thicknesses from 1/16-Â-½ in. are available in roll lengths from 25-100 ft....

Read More »
Polyvinyl Chloride (PVC)

High-Flow Rigid PVC Compound is suitable for large, thin-wall parts.

As alternative to engineering thermoplastics, Apex® RM 8911 provides strength and stiffness for large products, such as appliance panels, thin-wall parts, and complex structures, with elaborate flow paths. Chemical-resistant compound produces high-gloss finish and is UL-94 recognized for applications requiring V-0 or 5 VA flammability ratings. Nominal values include specific gravity of...

Read More »
Inflatable Packaging Film optimizes overall sustainability.
Packaging Materials

Inflatable Packaging Film optimizes overall sustainability.

Used on Fill-Air® 2000 and Fill-Air Cyclone® packaging systems, Fill-Air R5® Film creates air-filled cushions for void-fill applications. Film contains minimum of 10% thermoplastic starch resin, which is derived from annually renewable source. Resin also contains minimum of 10% pre-consumer recycled content derived from film manufacturing facilities. In addition to being...

Read More »
Oversized Security Labels have tamper-evident design.
Labels

Oversized Security Labels have tamper-evident design.

Available in red and sequentially numbered, 3 X 9 in. TT self-voiding stocked security labels cannot be resealed. Removal provides physical visual evidence of tampering by revealing VOID OPENED message on surface. Product conforms to irregular surfaces of many materials, including plastic, metal, wood (treated), cardboard, and more, to accommodate various security applications, such as boxes,...

Read More »

All Topics