Adhesive Tapes

Adhesive Tapes

Adhesive Film suits direct skin application.

Bioflex® Rx607P consists of matte polyethylene film, single-coated with medical-grade, acrylic pressure-sensitive adhesive. It provides conformability for curved areas of body, making is suited for attaching electrodes and other medical devices to skin. Tape is supplied on 61 lb polycoated release liner.

Read More »
Tape makes rivets, screws, and welds obsolete.
Adhesive Tapes

Tape makes rivets, screws, and welds obsolete.

Model 3M(TM) VHB(TM) Tape can join dissimilar materials like plastic and metal, glass and metal, and aluminum and steel. It disperses pressure along entire length of seam, unlike rivet or joint where stress is concentrated in certain points. When bonding 2 unlike materials, it can resist differing co-efficients of thermal expansion. Tape prevents galvanic corrosion between metals and provides...

Read More »
Protective Masking Tape suits wave solder applications.
Adhesive Tapes

Protective Masking Tape suits wave solder applications.

Scapa 653 paper tape is single-coated with modified silicone pressure-sensitive adhesive. During hot air leveling and wave soldering operations, it provides protection against chemical solvents, solder, and rinse water while adhering to electronic substrates. Tape leaves no adhesive residue upon removal and is suited for low static protection of gold finger or rhodium PBC contacts, assembly...

Read More »
Splicing Film withstands 400°F for short periods.
Adhesive Tapes

Splicing Film withstands 400°F for short periods.

Scapa 512 pressure-sensitive splicing tape consists of polyester film, single-coated with silicone adhesive for use on silicone and other surfaces. Product can withstand prolonged exposure to temperatures as high as 350°F; for shorter periods of time, Scapa 512 withstands temperatures up to 400°F.

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Printer Tapes are designed for low-light signage.
Adhesive Tapes

Printer Tapes are designed for low-light signage.

Used with GlobalMark(TM), PowerMark(TM), HandiMark®, and Labelizer® Plus products, reflective tapes are visible with flashlight or vehicle headlights and suited for low light conditions. Phosphorescent, Glow-In-The-Dark tapes glow for 10 hours and meet ISO, dIN and ASTM standards. Chemically-resistant tag stock meets OSHA 50 lb pull requirement and is suited for lockout and accident...

Read More »
Double-Sided Tapes suit touch screen assembly applications.
Adhesive Tapes

Double-Sided Tapes suit touch screen assembly applications.

ARclean® 90178 and 90176 are 0.0035 and 0.005 in. thick non-corrosive tapes that provide perimeter spacer bonding in resistive touch screen and other similar electronic devices. They utilize electronically-clean, acrylic acid-free adhesive, and have low outgassing of VOCs. Tapes offer resistance to aging with ability to withstand temperature and humidity extremes. Both have polyester film...

Read More »
Wire Harness Tape reduces squeaks and resists abrasion.
Adhesive Tapes

Wire Harness Tape reduces squeaks and resists abrasion.

Tyco Polyken® 007 consists of non-woven polyester backing on black natural rubber adhesive that is single-coated, self-wound, and provides consistent unwind throughout roll. Conformable and abrasion-resistant product, non-corrosive to copper wire, measures 11 mil thick and Â-¾ in. wide and has 20 lb/in. tensile strength. Applications include spot taping, clip retention, or continuous...

Read More »
Adhesive Tapes

Polyethylene Film Tape works in extreme environments.

Clear, low-density Scapa P933A bonds to common industrial substrates and withstands environmental extremes. It is single-coated with acrylic adhesive formulated to provide high tack, quick stick, and peel strength, while offering humidity, water, and chemical resistance. Able to adhere to metals and engineering plastics, tape features release top-coat that allows film to be converted into...

Read More »
Automotive Wire Harness Tape facilitates recycling.
Adhesive Tapes

Automotive Wire Harness Tape facilitates recycling.

Halogen-free, environmentally compliant Autolon® 824 looks and feels like PVC but emits no toxins during combustion. Harnessing tape consists of polyolefin film single-coated with synthetic rubber pressure-sensitive adhesive. It provides solution for wire harness wrapping, clip retention, and color code identification; offers fogging number from 70-95; withstands temperatures to 85°C;...

Read More »
Adhesive Tape suits direct skin applications.
Adhesive Tapes

Adhesive Tape suits direct skin applications.

Woven-fabric Bioflex® Rx632P offers conformability for curved areas of body and suits roll-form and specialized bandage application. Tape consists of tan, woven fabric, single coated with medical-grade acrylic. Pressure-sensitive adhesive removes cleanly without causing skin trauma and is supplied on 42# kraft release liner to allow easy die cutting.

Read More »

All Topics