AC to DC Power Supplies

AC to DC Power Supplies

AC/DC Power Supply suits industrial and medical applications.

Providing output power of up to 1,000 W over input range of 85-264 Vac, Model fleXPower X10 can also deliver 2,400 W at high line using its double deck feature. Power supply also provides separate 5 V standby output to supply critical monitoring circuits and features multiple logic signals such as global inhibit, AC OK, and DC OK. Operating over temperature range of -20 to +70Â-ºC, product...

Read More »
AC to DC Power Supplies

AC/DC Power Supplies target distributed power applications.

Available in 1,200, 1,600, and 2,000 W models, D1U-W Series front-end power supplies are 1U high, RoHS-compliant, hot-pluggable, and support redundant applications. Units feature 12 or 48 V main output with 3.3, 5, or 12 V standby voltage options. They provide active current sharing on main output, I2C bus with status indicators, plus over-voltage and over-temperature protection. Measuring 304.8...

Read More »
Midspan powers wireless and WiMAX access points.
AC to DC Power Supplies

Midspan powers wireless and WiMAX access points.

Suited for applications implementing 802.11n standard that require up to 24 W of power, POE30U Series 30 W 1-port midspan features diagnostic LEDs and outputs equipped with short circuit and overload protection. DC output voltage is 56 V with overload detection to 0.55 A, and AC input range is 90-264 Vac, with voltage rating from 100-240 Vac and AC input frequency from 47-63 Hz. Applications...

Read More »
BEAR Power Supplies' AC/DC Converter Meets GR-1098 Lightning Criteria for Telecom Equipment
AC to DC Power Supplies

BEAR Power Supplies' AC/DC Converter Meets GR-1098 Lightning Criteria for Telecom Equipment

New tech note details results of lightning surge test for BEAR's rugged miniature switching power supply Phelps, NY- October 4, 2006- BEAR Power Supplies (www.bearpwr.com) has tested its standard 15-watt encapsulated AC/DC converter and found it to pass the high-voltage lightning surge tests as defined by the GR-1089 Standard for Telecom Equipment, Section 4.7, Lightning Criteria for Equipment...

Read More »
AC to DC Power Supplies

Power Supplies have 12 V distributed power architecture.

Model D1U 1600 front-end ac/dc power supply delivers up to 1600 W at 220 Vac and 1200 W at 110 Vac, while Model D1U 1200, with 91% efficiency, offers up to 1200 W at 220 Vac and 900 W at 110 Vac. Using high-density dc/dc packaging techniques, units maximize space and reduce heat generation in systems. Features include N+1 redundancy, hot-swapability, active current sharing on main output, I2C...

Read More »
AC/DC Power Supply fits in standard VME system backplane.
AC to DC Power Supplies

AC/DC Power Supply fits in standard VME system backplane.

Providing 4 outputs used in VME systems, Model 56SQ2 delivers 300 W of power at full load, with operating temperature of -55 to +85°C measured at thermal seating plane. Unit operates from 110-242 Vac, 47-440 Hz, and can be configured for single-phase or 3-phase source, which provides outputs of +5 Vdc, +3.3 Vdc, ±12 Vdc, and +5 Vdc standby. Manufactured to NAVMAT component derating...

Read More »
Inverter Power Supplies come with guns and consumables.
AC to DC Power Supplies

Inverter Power Supplies come with guns and consumables.

Suited for thin-gauge aluminum, stainless steel, and steel applications, Millermatic® 350 and 350P inverter power sources integrate Centerfire(TM) consumables and Bernard® 15 ft Q300 MIG guns. Both models offer 208/230/460 or 460/575 V single- and 3-phase input power; 60% duty-cycle rating at 300 A/32 V; 25-400 A output; and LVC(TM) (Line Voltage Compensation). Pulsed MIG welding...

Read More »
Welding Power Sources deliver single-phase power.
AC to DC Power Supplies

Welding Power Sources deliver single-phase power.

Shopmate(TM) Models 300 and 300 DX welding power sources feature range of 5-400 A (250 A at 60% duty cycle) and operate under single-phase power (208/230 Vac or 230/460/575 Vac). Model 300 DX operates in CV (MIG, FCAW) and CC mode (DC TIG and Stick), and includes process selector switch. While 300 model is CV-only, both models offer inductance arc control for MIG welding. Welders include 10- or...

Read More »
DIN Rail Power Supplies operate from -40 to +70°C.
AC to DC Power Supplies

DIN Rail Power Supplies operate from -40 to +70°C.

Designed for snap-in mounting on standard TS-35 DIN rails, RoHS-compliant BP7 Series ac/dc Power Supplies are available in 5, 10, 15, and 30 W models. With universal input of 90-264 Vac, single-output units produce 3.3, 5, 12, 15, 24, and 48 V. Enable connection allows remote on/off without need to route primary ac power to enclosure control panel. Active inrush current limiting minimizes...

Read More »
AC to DC Power Supplies

Power Supply powers and charges mobile electronics.

Connected to power jack on portable device via one of 8 included adapters, myPower(TM) ALL MP3400 extends run time for mobile device and simultaneously recharges its battery. Voltage selector lets user choose correct input voltage for connected device, from 5-19 V, while voltage lock ensures voltage does not change while battery is powering or charging device. Weighing 15.9 oz, product fits into...

Read More »

All Topics