ECM to Showcase Snap Cure Low-Cost Conductive Adhesives for Interconnecting Solar Cells at Intersolar NA 2012
Adhesives

ECM to Showcase Snap Cure Low-Cost Conductive Adhesives for Interconnecting Solar Cells at Intersolar NA 2012

DELAWARE, OH - Engineered Conductive Materials, LLC, a leading global supplier of conductive interconnect materials for photovoltaic applications, will exhibit the new low temperature curing Conductive Adhesive DB-1541-LTC in North Hall, Booth #5619 at the upcoming Intersolar North America conference and exhibition, scheduled to take place July 10-12, 2012 at the Moscone Center in San Francisco,...

Read More »
Instant Adhesives offer high temperature resistance.
Adhesives

Instant Adhesives offer high temperature resistance.

Surface insensitive Loctite® 401(TM)/406(TM)/454(TM) fixture in 15 sec or less and retain bond strength at operating temperatures to 250°F. Medium-viscosity/general-purpose, water-thin wicking, and non-drip gel formulations are available. Low odor and low bloom Loctite® 403(TM)/408(TM)/455(TM)/460(TM) maintain bond strength in high-humidity environments while delivering...

Read More »
Welding Rods, Wire and Electrodes

Hobart Brothers Receives CE Mark for Additional Filler Metals

TROY, Ohio -- Hobart Brothers announced that has received the CE (ConformitÃ-© Européenne or European Conformity) Mark for two more of its filler metals. The Hobart® TM-881K2 and Hobart TM-791 gas-shielded flux-cored wires in 1.2 mm (.045 inch) diameters now both meet the strict safety and health requirements necessary for them to be sold and used in European Union (EU)...

Read More »
Additives

New Patent for Hallgreen® Modifiers from Hallstar

Chicago - The HallStar Company was awarded U.S. Patent Number 8,158,731, titled Biopolymer Compositions Having Improved Flexibility," from the U.S. Patent and Trademark Office (PTO) on April 17, 2012. The patent applies to novel, bio-based polymeric additives, which are derived from renewable feedstocks and provide unique benefits to biopolymer processors. Of particular note, HALLGREEN R-8010 is...

Read More »
UV Cure Adhesive suits electronics assembly applications.
Epoxies

UV Cure Adhesive suits electronics assembly applications.

Non-conductive 535-10M-1 is flexible epoxy adhesive that suits disk drive, camera module, optoelectronic, and circuit assembly applications. Product is designed to eliminate any crowning (warpage) of sliders in head gimbal assemblies and can be used in other bonding applications in head stack assembly. Also, this antimony-free adhesive can be used for lens bonding in camera modules, chip...

Read More »
Icon Brings New Collaborative Approach to Aerospace Product Development
Sealants

Icon Brings New Collaborative Approach to Aerospace Product Development

Icon Polymer Group, a technology company in engineered polymer products, has developed a new approach to collaboration and product development which is set to bring major benefits for customers in the aerospace sector. The company is delivering product and technological workshops to the sector's major players with the aim of educating customers about the latest developments in materials, polymer...

Read More »
Encapsulants

Flame Retardant Epoxy has single-component formulation.

Suited for semiconductors and transistors, EB-350-3LV exhibits stability at room temperature and accelerated curing at elevated temperatures. Single-component, low-viscosity epoxy encapsulant, with its flame out properties, will meet UL-94VO testing and has glass transition temperature of 140°C. Supplied in pint, quart, and gallons as well as 10 oz Semco cartridges, product withstands...

Read More »
Solar Panels

RenewSys Launches EVA Encapsulant for Photovoltaic Modules at Intersolar North America 2012, Booth No. 5679, Moscone Center, San Francisco, USA

MUMBAI, India, -- RenewSys is a manufacturer of EVA Encapsulant used in Photovoltaic Solar modules. It is the renewable energy division of the flagship company 'Positive Packaging Industries Ltd.', a pioneer in flexible packaging. Positive has operations in India, Nigeria and U.A.E. and is a part of the ENPEE Group, an international conglomerate with over 50 years of business experience. The...

Read More »
Sealing Equipment

Automatic Case Sealer sustains 100 fpm production speed.

Intended for those with high-volume runs of same box size, Little David LD-24 has fully welded frame and positively folds major flaps. Removable crank handles and graduated adjustments, scaled for precise measurement, accelerate box changeover. Along with operator stations on both sides, height-adjustable machine can run both 2 and 3 in. tape and features dual side rear flap tuckers;...

Read More »
Loctite® Liquid Optically Clear Adhesives Advance Touch Panel and Display Assembly
Adhesives

Loctite® Liquid Optically Clear Adhesives Advance Touch Panel and Display Assembly

Dual Cure, Low Shrinkage Technologies Control Mura; General-Purpose LOCAs Absorb Impact, Allow Thinner Designs Rocky Hill, Conn. - As touch panel interfaces become the norm on mobile devices, laptops and tablets, Loctite® Liquid Optically Clear Adhesives (LOCA) from Henkel Corporation are improving the viewing experience, increasing display durability, extending product life, reducing power...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics