AC to DC Power Supplies

Portable Inverter suits TIG welding applications.
AC to DC Power Supplies

Portable Inverter suits TIG welding applications.

Pro-Wave(TM) 300GTSW AC/DC inverter offers full range capability from 300 to 5 amps. It includes Smart Logic(R) input voltage protection, Easy Link flip-of-a-switch voltage selection, and electronic input circuit protector. Inverter produces 200 A output from 50 A of single phase, 230 Vac input. Spot timer ranges from 0.5 to 5.5 sec, and pulse control ranges from 0.5 to 500 pps. Hot start stick,...

Read More »
AC/DC Power Supplies have 0 to 50 deg C operating range.
AC to DC Power Supplies

AC/DC Power Supplies have 0 to 50 deg C operating range.

DMS-PS-CM Series AC/DC instrumentation power supplies accept universal AC inputs (85 to 264 Vac @ 47 to 63 Hz) and deliver 5, 12, and/or 24 Vdc outputs from single, dual, or triple-output configurations. They offer output noise rated to 40 mVp-p on main output and 8 mVp-p on auxiliary outputs. Supplies feature built-in line fuses and on-board LED indicators. Hold-up time with 120 Vac input is 20...

Read More »
Welding Power Source integrates with robotic controllers.
AC to DC Power Supplies

Welding Power Source integrates with robotic controllers.

Power Wave(TM) F355i multi-process, digitally controlled, inverter power source is packaged for use with Fanuc(R) RJ3i and later robotic controllers. Providing 350 amps at 60% duty cycle, unit is capable of GMAW pulse, Synergic GMAW, GMAW (short arc and spray), and FCAW procedures. It can handle high output applications while producing precise welds. F355i is packaged with Power Feed 10R or...

Read More »
AC to DC Power Supplies

Power Supplies meet FCC and EN Class B standards.

RKW 1500 Watt series single output, low noise power supplies provide 3.3 to 48 Vdc outputs from 85 to 264 Vac with power factor correction. Conducted and radiated emissions are suppressed to meet FCC Class B, VCCI Class B, EN 55011-B and EN 5022-B limits with external ac filter. Without filter, supplies meet Class A standards. Supplies have remote on-off voltage control and current balance...

Read More »
AC to DC Power Supplies

Welding Inverter communicates internally via DeviceNET(TM).

PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...

Read More »
Stick/TIG Inverter provides simple operation.
AC to DC Power Supplies

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

Read More »
Switching Power Supply offers high efficiency in small package.
AC to DC Power Supplies

Switching Power Supply offers high efficiency in small package.

Rated at 130W, AC/DC Model AAD130 offers 83% efficiency, and measures only 1.25 x 3.0 x 5.0 in. With 4 outputs, power-factor-corrected switching power supply features current sharing between outputs of similar units. AAD130 is capable of correcting input waveform to better than 0.98 power factor at full load between 90 and 264 Vac input. It meets IEC1000-3-2 harmonic distortion specifications and...

Read More »
Inverter powers arc-welding systems.
AC to DC Power Supplies

Inverter powers arc-welding systems.

Power-Master(R) 500P, with 560 A dc output, is suitable for most welding applications. 24 factory-preset pulse programs facilitate matching size and type of wire to pulse welding applications. Programs are available for mild steel, stainless steel, aluminum, nickel alloys, and silicon bronze. Inverter switches between weld processes, such as gas tungsten, shielded metal, gas metal, and pulsed gas...

Read More »
Welding Power Source communicates via Ethernet.
AC to DC Power Supplies

Welding Power Source communicates via Ethernet.

Suitable for robotic applications, Power Wave 655R has Ethernet, ArcLink and DeviceNet protocols, giving user ability to monitor, control and troubleshoot from remote location. Its digital controls also can connect seamlessly to robot controllers and hard automation PLCs. Inverter has high amperage capabilities for high deposition requirements, Tandem MIG configurations, or heavy gauge materials...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers