AC to DC Power Supplies

AC to DC Power Supplies

AC/DC Switching Power Supply has fanless design.

Designed with universal input and active PFC, MPI-815H utilizes U channel chassis design and can generate 150 W @ 50°C under convectional cooling. Output overload, short circuit, and thermal protection are included, along with ATX output option, power good/power fail signals, remote ON/OFF function, and screw terminal I/O connections. Product can be used in no-noise industrial control...

Read More »
AC-DC Power Supplies suit distributed power applications.
AC to DC Power Supplies

AC-DC Power Supplies suit distributed power applications.

Housed in 4 x 7 x 1.5 in. package for 1U-high rack installation, Series NLP250 provides 12, 24, or 48 V outputs, as well as auxiliary, always-on 5 Vdc output. Employing switch-mode technology, units feature power density of 6.0 W per cu-in. Main output channel can deliver 175 W continuously under free air convection conditions, rising to 250 W with 200 lfm forced air cooling. All models have...

Read More »
AC to DC Power Supplies

AC/DC and DC/DC Power Supply mounts in VME or VXI system.

Generating up to 500 W at full load over operating temperature of -55 to +85°C, Model 57S81 provides 5 outputs for VME system or 8 outputs for VXI system. It features baseplate conduction cooled design and is manufactured to NAVMAT component derating guidelines. Operating from 115/230 Vac single-phase or 270 Vdc, unit provides outputs of +5, +3.3, and ±12 Vdc with +5 Vdc standby for...

Read More »
Switching Power Supply Series has 2 x 4 in footprint.
AC to DC Power Supplies

Switching Power Supply Series has 2 x 4 in footprint.

Internal AC/DC switching power supplies in LPS50 series feature overload, over-voltage, short circuit, and thermal protection as well as built-in Class B EMI filtering. Accepting universal input of 127-300 Vdc or 90-264 Vac, products deliver 55 W of total power @ 5 Vdc or 60 W @ 12, 15, 24, or 48 Vdc. Used to power telecommunications, networking, test, measurement, and imaging devices, they are...

Read More »
Switching Power Supply withstands harsh environments.
AC to DC Power Supplies

Switching Power Supply withstands harsh environments.

RHINO(TM) PSM series switching power supplies are available in 12 or 24 Vdc models with power ratings from 78-600 W and up to 25 A output current. Two diagnostic outputs monitor low output voltage levels, allowing for remote notification to a PLC, SCADA, or MMS. RHINO PSM power supplies also include multiple output terminals to enable wiring in parallel load configurations, dual status indicator...

Read More »
Power Supply suits welding applications to 500 W.
AC to DC Power Supplies

Power Supply suits welding applications to 500 W.

Connected directly to 2000 Series hand-held welding devices, 2000LP Ultrasonic System is configurable to run in automation and features digital LED read out and process controls. Visual, audible, and logic alarms provide continuous monitoring, while closed loop amplitude control ensures constant power and consistency in welding cycle. Available in 20, 30, and 40 kHz frequencies, product offers 5...

Read More »
Switching Power Supplies have 25-150 W output range.
AC to DC Power Supplies

Switching Power Supplies have 25-150 W output range.

NextGen Series enclosed AC/DC switching power supplies accept universal input from 85-265 Vac, and 90 models are available that provide Single/Dual/Triple/Quad outputs from 3.3-48 Vdc. Dual outputs offer shared common ground configuration or separate common returns for each output, depending on model. Featuring SMT construction and 105°C electrolytic capacitors, series offers power...

Read More »
Power Supplies are ruggedized for industrial applications.
AC to DC Power Supplies

Power Supplies are ruggedized for industrial applications.

Packaged in UL-approved fiberglass housing, PSA Series encapsulated, PCB-mount switching ac/dc power supplies feature regulated outputs, continuous short circuit protection, and operating range from -25 to +71°C. Products accept universal input of 90-260 Vac and are capable of delivering choice of single, dual, or triple outputs of 3.3, 5, 12, 15, or 24 Vdc. Depending upon model, series...

Read More »
AC to DC Power Supplies

AC/DC Power Supply fits in standard 6U VME rack.

Model 56SQ1 provides 430 W of output power at full load with operating temperature of -55 to +85°C measured at baseplate/wedgelocks. Universal input operates from 110-242 Vac, 47-440 Hz, single-phase source and provides outputs of +5, +3.3, and ±12 Vdc, plus +5 Vdc standby. Efficiency is typically 75%. Manufactured to NAVMAT component derating guidelines, Model 56SQ1 includes EMI...

Read More »
Welding Power Source features lightweight, portable design.
AC to DC Power Supplies

Welding Power Source features lightweight, portable design.

Weighing 40 lb, CST(TM) 280 Stick/TIG Welding Power Source provides output of 280 A/31 V at 35% duty cycle or 250 A/30 V at 60% duty cycle. Users can select between high and low voltage inputs to accommodate domestic and international requirements. If the arc start requires additional output amperage, Adaptive Hot Start(TM) automatically provides it, preventing electrode from sticking and...

Read More »

All Topics