Linear Actuators are available with die-cast housing.
Actuators

Linear Actuators are available with die-cast housing.

Macron 14 line of belt-driven linear actuators are offered with die-cast housing for both idler and drive end pulley assemblies. Allowing for increased load carrying capability in vertical orientation applications, design allows for addition of 2 radial bearings on idler assembly and 1 additional bearing on drive end. Actuators support motion up to 400 ips and are also available in lengths up to...

Read More »
Electric Actuators offer single and double guides.
Actuators

Electric Actuators offer single and double guides.

Featuring short body design for narrow locations, RCP2/RCA-SRA Series is available with pulse type motor for push force and low-speed raising and lowering operations, as well as servo motor for stable transportation during high-speed operations. Guides can be selected if load is applied to end of rod, or if straight motion is required. Providing 5 installation surfaces, actuators are available...

Read More »
Electric Actuators offer single and double guides.
Actuators

Electric Actuators offer single and double guides.

Featuring short body design for narrow locations, RCP2/RCA-SRA Series is available with pulse type motor for push force and low-speed raising and lowering operations, as well as servo motor for stable transportation during high-speed operations. Guides can be selected if load is applied to end of rod, or if straight motion is required. Providing 5 installation surfaces, actuators are available...

Read More »
Linear Servo Slider Actuator installs in narrow spaces.
Electric Linear Actuators

Linear Servo Slider Actuator installs in narrow spaces.

Measuring 20 mm wide, ROBO Cylinder Micro Slider RCL-SA operates at max acceleration of 2 G and max speed of 600 mm/s. Sine-wave drive with 3-phase coil eliminates cogging, while built-in encoder enables actuator to perform positioning to maximum of 512 points when combined with ACON controller. Linear motor method, which has no rotational speed reduction mechanism, minimizes slider size while...

Read More »
Linear Servo Slider Actuator installs in narrow spaces.
Electric Linear Actuators

Linear Servo Slider Actuator installs in narrow spaces.

Measuring 20 mm wide, ROBO Cylinder Micro Slider RCL-SA operates at max acceleration of 2 G and max speed of 600 mm/s. Sine-wave drive with 3-phase coil eliminates cogging, while built-in encoder enables actuator to perform positioning to maximum of 512 points when combined with ACON controller. Linear motor method, which has no rotational speed reduction mechanism, minimizes slider size while...

Read More »
Spindle Actuators are powered with 24 Vdc motor.
Electric Linear Actuators

Spindle Actuators are powered with 24 Vdc motor.

Designed for small load capacities and low cycles, spindle actuators feature strokes up to 1,500 mm, push/pull force of 5,660 N, and speed of 25 mm/sec. They have electronic controlled emergency stop, anodized aluminum housing, and pushrod made of either aluminum or steel. With fully adjustable mounting, units are suited for lifting or pulling loads in environments with no space constraints....

Read More »
Spindle Actuators are powered with 24 Vdc motor.
Electric Linear Actuators

Spindle Actuators are powered with 24 Vdc motor.

Designed for small load capacities and low cycles, spindle actuators feature strokes up to 1,500 mm, push/pull force of 5,660 N, and speed of 25 mm/sec. They have electronic controlled emergency stop, anodized aluminum housing, and pushrod made of either aluminum or steel. With fully adjustable mounting, units are suited for lifting or pulling loads in environments with no space constraints....

Read More »
Alabama Power Upgrades 90 Damper Drives on Two 720-MW Generators
Gearheads and Gearboxes

Alabama Power Upgrades 90 Damper Drives on Two 720-MW Generators

Replacing vintage actuators with new smart" electric drives eliminates high maintenance costs and offers large fuel savings on coal-fired boilers Warminster, PA, -- Alabama Power has modernized drives for most major air dampers on two, coal-fired generating units -- 90 drives in all. Installations took place at the company's 25-year old, James H. Miller, Jr. plant near West Jefferson, AL. Each...

Read More »
Alabama Power Upgrades 90 Damper Drives on Two 720-MW Generators
Gearheads and Gearboxes

Alabama Power Upgrades 90 Damper Drives on Two 720-MW Generators

Replacing vintage actuators with new smart" electric drives eliminates high maintenance costs and offers large fuel savings on coal-fired boilers Warminster, PA, -- Alabama Power has modernized drives for most major air dampers on two, coal-fired generating units -- 90 drives in all. Installations took place at the company's 25-year old, James H. Miller, Jr. plant near West Jefferson, AL. Each...

Read More »
Linear Actuators have low-profile narrow positioning stages.
Actuators

Linear Actuators have low-profile narrow positioning stages.

Model LSMA-175 precision linear actuators feature compact, fully-enclosed stages that measure 25 x 50 mm. Stages have travel ranges between 50 and 200 mm, with positioning repeatability of 0.31 micron, and maximum speed of 10 mm/sec with 8 kg payload. Micrometer-grade screw with lead pitch of 0.5 mm, miniature linear bearing, and non-contact limit switches with stepper or DC servo motor are...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics