New Motorized Lead Screw Actuators are Offered in NEMA-Standard Bolt-Hole Patterns
The Motorized Lead Screw Actuators are designed for force-sensitive applications that require stroke length shorter than 2.5 in., loads less than 200 lb and speeds below 20 in/s. The units are offered for NEMA 8, 11, 14, 17 and 23 motor frame sizes in single or double stacks. The actuators offer resolutions ranging from 0.063 to 7.5 µin of linear travel per step. They are used in adjustment of...
Read More »
Latest AC-EM 10 Electronic Actuator Can be Used to Remotely Actuate Mechanical Latch
Southco’s AC-EM 10 Electronic Actuator is designed to accommodate higher mechanical loads and facilitates actuation of R4-10 Rotary latch series. The unit is suitable for concealed applications and is used to remotely actuate locks and latches. AC-EM 10 unit is tested to IP55 water and dust protection standards.
Read More »
Latest AC-EM 10 Electronic Actuator Can be Used to Remotely Actuate Mechanical Latch
Southco’s AC-EM 10 Electronic Actuator is designed to accommodate higher mechanical loads and facilitates actuation of R4-10 Rotary latch series. The unit is suitable for concealed applications and is used to remotely actuate locks and latches. AC-EM 10 unit is tested to IP55 water and dust protection standards.
Read More »
New Super-Flat Actuators are Offered in 24VDC and 48VDC Versions for Battery-Powered Applications
Harmonic’s FLA Series Super-Flat Actuators are suitable for AGV wheel drives and powered exoskeleton applications. The units are offered in three sizes, multiple ratios and two voltages. The actuators are available with Harmonic Planetary® gearhead or Harmonic Drive® reducer with 8:1 and 9:1 ratios and 50:1 or 100:1 ratios respectively.
Read More »
What You Need to Know About Adhesive N-95 Respirators
This white paper provides an in-depth overview of what you need to know about adhesive N-95 respirators.
Read More »
New Super-Flat Actuators are Offered in 24VDC and 48VDC Versions for Battery-Powered Applications
Harmonic’s FLA Series Super-Flat Actuators are suitable for AGV wheel drives and powered exoskeleton applications. The units are offered in three sizes, multiple ratios and two voltages. The actuators are available with Harmonic Planetary® gearhead or Harmonic Drive® reducer with 8:1 and 9:1 ratios and 50:1 or 100:1 ratios respectively.
Read More »
New Ecomag Linear Actuators Deliver Positioning Speeds up to 13 mm/s
SKF’s Ecomag Linear Actuators are available in push models ECO 2/4 and ECO 6/8 and push/pull models ECO 3/5 and ECO 7/9 models. Units offer push-load and pull-load force of up to 6000 N and 4000 N respectively. Having strokes up to 300 mm, actuators feature built-in limit switches. Ecomag actuators are fully tested UL standards and are suitable for use in hospitals, diagnostic centers, and...
Read More »
New Ecomag Linear Actuators Deliver Positioning Speeds up to 13 mm/s
SKF’s Ecomag Linear Actuators are available in push models ECO 2/4 and ECO 6/8 and push/pull models ECO 3/5 and ECO 7/9 models. Units offer push-load and pull-load force of up to 6000 N and 4000 N respectively. Having strokes up to 300 mm, actuators feature built-in limit switches. Ecomag actuators are fully tested UL standards and are suitable for use in hospitals, diagnostic centers, and...
Read More »
New Rotary Voice Coil Actuators Feature Moving Coil Design
H2W’s TWR-015-346-2RC High Torque Rotary Coil Actuators deliver a continuous torque 1.29 N-m and peak torque of 3.88 N-m at a duty cycle of 10%. Units generate a total angular displacement of 15° and motor constant of 0.24 N-m/sqrt(watt) per coil and a 0.34 N-m/sqrt(watt) when coupled together. Actuator’s moving coil design provides hysteresis free movement and ripple-free motion. Unit can...
Read More »
New Electric Failsafe Actuators are Offered with Internal Battery Backup
HRS Series Electric Failsafe Actuators are available in HRS2, HRSN3 and HRSN4 models with up to 440 in-lbs, 1770 in-lbs and 8850 in-lbs torque. Units are offered as stand-alone 24VAC/VDC units or proportional modes and come with internal battery backup and supercapacitor reserve power supplies. The actuators are equipped with 2x volt-free Form A Auxiliary switches and ISO5211 compliant mounting...
Read More »
New Electric Failsafe Actuators are Offered with Internal Battery Backup
HRS Series Electric Failsafe Actuators are available in HRS2, HRSN3 and HRSN4 models with up to 440 in-lbs, 1770 in-lbs and 8850 in-lbs torque. Units are offered as stand-alone 24VAC/VDC units or proportional modes and come with internal battery backup and supercapacitor reserve power supplies. The actuators are equipped with 2x volt-free Form A Auxiliary switches and ISO5211 compliant mounting...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
