AC to DC Power Supplies

AC/DC Welder offers 250 A output.
AC to DC Power Supplies

AC/DC Welder offers 250 A output.

Ranger(TM) GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects Kohler® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and...

Read More »
Orbital Welding Power Supply suits cleanroom applications.
AC to DC Power Supplies

Orbital Welding Power Supply suits cleanroom applications.

Rated at 160 A, ORBIMAT 160CR features anodized aluminum panels, which eliminate risk of shedding from painted panels, keeping contamination to minimum. It includes automatic welding parameter generation facility and is capable of holding 2,000 four-level welding procedures. Each procedure incorporates Application Specification section that allows for storage of details of gas types and flow...

Read More »
Welding Power Supply welds aluminum components.
AC to DC Power Supplies

Welding Power Supply welds aluminum components.

Orbimat 300 AC welds with either ac or dc, allowing orbital technique to be used for welding aluminum parts. Since ac balance and frequency can be controlled, operator can manipulate weld bead profile to suit application. Power supply works with any weld head from Orbimatic range, providing capabilities from 1.66 mm to 10 in. OD.

Read More »
AC to DC Power Supplies

Welding System uses digital communication protocol.

Multi-process Power Wave® 355M power source, with Power Feed(TM) 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5-425 A. Unit comes factory...

Read More »
Multi-MIG Welding Inverters monitor arc conditions.
AC to DC Power Supplies

Multi-MIG Welding Inverters monitor arc conditions.

Software-driven, Axcess(TM) 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10-44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190-630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through...

Read More »
Power and Output Converter works with dc sensors.
AC to DC Power Supplies

Power and Output Converter works with dc sensors.

Python Power(TM) allows dc sensor to be installed in locations where only ac power is available and maximizes installation efficiency. It consists of universal in-line ac/dc power supply and TRIAC output switch, which is controlled by sensor's low-voltage output and automatically detects sinking or sourcing output. Design accepts universal input voltages from 85-265 Vac and can be pulled through...

Read More »
Multiprocess Inverter utilizes Auto-Line(TM) technology.
AC to DC Power Supplies

Multiprocess Inverter utilizes Auto-Line(TM) technology.

Weighing 80 lb, XMT® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Line(TM) primary power management technology, 5-425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance...

Read More »
AC to DC Power Supplies

Inverter powers ac/dc submerged arc welding.

Rated at 1,000 A, Power Wave AC/DC 1000 inverter is capable of driving welding arcs singularly or in parallel. Each unit achieves 95% power factor with 86% efficiency and produces variable ac as well as straight dc+ or dc- output. Utilizing Nextweld(TM) Waveform Control Technology(TM), modular, software-controlled inverter is designed for use with digital communications. Its ac waveform operates...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers