Additive Manufacturing

Resins

RedEye RPM Adds Options to its Rapid Prototyping Services

September 25, 2007 VeroWhite and VeroBlack join VeroBlue- materials that provide accurate depictions of the end result projects Eden Prairie, Minn. (Sept. 25, 2007) - RedEye RPM today announced the general availability of VeroWhite and VeroBlack, and the availability of VeroBlue for its Overnight Build premium service. The addition of VeroWhite and VeroBlue to our already extensive list of...

Read More »
Additive Manufacturing

Objet to Debut Industry's First Multi-Material 3-D Printer, Show Range of Solutions, at EuroMold 2007

REHOVOT, Israel, November 29 -- Objet Geometries Ltd., the world leader in ultra-thin layer photopolymer jetting, today announced that the international debut of its Connex500(TM) 3-D Printing System and PolyJet Matrix(TM) Technology will take place at the EuroMold 2007 show in Frankfurt, Germany. The revolutionary Connex500, which is the first system capable of printing parts and assemblies made...

Read More »
Casting Services

austriamicrosystems Expands CMOS, High-Voltage, High-Voltage Flash and RF Multi Project Wafer Service for Foundry Customers

More extensive prototyping schedule for High-Voltage CMOS, High-Voltage CMOS Embedded Flash, SiGe- BiCMOS and CMOS specialty processes Unterpremstaetten, Austria (November 15, 2007) - austriamicrosystems' business unit Full Service Foundry expands its cost-efficient and speedy ASIC prototyping service, known as Multi-Project Wafer (MPW) or shuttle run, with a more extensive schedule for 2008. The...

Read More »
Resins

DSM Somos Introduces WaterClear Ultra-the Clearest SL Resin Currently Available

Building on their patented clear resin technology, leading rapid prototyping resin innovator DSM Somos® has announced the commercial availability of WaterClear® Ultra, a highly clear, colorless stereolithography (SL) resin. In color comparison testing, WaterClear Ultra has been shown to be the clearest SL resin available on the market today. Using a colorimeter (an instrument used to measure...

Read More »
Vat Photopolymerization Systems

DSM Somos® DMX-SLT 100 Draws a Crowd at TCT's Rapid Product Development and Manufacturing Event

Six months after its market introduction, DSM Somos' high-impact SL resin innovation, DMX-SL 100 is still drawing crowds-this time at Time Compression Technologies' UK Rapid Product Development and Rapid Manufacturing Event, held on September 26-27. With over 2,000 worldwide visitors and more than 100 exhibits, the show is now considered the United Kingdom's leading conference and...

Read More »
Printers

Objet Will Participate in the Upcoming SIGGRAPH 2007

Billerica, MA, - August 5th, 2007 - Objet Geometries Ltd., www.2objet.com the world leader in ultra-thin layer photopolymer jetting, today announced it will participate in the upcoming SIGGRAPH 2007 Conference at the San Diego Convention Center, August 7-9th (Booth #1828). Objet will demonstrate its Eden260(TM) 3-Dimensional Printing System, enabling SIGGRAPH users to see first-hand how the...

Read More »
Prototyping Systems

Israel Aerospace Industries Acquires 2 Eden500V(TM) 3D Printing Systems

August 12, 2007 Rehovot, Israel - 12 August, 2007 - Objet Geometries Ltd., the world leader in ultra-thin layer photopolymer jetting, and Israel Aerospace Industries (IAI; formerly Israel Aircraft Industries), today announced that IAI has purchased two Eden500V(TM) 3-Dimensional Printing Systems, bringing high-accuracy, high-performance modeling capabilities right into the hands of IAI's in-house...

Read More »
Miscellaneous Manufacturing Services

EOS to Showcase E-Manufacturing at K 2007 Trade Fair

Krailling, Germany - August 10th, 2007 - EOS, the world-wide leading manufacturer of laser-sintering systems, announced that it will exhibit at K 2007, the international plastics and rubber trade fair, which will be held in Dsseldorf, Germany from October 24th to 31st. The company will showcase its two e-Manufacturing solutions for rapid, flexible production of plastic components-EOSINT P for...

Read More »
Printing Software

Xtreme Graphics & Virtual Images Unlimited Premiered INFINIDEPTH(TM) Print Technology at the National Restaurant Association Show

CHICAGO, May 23 /-- Xtreme Graphics, with sister company Virtual Images Unlimited (VIU), premiered a revolutionary printing technology, INFINIDEPTH(TM) at the National Restaurant Association (NRA) show at booth 7748. Xtreme Graphics & VIU displayed several examples of the patent pending INFINIDEPTH(TM) print technology, including large format printed displays and smaller promotional pieces....

Read More »
Miscellaneous Software

Announcing form.Z RenderZone Plus (v. 6.5)

AutoDesSys, Inc., is pleased to announce the release of form.Z RenderZone Plus (v. 6.5) for User Beta testing. RenderZone Plus is a new product that represents a major evolutionary step toward global illumination, which is now supported by different techniques, including final gather, ambient occlusion, and improved radiosity. These can be used separately or they can be combined to complement one...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers