AC to DC Power Supplies

Power Supplies offer up to 750 W of power.
AC to DC Power Supplies

Power Supplies offer up to 750 W of power.

AS5 and AC7 Series modular ac to dc switching power supplies feature universal input of 90-264 Vac. Modules range from 2-48 V. Up to 6 individual modules fit in single enclosure providing up to 12 outputs (6 single outputs or 12 outputs when dual modules used). Each module is isolated and can be connected together in several ways to get required output. Power supplies include load sharing, active...

Read More »
Switching Power Supply is fully enclosed.
AC to DC Power Supplies

Switching Power Supply is fully enclosed.

SCN-Series provides output power over 600 to 2,000 W range. Series accepts input from 90 to 260 Vac and 23 models provide single outputs from 5 to 48 Vdc. Soft-start circuitry, remote sense and control functions, and integral EMI filtering are standard. SCN-Series has integral power-good LED indicator and output adjustment potentiometer. It operates over ambient temperature range of 0 to...

Read More »
Switching Power Supplies provide 25 to 320 watts output.
AC to DC Power Supplies

Switching Power Supplies provide 25 to 320 watts output.

A Series enclosed AD/DC power supplies accept universal input from 85 to 265 Vac. Models provide single/dual/triple/quad outputs from 5 to 48 Vdc. All have soft-start circuitry, integral EMI filtering, power-good LED indicator, and output adjustment potentiometer. Units operate over ambient temperature range of -10 to 60 deg C, and include overvoltage and short circuit protection.

Read More »
Alternator provides power for stick welding.
AC to DC Power Supplies

Alternator provides power for stick welding.

Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...

Read More »
Portable DC Inverter offers constant-current output.
AC to DC Power Supplies

Portable DC Inverter offers constant-current output.

Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...

Read More »
Portable Inverter suits TIG welding applications.
AC to DC Power Supplies

Portable Inverter suits TIG welding applications.

Pro-Wave(TM) 300GTSW AC/DC inverter offers full range capability from 300 to 5 amps. It includes Smart Logic(R) input voltage protection, Easy Link flip-of-a-switch voltage selection, and electronic input circuit protector. Inverter produces 200 A output from 50 A of single phase, 230 Vac input. Spot timer ranges from 0.5 to 5.5 sec, and pulse control ranges from 0.5 to 500 pps. Hot start stick,...

Read More »
AC/DC Power Supplies have 0 to 50 deg C operating range.
AC to DC Power Supplies

AC/DC Power Supplies have 0 to 50 deg C operating range.

DMS-PS-CM Series AC/DC instrumentation power supplies accept universal AC inputs (85 to 264 Vac @ 47 to 63 Hz) and deliver 5, 12, and/or 24 Vdc outputs from single, dual, or triple-output configurations. They offer output noise rated to 40 mVp-p on main output and 8 mVp-p on auxiliary outputs. Supplies feature built-in line fuses and on-board LED indicators. Hold-up time with 120 Vac input is 20...

Read More »
Welding Power Source integrates with robotic controllers.
AC to DC Power Supplies

Welding Power Source integrates with robotic controllers.

Power Wave(TM) F355i multi-process, digitally controlled, inverter power source is packaged for use with Fanuc(R) RJ3i and later robotic controllers. Providing 350 amps at 60% duty cycle, unit is capable of GMAW pulse, Synergic GMAW, GMAW (short arc and spray), and FCAW procedures. It can handle high output applications while producing precise welds. F355i is packaged with Power Feed 10R or...

Read More »
AC to DC Power Supplies

Power Supplies meet FCC and EN Class B standards.

RKW 1500 Watt series single output, low noise power supplies provide 3.3 to 48 Vdc outputs from 85 to 264 Vac with power factor correction. Conducted and radiated emissions are suppressed to meet FCC Class B, VCCI Class B, EN 55011-B and EN 5022-B limits with external ac filter. Without filter, supplies meet Class A standards. Supplies have remote on-off voltage control and current balance...

Read More »
AC to DC Power Supplies

Welding Inverter communicates internally via DeviceNET(TM).

PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics