AC to DC Power Supplies

LED Driver suits low bay, street, and architectural lighting.
AC to DC Power Supplies

LED Driver suits low bay, street, and architectural lighting.

Integrating power factor correction and isolated step-down AC-DC power conversion in single stage, Model NCL30001 is suited for designs that require 40-150 W. Offline LED driver operates in continuous conduction mode and can be configured as constant current or fixed output voltage driver. Housed in SOIC-16 package, device has adjustable operating frequency of 20-250 kHz and adjustable current...

Read More »
AC to DC Power Supplies

600 W AC-DC Power Supply is approved for medical/industrial use.

Model LCM600Q is 24 V power supply rated for 600 W of adjustable output power at 25 A, with 7.41 W/in.-³ output power density. Operating at efficiency of 88% typical at full load, it accepts input voltage range of 85-264 Vac with no minimum load requirement and is equipped with active PFC rated at 0.99 typical to minimize input harmonic current distortion. Unit is protected against overvoltage...

Read More »
AC to DC Power Supplies

Configurable Power Supply combines power density, reliability.

Able to deliver up to 600 W of output power with no minimum load requirement, -µMP4 (MicroMP4) 1U AC/DC power supply has 13.9 W/in.-³ power density and up to 91% typ operating efficiency at full case load. Up to 4 modules with outputs from 0.9-60 V can be mix-and-matched for diverse configurations. Unit accepts 85-264 Vac input, and active PFC, rated at 0.99 typ, minimizes input harmonic...

Read More »
AC to DC Power Supplies

External AC/DC Power Supplies serve medical, IT applications.

Offering efficiencies up to 94%, AEF and AFM series comply with various energy efficiency standards and have max no-load power consumption of less than 0.5 W. AEF series is comprised of 100, 120 and 150 W models with single output covering voltages of +12, +19, +24, or +48 Vdc; 150 W model also offers +36 Vdc output. Rated up to 120 W, AFM series provides +12, +15, +18, + 24, or +48 Vdc output.

Read More »
Multiprocess Welding Power Source offers energy efficiency.
AC to DC Power Supplies

Multiprocess Welding Power Source offers energy efficiency.

Flextec(TM) 450 features Flexible Technology(TM) that delivers up to 500 A welding power. Portable system is capable of stick, Touch Start DC TIG-®, MIG, and flux-cored welding, as well as arc gouging with up to 3/8 in. carbon. Featuring compact, IP23-rated case, it has sunlight-readable digital ampere and volt meters and selectable hot start allowing operator to turn it off for thin materials...

Read More »
DIN Rail Power Supply is rated at 30 W.
AC to DC Power Supplies

DIN Rail Power Supply is rated at 30 W.

Enclosed in 2.09 x 3.76 x 2.19 in. plastic case that snap-mounts onto DIN rail, model DSP30-24/277A operates off AC input from 100-277 Vac and provides 24 Vdc output at 1.25 A. Output voltage is adjustable from 24-28 Vdc via front panel potentiometer, and 24 V peak-peak square wave output, in sync with AC line frequency, can be used as system clock for timing applications. Operating with 87% typ...

Read More »
Medical Power Supplies deliver 200 W of continuous DC power.
AC to DC Power Supplies

Medical Power Supplies deliver 200 W of continuous DC power.

Approved to UL 60601-1, CSA C22.2 No. 601.1, and EN 60601-1 medical standards, TMC200 series measures 3 x 5 x 1.5 in., operates from 90-264 Vac input, and withstands voltages of 4,000 Vac from input to output, 1,500 Vac from input to ground, and 500 Vac from output to ground. Features include power factor of 0.98 typical and earth leakage current of 220 -µA at 264 Vac, 63 Hz. Series includes 7...

Read More »
AC to DC Power Supplies

Swagelok® Welding System M200 Power Supply Receives 2010 Golden Gas Award

SOLON, Ohio --In recognition of its contributions to gas systems technology, the Swagelok-® welding system M200 power supply has been honored by Gases & Instrumentation International in its 2010 Golden Gas Awards. The M200 power supply received the only Gold Award in the weld category. The Golden Gas competition evaluates products on their ability to solve an important challenge to the gas...

Read More »
Desktop Switching Power Supply is CEC Level V compliant.
AC to DC Power Supplies

Desktop Switching Power Supply is CEC Level V compliant.

Measuring only 6.69 x 2.64 x 1.42 in., PA1120 series external power supplies offer 120 W of output power with any voltage set-point ranging from 10-48 Vdc with 3 IEC-320 C6, C8, or C14 AC inlet options. Features include universal AC input, active PFC for EN610000-3-2 Class A compliance, and LED power-on indicator. CE marked units have international safety approvals including UL/cUL 60950-1,...

Read More »

All Topics