Distributed Power Systems have high-density design.
Featuring active power factor correction, ac-dc distributed bulk power front-ends in DS Series accept ac input from 90-264 Vac and provide +12 Vdc main output and +3.3 Vdc standby output. Power supplies, available with power ratings of 450 and 550 W, have 1U x 2U profile and high-density (greater than 10 W/in.-³) design. Internally fan-cooled units feature full current-sharing capabilities,...
Read More »
AC/DC Front-End Power Supply produces 13 W/in.³.
Suited for equipment with distributed power architecture, DPS2000 adheres to SSI guidelines. Rated at 2,000 W, 48 V unit features active current sharing, hot-swap capabilities, N+1 redundancy, and I2C interface. Power-factor corrected unit meets EMI Class B regulations, measures 12.80 x 2.74 x 4.86 in., and is upgradeable via flash memory. With full load efficiency of 87%, it delivers 1,000 W at...
Read More »
Orbital Welding Power Supply uses inverter technology.
Compact, water-cooled ORBIMAT 165C can be used to control welding heads that are capable of cutting 3-275 mm OD tubes, pipes, and fittings. Full package, consisting of controller, power supply, and cooling unit, weighs 24 kg with full coolant level. Inverter technology throughout machine enables it to work with any input voltage from 80-260 Vdc, while Compact Flash port on front panel allows...
Read More »MIG Welder features multi-voltage power cord.
Able to connect to 115 and 230 V power receptacles, Millermatic-® DVI (Dual Voltage Input) MIG welding power source has 30-175 A operating range. It outputs 90 A @ 20% duty cycle while operating on 115 V and 150 A @ 40% while operating on 230 V. Unit utilizes dual-gear-driven, cast aluminum drive system and comes with power source, M-10 gun and cable assembly, 10 ft work cable and clamp, dual...
Read More »
The Real Cost of Falls and Other Workplace Injuries
When it comes to workplace falls and accidents: inattention to problematic situations and the lack of an appropriate safety plan will cost you on multiple fronts. Our guide covers all the areas of concern to make sure you're protected against risk.
Read More »Switching AC/DC Power Supply generates nominal 60 W.
Industrial grade, 1U MPI-806H generates 80 watts with 8.6 cfm forced air, offers remote ON/OFF function, and is fully protected against output overload and short circuit. Able to automatically recover upon overload condition, unit has MTBF of greater than 130,000 hr. Power supply, which is suited for embedded system and mini ATX motherboard applications, also provides ATX output option and...
Read More »
AC/DC, TIG/Stick Power Sources have integrated cooler.
To prevent torch damage by monitoring coolant flow and temperature, Syncrowave-® 250 DX and 350 LX incorporate Cool-On-Demand(TM) feature. Syncro-Start(TM) technology provides choice of 3 starting conditions to optimize starts to match tungsten diameter and material thickness. Power sources, with welding ranges of 3-310 A and 3-400 A, also incorporate built-in consumables storage drawer, cable...
Read More »
AC/DC Welder offers 250 A output.
Ranger(TM) GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects Kohler-® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and...
Read More »
Orbital Welding Power Supply suits cleanroom applications.
Rated at 160 A, ORBIMAT 160CR features anodized aluminum panels, which eliminate risk of shedding from painted panels, keeping contamination to minimum. It includes automatic welding parameter generation facility and is capable of holding 2,000 four-level welding procedures. Each procedure incorporates Application Specification section that allows for storage of details of gas types and flow...
Read More »
Welding Power Supply welds aluminum components.
Orbimat 300 AC welds with either ac or dc, allowing orbital technique to be used for welding aluminum parts. Since ac balance and frequency can be controlled, operator can manipulate weld bead profile to suit application. Power supply works with any weld head from Orbimatic range, providing capabilities from 1.66 mm to 10 in. OD.
Read More »Welding System uses digital communication protocol.
Multi-process Power Wave-® 355M power source, with Power Feed(TM) 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink-® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5-425 A. Unit comes factory...
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
